[a / b / c / d / e / f / g / gif / h / hr / k / m / o / p / r / s / t / u / v / vg / vr / w / wg] [i / ic] [r9k / s4s / vip / qa] [cm / hm / lgbt / y] [3 / aco / adv / an / asp / bant / biz / cgl / ck / co / diy / fa / fit / gd / hc / his / int / jp / lit / mlp / mu / n / news / out / po / pol / qst / sci / soc / sp / tg / toy / trv / tv / vp / wsg / wsr / x] [Settings] [Search] [Home]
Board
Settings Home
/k/ - Weapons



Thread archived.
You cannot reply anymore.




File: 20171106_114905_HDR-1.jpg (1.23 MB, 3606x1387)
1.23 MB
1.23 MB JPG
/arg/
AR thread
Bullyzone
Tripfag containment

Carry handle edition

Old >>39395466
>>
File: 20180419_081148.jpg (1.81 MB, 3024x1701)
1.81 MB
1.81 MB JPG
>>39401043
I'm going to throw away my ACOG and replace it with a carry handle.
>>
File: 1387926784444.jpg (326 KB, 1200x773)
326 KB
326 KB JPG
>>39401062
Offset your acog in case the iron sights fail.
>>
File: 20180801_214841-2320x1305.jpg (583 KB, 2320x1305)
583 KB
583 KB JPG
>>39401062

Hey bb how you been?
>>
File: IMG_1621.jpg (1.31 MB, 1630x1065)
1.31 MB
1.31 MB JPG
>>
File: Nuclear_winter.jpg (787 KB, 1080x1721)
787 KB
787 KB JPG
>>39401043
Did someone say carry handle?
>>
>>39401043
I dont know why but I really like the look of a carry handle on that SCAR
>>
this is sandnigger AR say some nice about it
>>
>>39401386
I can't
>>
>>
Looking at building my first AR in 5.56. PSA lowers are on sale, do you guys buy stripped or complete?

Specifically looking at a PSA stealth lower or PSA 1728 lower, are the differences purely cosmetic?
>>
>>39401386
Its made in the US by the caracal company
>>
Would a Saint Edge be a retarded first AR? Could I build one of the same quality for like $400 less?
>>
>>39401464
>Would a Saint Edge be a retarded first AR?
Yes
> Could I build one of the same quality for like $400 less?
no
>>
>>39401479
An impasse.
>>
>>39401450
>caracal company
the company own by UAE right ?
>>
>>39401575
yes
>>39401541
If you have the $1000 or whatever a saint edge goes for these days you could build a much better AR to your likings.
>>
File: RS556.jpg (102 KB, 1500x472)
102 KB
102 KB JPG
any comments about this ?
>>
File: 20180929_143953.jpg (1.2 MB, 2185x1813)
1.2 MB
1.2 MB JPG
>>39401420
Buy stripped so you can get the experience of building it. Makes upgrading things like triggers and selectors less daunting in the future if you put them in the first time. Check out the PSA EPT lpks and lower build kits. EPT trigger isn't actually too bad for an enhanced mil spec essentially. Only difference between those lowers is cosmetic.
>>
>>39401706
Its hideous.
>>
>>39401706
Looks like something WGWS would buy
>>
>>39401706
It looks like what a non bullpup aug or a more M4 like SG552 would look like.
And it makes me cum buckets
>>
>>39401420
Both are just fine functionally

pick one that looks better to you


Also if this is bbs first AR, buy a complete lower and upper, unless you're ready to buy specialty tools and tooling.
>>
>>39401062
What manufacturer is that?
>>
File: 20181011_114823.jpg (3.87 MB, 3032x2274)
3.87 MB
3.87 MB JPG
>>39401285
Why is the AR-15 and Hi-Power such a good combo?

Also first AR-15 how'd I do /arg/?
>FN chf barrel
>Franklin BCG and lower (binary)
>SP1 carry handle upper receiver
>Almost everything on upper is Luth A1 retro parts, except for the 601 charging handle
>Blackwood triangle set

Also- why the fuck does almost every AR-15 armorer's kit not have fucking snap-ring pliers jesus christ.
>>
>>39402096
Looks like shit like every other service rifle build
You could have bought something useful but instead you built this incorrect abortion because "muh vidya xdd"
>>
>>39402096
Is your front sight F marked?
>>
>>39401043
ITT: BARBIE DOLLS FOR PLAYING PRETEND.

>and den, I shot da bad guy
>and den, deres another bad guy
>and I shoot him too
>and den, I get my big gun with a silencer
>and den, I shoot the next bad guy

Seriously, the West is dying, the White Race is dying, and you fucking man-children sit here playing with your toys you never even use. Fucking pathetic. No wonder white women are turning to black and brown men, who are actually adults.
>>
>>39402140
What the fuck are you doing to "save the white race"
People cant have hobbies because you're racist?
Take a look at your miserable life and think things through.
>>
>>39402140
Fuck off /pol/nigger, you’re even worse.
>>
File: havingfun.png (30 KB, 500x301)
30 KB
30 KB PNG
>>39402168
>People cant have hobbies because you're racist?
>>
File: 20181011_121402.jpg (919 KB, 2240x2220)
919 KB
919 KB JPG
>>39402123
Yup.

