>How
Download the package and extract it on some fast drive that have good amount free space (100gb at least). Then
----Run 1stAIdBag_install.bat
--------Install ComfyUI and Manager. This is kinda bare minimum you need to install. You can install workflow's missing node via manager. Some user inputs needed during this.
--------Check if your ComfyUI runs after this. If it does....proceed
--------Install Custom nodes. This will install all custom nodes needed in my workflows, also other workflow's commonly used nodes (this might take some time)
--------Install Attentions. Highly recommend this as they give speed boost for generations.
--------Download essential WAN files and one of the WAN GGUF models (Q8, Q5 or Q2) Better your rig, bigger Q to get
------------NOTE: Downloading these models take time as those are several gigs
--------OPTIONAL: Download QWEN, GIT, or SDXL stuff if wanna play with image workflows

Run comfyui. On the first run it will take some time to load as some nodes like reactor will download some models needed. Once loaded, open the latest version of the workflow, re-select the all the models, vae, clip and loras. This is something you need to do every time you open up a new workflow, so the files point into locations in your computer. See the vid: https://screenrec.com/share/mkgZDHG5uI

After that, check other settings, type in prompt and hit run.

Buy me a beer: https://ko-fi.com/1staidbag

>Already got old install?
----Backup (cut) models and user folders somewhere
----del old ComfyUI_windows_portable folder. Then do as guided above
----paste model and user folders back into your fresh ComfyUI folder after install

>What do i need?
-Windows, RTX card, pref at least 8GB of VRAM, 32GB of RAM, drivers up2date
-You can run stuff with lower rig specs but then you would need lower models, lower resolution, lower clip duration, etc
-There are some info/help to run stuff with ATI cards in prev threads
-NOTE1: Major change on the pack, nothing is pre-installed, all nodes are getting installed via 1stAIdbag.bat now. Pack is now much smaller, 7megs

>If/when you need help....
A) take a screenshot of your whole workflow (and log console window if possible)
B) state what workflow are you using (i'm not going to try fix other's workflows for you)
C) what specs on your rig

>Where to get loras?
https://civitai.com/search/models?baseModel=Wan%20Video&baseModel=Wan%20Video%202.2%20I2V-A14B&baseModel=Wan%20Video%202.2%20T2V-A14B&baseModel=Wan%20Video%2014B%20t2v&modelType=LORA&sortBy=models_v9%3AcreatedAt%3Adesc
(you need to make account and enable show adult content)
https://civarchive.com/search?type=LORA&base_model=Wan+Video+14B+i2v+480p&is_nsfw=true&sort=newest&page=2
(old 2.1 loras that got removed from civitai due to their nsfw bullshit policy)

Old thread(s)
https://archived.moe/r/search/subject/ComfyUI%20portable%20for%20newbies/

Up with ye

Thx for the fix, got it running with attentions installed. What is flash attention?

Thx a lot man

File: 1758235891120793.jpg (77 KB, 1080x1033)

77 KB JPG

what the fucking point to add guide in a request channel? just help people requests or shut up. people still spam bump. so you are definitly useless

>>20360636
some of us have requested to learn how to make them ourselves, so it fits in the request area...

>>20359903
flash attention is kinda like older version of sage. (not really as they work differently). But i incl. it as some older cards don't support sage 2.x. Attentions are like optimizations that take effect when you hit that run button, they split the image noise into smaller blocks so its more vram/ram friendly and also faster...in simple terms

>>20360817
>not trying to do something too fancy
>10 second gens
>720p

yeah....no. Maybe 4-5sec at 480p @ 4steps with lighning loras and Q5 model....and time

anyone know where to get fetish loras like Piss?

>>20360919
yeah I figured, got that from the older threads in the archive, it's why I deleted my post
probably just going add another 16gb of ram soon, even if I don't really understand how that improves the process, it takes less time to gen probably?
If my 4-5 second vids turn out alright and I feel like I get the hang of it I'll just bite the bullet and get myself a new gpu as well

>>20361169
hugging face

Bumps for bag

been trying IAMCCS new FLF2V nodes, but I have a hard time getting nice movements out of it, like with PainterFLF2V nodes.

At least he seems to be actively developping it.

>>20362075
I did try those during the weekend, I got ok motion but loads of colorshifts....if the movement is bad just in the beginning then make sure that first clip is set to first segment (skip previous latent)

File: ruined cumshot ext 02280000.mp4 (3.6 MB, 576x688)

3.6 MB MP4

ive searched civitai and hugging face. cannot find a lora to accomplish the ruined orgasm. this one is from motionmuse and i cant get anything to look like it.
any ideas?

>>20363238
im pretty sure that is penisplay (pworship) lora. I can't remember it that has cum baked in. gonna do some tests and let ya know

>>20362442
For the colorshift, he released a fix yesterday. But that maybe the thing that broke motion since your workflow with the previous node still works fine.

Been tryint to install, unfortenelly huggingface_hub seems not fixed. someway to go around this?

>>20363654
did you do a clean install? and using the intaller on op post? also what card you have

>>20363664
>https://files.catbox.moe/rbwu4v.rar
already noticed that i installed v3! taking care of v4 now! thanks!