>>39402116
I mean I already have the essentials, what's the point of having 10 carbon copies of the exact same gun? Even if said gun is top of the line.
>>
Is this 300 Blackout thing a meme or is it the new and improved AR10?
>>
File: 1497913773207.jpg (834 KB, 1800x1200)
834 KB
834 KB JPG
>>39402168
he's mad that he can't afford to have hobbies.
>>
File: DSC_2506.jpg (1.02 MB, 1800x1200)
1.02 MB
1.02 MB JPG
>>39402248
>Is this 300 Blackout thing a meme
yes
>is it the new and improved AR10?
what
>>
>>39402235
>F marked front sight
>A1 sight
idiot
>>
File: 1534386844117.jpg (150 KB, 1511x2015)
150 KB
150 KB JPG
>>39402248
>Is this 300 Blackout thing a meme
Yes
>or is it the new and improved AR10?
Imagine you took the worst features of 308 and 5.56 and put them together.
>>
>>39402096
>>39402235
oh wow
>>
>>39402266
Welp. Not like I can't buy and replace it, next thing on the to-do list.

>>39402288
Yeah I know I fucked up, but at least it's an easy fix. Just slip the front sight off and pop an A1 sight on and pin it. ez pz.
>>
>>39402308
that's not how that works retard
it's already been drilled
you can't just put a new one on
>>
File: 1529973839216.gif (1.51 MB, 740x631)
1.51 MB
1.51 MB GIF
>>39402308
That's not how it works ya dip.
>>
>>39402344
>it's already been drilled
Okay? I can assure you drill-bits don't change diameter every time they're used.

>you can't just put a new one on
But you can, you just don't want to be quick and haphazard about it.

>>39402347
I'll make it work. If not, it's not like FN barrels are too expensive to just pick another one up. It's about the learning experience. Or something.
>>
>not just getting barrels from Karl with pinned gas blocks and straight gas tubes
>>
File: 20180929_193252.jpg (1.24 MB, 2981x1633)
1.24 MB
1.24 MB JPG
>>39402248
300blk is not a meme. SOF uses it for night raids. It allows you to get AR ergos, accuracy, manual of arms, in barrels shorter than 10", with ballistics akin to 7.62x39 for supers, and .45ACP for subs, in such a way that you can switch between supers and subs as easy as changing a mag.

I'm a fan.
>>
How do you guys set up your slings? I've wasted a shit load of money on qd mounts trying out different setups and no matter what I do the sling still gets in the way of bathroom selfies

So far I've tried the sling attached:
>muzzle and and buttpad end
>barrel nut and buttpad
>barrel nut and end plate
>muzzle end and end plate

I know I just need to go innawoods more but what do you cunts use
>>
>>39402389
but how am I supposed to get better at building rifles if all I do is slap a complete lower to a complete upper?
>>
>>39402397
Shouldn't you be eating a dog while rubbing your hands together.
>>
File: 74pom3q307o01.jpg (1.71 MB, 3558x2628)
1.71 MB
1.71 MB JPG
>>39402404
You leave the upper on the the lower when changing barrels. Just pull two bolts. Shits cash as fuck
>>
>>39402308
>Just slip the front sight off and pop an A1
Except barrel diameter
>>
>>39402397
>SOF uses it for night raids

[Citation needed]
>>
>>39402397
So in effect you get two lackluster cartridges in one rifle!?!
>>
>>39402397
>with ballistics akin to 7.62x39 for supers, and .45ACP for subs
Two calibers known for excellent external ballistics
>>
>>39402397
>with ballistics akin to 7.62x39 for supers
Maybe out of a draco or something similar
>>
>>39402397
>I'm a fan.
How many rounds do you have through your new build?
>>
>>39402440
Shit you right. Pencil profile. So I assume the only option is to look for a non "F" marked front sight post.
>>
11.5" AR pistol vs 14.5" rifle? I've already got a 16" recce style build so I was looking for something to put a red dot on.
>>
>>39402502
Do an 11.5
>>39402500
Pull the barrel off of the thing and make a high quality A2 clone with it
Use one of the brownells pencil barrels to restore this heap of shit back to LE SERVICE RIFLE
>>
File: blk out.png (45 KB, 1788x148)
45 KB
45 KB PNG
I can believe some silly nig said this
>>
>>39402502
11.5 if you want something truly different than your 16".
The difference between a 14.5 and 16 is not as drastic as Wuggy wants it to be.
Dont get me wrong, 14.5 is great but like I said the 11.5 would go nicely with your recce and would be more different.
>>
File: 20180828_182141-resized.jpg (1.63 MB, 3024x1701)
1.63 MB
1.63 MB JPG
>>39401216
Pretty good man. I've got nothing to complain about. How about you?

>>39402013
FN

>>39402502
I'd go 11.5". As much as I like 14.5", if you've already got a 16", you might as well just go with a pistol/SBR then.
>>
>>39402430
Damn thats nice. I cant wait till I have my lmt pistol upper.
>>
>>39402559
>shit talks lmt
>now he wants one
pottery
>>
best stanag style magazines?
I hear Brownells makes good ones and that the SCAR 16 magazine fits in ARs and is good
>>
>>39402513
>>39402536
>>39402550

Thanks for the advice.
>>
>>39402513
>16" barrel
>A2 clone
And you call him retarded...
>>
File: 20180815_210235.jpg (249 KB, 974x974)
249 KB
249 KB JPG
>>39402550
How does your upper shoot? Been looking at getting a SOCOM 14.5 upper from BCM with an A2X P&W.
>>
Still need optic ideas for the pistol. Im thinking another lpvo.
>>
>>39402248
300blk is only good for a few things, but in its niche nothing else compares
>>
>>39402652
8.6 creedmoor coming
>>
How much should I pay for a used vortex razor hd gen 2 1-6?
>>
>>39402633
I like it, and I've had a few BCM barrels and I've liked them all so I'd say go for it. I'd go with a NT4 and spacer if I were you though. At least if you have any desire to suppress it down the road. Or just go with a FH556RC if you've got the cash.
>>
File: Snapchat-1082902236.jpg (38 KB, 720x960)
38 KB
38 KB JPG
>>39401285
>>39402096

Mine's a '72 (or '74 I cant remember) colt sp1.
And don't worry I've still got the original furniture, I've just got the wood on it temporarily for fallout memes
>>
>>39402222
Epic quads and post
>>
>>39402525
Well WGWS is literally a brain damaged dumbass, so it's not surprising
>>
>>39402697
I don't have a gunsmith near me tho so thats why i was just gonna go with the A2X.
>>
File: 20181009_113519.jpg (2.74 MB, 4032x3024)
2.74 MB
2.74 MB JPG
>>39402678
It would only be a practical choice if it becomes widely available and comparable in cost.
>>
>>39402633
>SOCOM 14.5
Dont do this
The ounces are real
WGWS memes aside do the ELW
>>
>>39402759
>widely available
By people who arent the sperglord who runs Q
>>
>>39402761
I already have a KAC RAS so thats why I am looking into a SOCOM 14.5 upper. If I can sell the RAS then I'd consider going the MCMR route, or a 14.5 upper with a DD RIS II
>>
>>39402725
I gotcha. You can always have it sent out if you'd like, but I get where you're coming from.
>>
>>39402792
Just got MCMR or MK8/14 instead in all honesty.
>>
>>39402500

You could probably have ADCO reprofile the barrel and FSB to an A1 approximation. But then your gas block journal would like fucky.
>>
>>39402794
>>39402805
Actually am messaging a dude right now who has a DDM4V5 with an MCMR on it for $525. Is that a decent deal?
>>
I like the idea of an FAL or a G3, but I can build an AR-10 for so much less. What sort of stuff would you put on a "main battle rifle" sort of build?
>>
>>39402550

Been aight. Just took a low light pistol class. The guy owes me another class so I'm going to wait and see what he's got.
>>
>>39402854
The $899 G3 clone will be better than the $899 AR
AR10 shines as a dmr
There are better battle rifle choices
>>
>>39402700
Very nice, I was thinking of getting a drop-in trigger for an SP1 but decided to go with the binary lower instead. Personally I'd rather have a lower that works in unison with the trigger + bcg. Also I like the added bonus of the third position, something just feels nice about it. Also what year hi-power?

>>39402826
Honestly an A1 build was not my original plan or even a NCR service rifle, I saw the binary lower on sale for $499 and snagged it then and there and everything else just came after.
>>
>>39402877
'54 I think. The finish on her is terrible because some bubba around here carried her for years.
Got it cheap tho, $300
>>
>>39402830
For just the upper? Unless it's never been shot, pass.

>>39402862
Nice. That actually sounds like a lot of fun. I wish I had more time and money right now for some classes. I've been working on getting my GIS certs and then I wanna throw some money at a nicer GPS unit and drone.
>>
File: 20180806_184711.jpg (1.73 MB, 1747x2376)
1.73 MB
1.73 MB JPG
>>39402248
It is a meme. I wouldn't compare it to an AR-10, performance wise, I would compare it to sub-guns.
>>
>>39401706
neat AUG scope
>>
File: 3 things.jpg (3.92 MB, 3896x2496)
3.92 MB
3.92 MB JPG
>>39402984
Do you own any non shit guns?
>>
File: 20171224_104801.jpg (3.44 MB, 4032x3024)
3.44 MB
3.44 MB JPG
>>39403601
do you?
>>
File: 1538979794075.jpg (41 KB, 338x654)
41 KB
41 KB JPG
>>39402140
This is bait but why don't you build an AR and go to South Africa or are you too scared to try to do anything to save muh white rice?
>>
File: All poly all the time.jpg (3.66 MB, 3992x2276)
3.66 MB
3.66 MB JPG
>>39403610
Trip on Darkred :^
>>
>>39403633
Why do you keep posting this shitty bullpup?
>>
>>39403645
Because he is a no AR.
>>
File: 20180922_171731.jpg (1.41 MB, 1557x2037)
1.41 MB
1.41 MB JPG
>>39403633
>darkred
i dont even know who that is, m8
>>
>>39403658
It's sad that someone with no AR would spend this much time in an AR thread.
>>
Are MBUS pros worth? I got a cheap MBUS set when I first built my AR but they look like dog ass on my new rail and the rear sight body actually interferes with the charging handle space which is an insane oversight for an item you'll likely not need often.
Should I save another 50 bucks for something else better that I'll likely never use or should I just spend the 120 for the mbus pros that I'll likely never use?
>>
>>39403693
mbuspro is good to go
If you want to budget it out buy a KAC USMC rear off ebay and MBUS pro front.

Its your rifle, if you dont like how it looks theres no reason not to change that.
>>
>>39403601
No :^)
>>39403693
Mbus pros are definitely worth the investment.
>>
pistonfag here
is the POF anti-tilt tube any good?
>>
>>39403747
PWS better but you shouldnt be piston fagging at all
>>
>>39403755
thanks
i wouldn't be pistonfagging but am prisoner in a cuckstate
>>
File: wtf.webm (167 KB, 638x480)
167 KB
167 KB WEBM
>>39403645
>shitty bullpup

It was THE bullpup since the late 70's. Don't knock the rifle because you hate the poster.
>>
>>39403785
Its a poor rifle, why do you think countries are dropping them left and right?
>>
>>39403791
What bullpup are they replacing them with?
>>
>>39403804
The LMT NZ16
>>
I want a tavor.
>>
>>39403806
>shitty bullpup
>countries dropping them left and right
>aktcually its just New Zealand
>and they are not even replacing it with a bullpup at all

OK...
>>
>>39403819
Face it bullpuplet your time is over, even the irrelevant countries are moving towards traditional rifle layouts
>>
>>39403697
You think the KAC rear is probably a better piece than an MBUS pro? The MBUS sits flatter on the gun but that KAC in used condition gives feels.
Knights Armament seems like they make good shit and it's basically the same cost of the mbus pro rear
>>
>>39403601
says the guy with shitty meme guns.
>>
>>39403861
Better piece? Nah
Better price? Yeah

The KAC rear if you can steal a deal if not there would be nothing wrong with a mbuspro
>>
>>39403850
>even the irrelevant countries are moving towards traditional rifle layouts

I guess Australia didn't get the memo.
>>
>>39403900
They couldnt read the text because it was upsidedown
>>
File: 1539036699494.webm (561 KB, 594x596)
561 KB
561 KB WEBM
>>39403813
my jewish friend likes it, webm related.
>>
>>39403953
They look like real life fallout raiders
>>
>>39403987
out in dade county anything goes.
>>
>>39403987
>>39404007
There should be a Fallout: Florida
>>
>>39404040
There's a significant mod coming out for Fallout 4 based in Miami and it looks really good
>>
>>39404040
>>39404061
couldnt think of a better place for a fallout setting senpai.
>>
>>39404075
Malaria for everyone!
>>
How are these rounds fellas? Are they junk or is this a good buy?
https://www.targetsportsusa.com/federal-american-eagle-556mm-nato-ammo-62-grain-green-tip-penetrator-bulk-1000-rounds-xm855cs-p-2378.aspx
>>
>>39404116
Can you shoot steel core where you go pew pew pew?
Many ranges do not allow it.
>>
Are AR10's pretty much just SASS rifles? What else are they used for?
>>
>>39404116
Steel core so indoor ranges will jew you but also 30 cents per round is market rate brother, you can get federal 55gr for like 27 cents per round regularly.
>>
>>39404195
Hunting
>>
>>39404195
Pretty sure you aren't allowed to use AR-10s at Cowboy action shooting events
>>
File: steel.jpg (2.86 MB, 2344x3712)
2.86 MB
2.86 MB JPG
>>
>>39404167
I just shoot inna woods
>>39404209
I have some plinking ammo, I was hoping this would be better than that stuff. It said law enforcement and NATO used it, so I thought it might be better than range ammo
>>
>>39404338

That Elcan deserves a much better home than those flavor of the month hobby builds.
>>
>>39404370
xm855 is generally regarded as being less accurate than xm193
>>
>>39404383
only NPCs build by the book clones
>>
File: 20170604_121042.jpg (3.37 MB, 4032x3024)
3.37 MB
3.37 MB JPG
>>39404383
>flavor of the month
get fucked m8
>>
>>39404398
that's something a russian bot would say
>>
File: 1539290672155.jpg (4 KB, 127x125)
4 KB
4 KB JPG
>>39404417
oof
>>
>>39404398

Implying those two aren't prime examples of procedural generation run amuck.
>>
What’s the best AR/AR brand for under $1000

I’m an AK guy and was looking at a 74, but I’m scared about future ammo avaliability of 545, so I’m going over to the good guy side.

Walk me through this?
>>
>>39404417

Nice binary trigger dude, your builds are still gay af. Sorry, but that's the truth.
>>
>>39404426
nice thumbnail
>>
File: FB_IMG_1537132182485.jpg (79 KB, 1080x721)
79 KB
79 KB JPG
>>39404451
Why not get an AK in 5.56? But is that 1K budget with or without optics?
>>
>>39404451
BCM
>>
>>39404007
Fallout 305
>>
Well the good news is that my new AR build doesn't blow up when I pull the trigger. The BAD news is that I have no idea where the bullets are going. I can't even begin to correct the sight because I can't hit my gong at 10 yards. I'm gonna have to take it to the range where I can put up some paper.
>>
>>39404518
Get one of those cartridge shaped lasers.
>>
>>39401706
The AUG scope is neat but I don't like skeletal stocks like that. Looks super uncomfortable.

I don't hate it overall.
>>
>>39404485
I just kind of want to branch out a little from the AK platform. I know and love you, but I don’t want to be a one trick pony.

Plus, the ergonomics on the AR are plainly superior. I don’t even know how AK guys try and make this point.

>>39404487
I was looking at them but aren’t they well over 1000
>>
File: 20181003_124141.jpg (1.02 MB, 1126x2001)
1.02 MB
1.02 MB JPG
>>39404518
Have any pictures looking down the sights?
>>
>>39404518
Grab yourself a boresight
>>
>>39404393
Hmm. a person I know told me thats what the military uses, so it should be good enough for me. He owns a bunch of firearms, but I cant tell if hes retarded or not
>>
>>39402248
In it's extremely specific niche, it's great. I honestly don't think unless you're night-hunting or doing some spooky spec ops shit that .300 blk is worth building for, unless you just want a cool snowflake cartridge I guess.

There are better snowflake cartridges if you aren't gonna slap a can on, though.
>>
Opinions on the following poorfag AR's?
>Ruger AR556
>DPMS Oracle
>Springfield Saint
>PSA build
>S&W M&P
>>
>>39404587
PSA build
>>
>>39404587
Ruger AR556
S&W M&P
PSA Build (with FN barrel)
My friend has the ruger, my dad has an M&P and I have a PSA FN barreled upper.
All have been good to go in my experience.
>>
Squid when clones rifles of his heroes
>>
>>39404451
This lower: https://aeroprecisionusa.com/ar15-carbine-complete-lower-a2-grip-anodized.html and then add whatever stock you want.
This upper: https://www.bravocompanyusa.com/BCM-BFH-14-5-Mid-Length-ENHANCED-Light-Weight-p/bcm-urg-mid-14bfh-elw-mcmr-13.htm
>>
>>39402140
>caring about slags that would even touch a browno
Look, Anon, I don't know how to break this to you, but any white woman that would date a nig, or a spic, or any of shade of undesirable isn't worth it.
>>
>>39404544
you can just buy the upper an slap into any lower
>>
>>39404618
This is actually a pretty decent babys first build.
This should be what's recommended for newbies
>>
>>39403666
I can feel this thing pulling forward just looking at it. But I am jealous of your elcan.
>>
File: IMG_20180918_200031_742.jpg (836 KB, 1960x1960)
836 KB
836 KB JPG
>>39404587
M&P 15 is what I have. It's been perfectly fine.
>>
File: Aimpoint-Full-Retard-1.jpg (270 KB, 1024x1114)
270 KB
270 KB JPG
>>39404544
Fair points, at that price range you could get a complete Aero Precision rifle. If you want to build, you could get a lot more AR for the same price. All depending on if that 1K is woth or without optics.
>>
>>39404618
>>39404639
You should get permanent install on this if you're not gonna buy an SBA3 for your lower lol
>>
What's the least shitty current brace options?
>>
File: 20181005_101334.jpg (3.19 MB, 4032x3024)
3.19 MB
3.19 MB JPG
>>39404684
SBA3
>>
>>39404616
Where do I get this shirt
>>
>>39404667
I may just build an Aero. I just can’t find an upper with a normal carbine length plastic handguard. They’re all mlok and such
>>
File: FB_IMG_1537742328661.jpg (398 KB, 1152x2048)
398 KB
398 KB JPG
>>39404733
Truck Stop most likely
>>
>>39404827
https://aeroprecisionusa.com/ar15-556-16-complete-upper-fsb-carbine.html
But carbine gas is dumb and free float mlok handguards are nice to have
>>
>>39404587
Add LMT since ash is getting one
>>
>>39404861
Sure he is
>>
>>39404837
>DON'T MESS WITH MY SNAKE
Would frequent this establishment/10
>>
new dead air can is a meme
>>
>>39404843
Why is carbine gas dumb?

I’m going for an Israel style clone btw
>>
Doing's baby's first AR pistol build. Was thinking 300 blk because I'm suppressing it no matter what, but looking through the thread and seeing everyone shit on it has me vaguely concerned. Are people hating on subdonic 300 through a can or just 300 in general? Kind of hard to tell
>>
>>39404877
I actually purchased that one.
>>
>>39404904
if you want a 5.5"-10.5" suppressed ar do 300blk. supers out of a 10" 300blk are going to be noticeably quiter than supers from a 10" 556
>Are people hating on subdonic 300 through a can or just 300 in general?
honestly they hate neither. what they really hate is how they're poor and can't afford a $2000+ AR with $1000 suppressor and $400 in tyranny stamps
>>
>>39404913
A man of truly exquisite taste.
>>
>>39404904
You can kill a deer pretty reliably with 300 blackout so I'd imagine it would shoot a dude just fine
>>
>>39404944
dude but modern 556 can be quieter and heavier just as good than 300blk. same thing with 9mm vs 45
>>
Best affordable buis that aren't polymer??
>>
>>39404971
mbus pro
>>
>>39404932
Okay that lines up more with what I was seeing in my research. Thanks.

Sometimes I forget than even though I trust /k/ more than the majority of 4chan, it's still 4chan.
>>
>>39404986
never doubt your individual research in favor of group-think faggotry
>>
>>39404892
Ridiculously long dwell time means it's over gassed. Unnecessary extra crap dirtying up your gun faster and wearing out recoil parts faster.
>>
>>39404971
ozark armament BUIS, cheap and combat proven.
>>
File: PeakPerformance.jpg (242 KB, 1878x1016)
242 KB
242 KB JPG
rate my rifle
>>
>>39405002
Always looks like shit matey
>>
>>39405002
oof/10
>>
>>39405002
looks like ass
>>
>>39404986
/k/ is the best fun board only because it's the least shit. It's like winning the award for best 3 cylinder compact car.
>>
>>39405002
like you wanted to build an ar10 but didn't realize they were different calibers
>>
>>39405002
Needs more C-More
>>
>>39405030
>fun
Gun
>>
>>39402397
>>39402248
>>39402652

now that we'll be seeing imported 9x39 ammo and parts to let us build ARs in the caliber there's no reason to use anything else for this purpose.
>>
File: JPEG_20180916_183908.jpg (1.51 MB, 3328x1872)
1.51 MB
1.51 MB JPG
>>39405034
>>
>>39405042
Shit projectiles
>>
>>39405057
and no engineered compatibility with the AR platform
>>39405042
retarded slavaboo
>>
>>39405042
show me your imported supersonic 9x39
>>
How do you like the rain cover? Mine didn't come with one.
>>
>>39403697 I did exactly this for my build. Its the best option for a cost effective but still functional and high quality buis set up.
>>
File: URGI Build.png (2.58 MB, 2048x944)
2.58 MB
2.58 MB PNG
>>39405092
>>39403697
My bad forgot the pic
>>
>>39405103
nice ash clone
>>
>>39405137
fuck off noguns
>>
File: JPEG_20180915_231640.jpg (1.4 MB, 3328x1872)
1.4 MB
1.4 MB JPG
>>39405078
It's an anti-glare cover, you plebian
Is also came with a carbon deflector flap
>>
>>39405103
>>39405092
>>
>>39405137
Ash has a URGI? Post your gats nogunzfag.
>>
>>39405103
i like the all black with the tan handrail. good colors

whats the sling?
>>
>>39405165
Blue force gear Padded Sling.
>>
>>39404417
>SPAS 12
Assuming those aren’t airshit, how do they perform? I’ve always thought they were slick but heard they were kinda meh IRL
>>
>>39405153
confirmed ash clone
>>
>>39405153
>>39405164

here you go
>>39403601
>>
>>39405175
The recoil is heavier than a benelli m4
Action is smooth
Controls are retarded
Suicide safety is cool
Hook stock leaves something to be desired
God help you if you lose a hook
>>
>>39405002
>Goes through the trouble of building an M16A4 Clone
>Doesn't buy a USMC marked KAC rear sight

Why would you do this? They're like $50 on ebay for a real one with the right markings.
>>
>>39401412
>no bottom rail cover
>no handstop/afg
wheres the KAC grip criminal scum?
>>
File: BBBBUIS.jpg (605 KB, 1664x936)
605 KB
605 KB JPG
>>39405206
>>
>>
>>39405264
>16" rifle with eotech + magnifier
>bipod
>>
Daily reminder that /arg/ is the worst general on /k/, maybe all of 4chan
>>
File: ComeAndIronItYourself.jpg (439 KB, 1080x721)
439 KB
439 KB JPG
>>39405322
Glad I could help.
>>
File: WP_20171005_001[1].jpg (1.44 MB, 3072x1728)
1.44 MB
1.44 MB JPG
>>39405322
What, are you saying you don't appreciate the quality content generated by Squid's alt, a mentally and physically stunted wallposting kike-chink, and a bunch of impoverished anons?
>>
>>39405252
>the ebay equipment exchange reddit gun deals special
>>
>>39405157
Pretty tactical m8
>>
File: 20180922_152259.jpg (2.46 MB, 2981x1797)
2.46 MB
2.46 MB JPG
>>39405359
>>
>>39405264
nice ash clone.
>>
>>39405431
Thanks!
>>
File: WP_20180622_014[2].jpg (2.31 MB, 3072x1728)
2.31 MB
2.31 MB JPG
>>39405398
Double or nothing fuckboi
>>
>>39405137
Who is Ash?

>>39405103
Specs on that whole build?
>>
>>39405286
PEE_OH_YOO.NUTN
>>
>>39405456
Ever been to Cass? I'm considering a trip to see the Shays running.
>>
>>39405458
Sure
Upper:
Geissele URGI Upper
Elcan Specter OS 4x
Burris Fastfire 3 MRDS
MBUS Pro front
KAC 200-600 meter rear
Streamlight Pro-tac 2 Weapon Light
Arisaka M-lok light mount
BCM mod 3 mlock vfg

Lower:
Aero A2 improved lower
Geissele SSAE trigger
B5 SOPMOD enhanced stock
Blue Froce Gear Vickers padded sling
BCM Gunfighter MOD 3 pistol grip
Lancer Smoke mag
Milspec Parts Kit and Buffer Tube
>>
>>39405536
>Elcan Specter OS 4x
lol
>>
File: WP_20150917_014[1].jpg (1.52 MB, 3072x1728)
1.52 MB
1.52 MB JPG
>>39405501
I stopped by on my way up to Vermont and fulfilled a two and a half decade dream. It's probably my second favorite steam railroad, the company town is well preserved, the scenery is beautiful, and it's a totally unique experience. I was particularly blown away by the sound, shays and heislers sound like they're going 90mph while only managing around 8, and the crew love the absolute fuck out of their whistles and let them rip accordingly. I was lucky enough to ride in the cab and blow the Lunkenheimer 3-chime that I've adored since I was a toddler (https://www.youtube.com/watch?v=Msd_BPp1blU). I suggest staying at one of the old company houses owned by the state park while you're there, and do not miss out on the engine shop tour.
>>
>>39405554
What elcan do you have?
>>
>>39405554
I ended up getting a really good price on it, and my logic is that If i'm in some sort of situation where I had the scope on 4x and needed to immediately shoot at 1x I would just use the top mounted red dot and not take the time to flip the switch. So why pay extra for a feature that will most likely never be touched.
>>
>>39405286
red dot and bipod indicate a bench shooter/range cuck
>>
>>39405559
Sweet, thank you for your time. I'll def see what's available in the company houses.
>>
File: 20160118_174217.jpg (3.89 MB, 5312x2988)
3.89 MB
3.89 MB JPG
New Zealand
>>
>>39405579
You should have bought yourself an acog to save weight
The reason people sell them cheap is because they have all of the disadvantages of an elcan but none of the advantages.
>>
File: 12547780.jpg (179 KB, 1024x768)
179 KB
179 KB JPG
>>39405605
It's basic as fuck but there's nothing like waking up to the sound of distant steam whistles and seeing a crisp West Virginia mountain scene out the window with neat rows of old logging company housing. The only restaurant there also has the best home fries I've ever had.
>>
>>39405613
But acogs dont have shitty mounts or external adjustments
>>
>>39404526
>>39404553

I'm gonna go to a range where I can hang up a big piece of paper and see what happens. I have a free hour to use.

>>39404547

Nope. I have a Holosun red dot. I didn't consider taking it off and tossing my BUIS on, I wasn't planning on putting those on the rifle though.
>>
>>39403953
it's bad that I know who the guy on the left actually is
>>
>>39405613
I'm sure an Acog would have worked b ut I like the look of the elcan more. I'll probably wind up selling it and buying the 1/4 model at some point but its a perfectly serviceable high quality optic for the time being.
>>
>>39405817
Is he a nice fellow?
Does he use an inside voice?
>>
>>39404561
M855 is not as consistently accurate as XM193. The military has moved on from M855 to M855A1 EPR.
>>
>>39405817
when I posted that saying that my Jewish (hes actually greek mixed with cuban) friend likes the tavor, I actually mean hes a friend, to not dox my self he has a connection to my family, where I have met him and has come over to family bbq, no I dont hang around with him regularly or plan to, hes an alright dude when not playing gangster.
>>
>>39406048
LOL WTF? are you related to Stitches? is he really /k/ like he portrays it?
>>
M855 gets its inherent accuracy from the steel core not being centered inside the copper jacket in the same way from cartridge to cartridge
>>
File: skeletons.gif (434 KB, 387x368)
434 KB
434 KB GIF
>>39405632
Get in the TS Gotenibba
>>
>>39405983
Interesting. So what do you all buy for SHTF?
I figure anything would be better than nothing
>>
>>39406092
>related
no, I rarely see him but have hung out at bbqs and have gone shooting, heres a fun fact, I came out in the brick in yo face video, guess who I am lol.

>is he really /k/
he was, dont know if he still is,last time I spoke to him he racked up some charges for weed and concealing a gun in his car.
>>
>>39406168
the nog receiving drugs?
>>
>>39406153

In addition to what the other guy said, M855 isn't even that great at piercing armor, so it's really not that useful in general.

Find a 55 grain loading that your gun likes and stock up on that.
>>
>>39406208
not a nog.
>>
>>39406153
>So what do you all buy for SHTF?
55gr 193
50gr TSX
77gr smk
77gr tmk
75gr gold dot
>>
>>39406231
the best loading also depends on your barrel klenght and twist rate. If you have a long barrel and a slower twist rate than 55 grain is great. but if you have something like a 14.5" 1:7twist barrel then a heavier loading like 77grn is better.
>>
>>39406333
Get you some 147gr eld
>>
>>39401043
>SCAR-L
HAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHA
>>
>>39406409
>147eld
>5.56
what
>>
>>39406409
147grn 5.56?????
>>
>>39406437
>5.56
Gross
>>
File: 20180827_161321_HDR-1.jpg (1.33 MB, 3437x1455)
1.33 MB
1.33 MB JPG
>>39406431
The 17 needed a baby sister
>>
>>39406463
Well, that's a very nice AR you've got there.
>>
>>39401043
Who even needs an AR-15, how small does your dick have be to feel the need to purchase one?
>>
File: 14.5 cardboard 1.jpg (360 KB, 600x1080)
360 KB
360 KB JPG
>>39406531
Microscopic
>>
>>39406531
My dick is huge and I need an AR to lull people into a false sense of security
>>
>>39401043
>all these fags still using 5.56
>not getting with the times and shooting 6.8.
>>
>>39406565
>6.8
.3mm too fat
>>
>>39406231
Will do.
>>39406333
I’ll check them all out.
Thanks fellas
>>39406463
Sick glock
>>39406409
Wat
>>
File: 20180511_213347.jpg (2.46 MB, 4027x2700)
2.46 MB
2.46 MB JPG
Boys...I have the opportunity to buy a DD CHF 14.5 upper w/A2X P&W with a RIS II for $700. It is used but the dude says he only put 200 rounds through it and the pics he sent me of the bore look pristine, should I do it? It's either this or a 14.5 BCM SOCOM (~$500) upper for me at this point.

Also, pic is my old PSA upper which is now sold. Still have the lower but now has a BCM Gunfighter Mod 0 grip, BCM trigger guard, and a Larue MBT on it.
>>
>>39405057
No, it's the .30 projectiles that are shit for 300 subs. There's only one type of expanding ammo available and you don't even know which one I mean (not talking about super expensive lehigh's stuff).
>>
File: 20181008_085451.jpg (1.26 MB, 2525x985)
1.26 MB
1.26 MB JPG
>>39406531
Smol enough
>>
File: IMG_0161c.jpg (1.75 MB, 2048x1360)
1.75 MB
1.75 MB JPG
>>39401706
I hate the Magazine.
Stick a magpul 40 on that thing, geez.

>>39402096
The only thing that would complete this setup is a pile of bobby pins
> mfw I started picking them up off the sidewalk as I was walking, though I have a legit reason, I see the parallel

>>39403850
>>39403819
>>39403804
>>39403785
>>39403633
>>39403900
> someday the barrel will be made of plastic too, and still work.

>>39404667
saved this image as "movie prop.jpg"

>>39405002
looks like a 20"bbl?
if so good job because thats what 5.56 should be shot through. Overall not bad but I think you need a nub for the pistol grip like pic related I found somewhere.
>>
>>39406565
>not going full circle and shooting 7.5 french out of your ar
>>
>>39406623
Neither of those
BCM 14.5" BFH ELW MCMR with an A2X P&W for $650 or whatever it is these days
Sell the RAS you have
>>
>>39406646
>not 7.5 swiss
555-comeonnow
>>
>>39406648
I've looked into that option too, but the ELW MCMR BFH is 750 with an A2X plus extra shipping costs.
>>
File: 1485126761213.png (100 KB, 292x257)
100 KB
100 KB PNG
>>39403915
underrated post
>>
>>39406628
Outlaw or hornady
>>
>>39406665
Keep looking. I got lucky and bought a 14.5 midlength medium profile double chromed barreled upper for $300 +s/h. The BCM final cost is what swayed me to look elsewhere too.
>>
>>39406665
Worth it over a used clone with market bottomed out or an overweight m4gery. If youre going to do a pointless clone atleast do a URGI
>>
I want a good, solid tank (AR). What's the best model for something like that?
>>
>>39402140
What if I have white gf and ar anon what then?
>>
>>39406767
KAC
>>
>>39406793
If your fine with 1.5moa
>>
>>39406692
Hornady
>>
What's different between 855 and 855A1?
>>
>>39406908
the steak sauce
>>
>>39406824
More accurate than anyone ITT
>>
File: compare.jpg (107 KB, 350x327)
107 KB
107 KB JPG
>>39406908
Lead free projectile with an exposed steel penetrator instead of of the shitty steel core old m855 has. The new designs offers better terminal ballistics, better barrier/armor penetration, and is slightly more accurate but not by much. Mk262 is the superior military loading for unarmored targets however.
>>
>>39406908
A1 has higher pressure and different construction - copper folded over a arrowhead instead of a smaller, completely covered steel core.

the effect is that a1 penetrates better and has much, much better terminal effects. it's great ammo, 2bad for civilians lol. just go with some tsx instead.
>>
>>39406908
The A1 is a B.O.F.A.
>>
>>39406955
Not so much
>>
>>39407006
Oh for sure more accurate. If you took everyone on /k/ and told them to make a 1.5MOA 5 shot group unsupported nobody would make the cut.
>>
>>39406993
m855a1 is inherently inaccurate, just like m855 is.
>>
>>39407036
guilty as charged

I can do 6 MOA after 50 burpees tho, I think that's worth more.
>>
>>39407036
What is MOA?
>>
>>39402398
I gave up on qd the mounts, felt like I was losing dexterity while using them. Right now I have a wotg sling but any paracord attachment would be similar. Might give wire loops a try.
For attachment points I prefer
>muzzle and and buttpad end
>>
>>39407083
1 inch at 100 yards
>>
>>39407083
2.909e-4 radians
>>
>>39407091
what does moa stand for, I just see other stuff when I look it up
>>
>>39407104
minute of angle
>>
>>39407104
minute of angle i.e. 1/60th of a degree.
>>
>>39407104
Minute of angle.
Circle is 360 degrees, a degree is 60 minutes, a minute is 60 seconds.
>>
>>39407083
Them fagits just larping playing army at home
Its just bullshit for range fagz
>>
>>39407036
What about supported on a bipod?
With magnification at 100 yards it's quite possible to get to 1.5 MOA.
>>
New

>>39407135

>>39407135

>>39407135
>>
>>39407110
>>39407111
>>39407112
Just wanted to use this moment to say that I love you.
>>
>>39407091
>>39407102
>>39407110
>>39407111
>>39407112
Thanks guys.
>>
File: 1538943163161.png (46 KB, 200x337)
46 KB
46 KB PNG
>>39402140
>the west is dying
>the white race is dying
>but white men with a serious gun hobby are man-children
>and black and brown men are actually adults
Oh look this kike shill was too bad at his job on /pol/ so he's shilling other boards
>>
File: DontUseCreditCard.png (271 KB, 800x500)
271 KB
271 KB PNG
>>39401043
Hey /arg/, hasguns /k/ommando here. Never built or bought an AR before, wanted to get a shitty cheapo first to familiarize myself. Saw these (pic related) on PSA, and thought about getting a prepaid card with $310 on it to buy these, but I need to know if I'll be missing any parts, other than the rear sight and mag.
>>
>>39407039
yes but slightly less so than m855. Its really a shame that their ammo is like that since 5.56 is such a great round for accurate shooting.
>>
>>39404485
Why do these instagram whores always feel the need to include thier cringy tats?
>>
>>39407384
Pls go commie faggot. Would you mom even let you keep that in the basement?!!?
>>
>>39406231
Its better than m193, but ya unless your fighting people in body armor m193 is more accurate.





Delete Post: [File Only] Style:
[Disable Mobile View / Use Desktop Site]

[Enable Mobile View / Use Mobile Site]

All trademarks and copyrights on this page are owned by their respective parties. Images uploaded are the responsibility of the Poster. Comments are owned by the Poster.