>>20363680
that issue should be fixed on v4....but DO FRESH install, don't try to overwrite it over old one (backup your models folder somewhere if you already downloaded them)

>>20363700
already got it running...

whats the best way for face swap or generating images from photos without getting to "ai look".

Used simple reactor for face swap, and SDLX for generating... but the faces get weird.

Sorry, i am really new in this!

>>20363955

>>20351930

File: 03-03_22-00-15_00001.mp4 (2.49 MB, 352x640)

2.49 MB MP4

Does anyone know how to avoid the mini dick after the deep throat? Been trying with other prompts, dick loras, different seed but nothing seems to help
Workflow is SVI

>>20365634
try to prompt at the last segment "at the end woman moves her head away" or "woman licks sucks the tip of the penis" or load some handjob lora and un-load the blowjob one in the last part....

wan can only operate on stuff it can see in the first frame, in svi, you kinda need a bit of luck how the last segment will end (it's last frame will be next segment first one)

do NOT use "woman pulls penis out from her mouth".......or you can, for shit and giggles =). Actually there is lora for penis pullouts, i dunno how good it works on blowjobs

>>20365692
Thanks, good stuff. Seems picky but all logical when you think of it

>>20365723
on svi, prompting is bit tricky...as you have to kinda guess how the scene end in order to prompt the next one....and then there is that luck, some seed might give you perfect results, other some funny wtf moments

>>20363610
ty. also trying to find the "implied bj" one where it shows the back of the womans head. hard to replicate...

File: 15798110936164705_00001(1).mp4 (3.5 MB, 768x768)

3.5 MB MP4

>>20365857
i think the first part is sensual_bj lora rather that pworship (has no cum trained in).....cum part.... tried cumv2 with prompting it oozing rather than shooting......work in progress

Help with missing nodes, I am trying to use the 1stAidbag Anime to real but anytime I try to install the custom nodes ReActor and Layer style I get an error. does anyone have a fix or workaround? I found an Alt for the layer filter but nothing for the face swap and boost

>>20366150
...the installer didn't install Reactor itself?

Because Reactor is a bitch to install. Check your terminal to confirm that the issue is related to insightface (likely) and try the following:

https://github.com/Gourieff/ComfyUI-ReActor?tab=readme-ov-file#troubleshooting

>>20366159
It did not but I just tried to re run install custom nodes and it broke my Comfy so I am going to have to do a clean install anyways so hopefully it will work this time (my 6th time!!!)

>>20366150
reactor is pre-installed and nsfw-patched from installer, so it should work....go you your manager, view custom nodes, and select filter "import failed" click on that and give me some more detail (if you got multiple ones failed list; like pulID, instantID.....then your insightface is not installed)

>>20366175
install comfy, then nodes, then attentions (installs) insight, If reactor still fails, install attentions again....if still fail, gimme some terminal info

>>20366175
>>20366181
Reinstall worked and now Reactor is working, I'm surprised I made it all week without noticing something was wrong.

>>20358908
new to this, is there a particular sage that is better? i have a 5090.

i installed v4, but now my video previews don't automatically play, they are paused. i don't see anywhere in the setting to change it back to how it was before

What do I do about add ons rar? Do I just put it in when I install everything else?

What is the best Lora to create realistic facials and what preset to use ? I tried many with different Loras, settings and prompts but I can never get rid of that digital rendering layer that breaks all immersion.

>>20366565
Got good results with
https://civitai.com/models/1922973/f4c3spl4sh-cumshot-i2v-wan-22-video-lora-k3nk
and this kind of prompt (keep only what you need)
>f4c3spl4sh, Tthe woman starts receiving a cumshot on her face from the penis. The force of the ejaculation is strong. The cumshot splashes on her faces and drips on her breasts as she seems to enjoy having lots of cum on her face. The womans eyes are open as she receives the semen. The camera is positioned close to the woman's face and breasts, capturing the moment of male ejaculation directly onto her face and breasts. The semen is seen forcefully erupting from the penis and landing on her skin, creating a visible pool of semen on her chest.
this gives that kind of result >>20362915

>>20366562
Installer and extract that when needed

>>20366469
Leave it auto. There is also sage3 for 50xx, I dunno if Wan can benefit from it

>>20366475
Do you mean on video combine node, or previews on the left side (assets)

File: 03-04_14-30-22_00001.mp4 (3.01 MB, 352x640)

3.01 MB MP4

>>20365692
>>20366822
Thanks boss for the help, final result is nice

>>20366822
*installer will extract it when needed, you don't need to touch it

>>20366748
Thanks, nice results indeed. I need to work on that basis, obviously the results could be really upgraded with high definition input, Q8 and nothing less than 720p output

>>20366845
Yeah, Q8 and 720p are the limit for my setup, but I can't really use the worstation in parallel anymore if I do that.
Working on a prompt/lora sequence that works and then I'll fire some gens during the night.
Still on the fence for the TripleSampler (on or off)

I can't for the life of me get a consistent flashing set up. just want ladies to take off their tops and show off their tiddies. I can use loras to do all kinds of shit but not a simple flash.

pls send help

File: Screenshot 2026-03-04 100958.png (253 KB, 3239x1698)

253 KB PNG

>>20366822
i mean the previews on the left side.

also, anyone know why this happens? never happened before v4 for me (but i also never used sage until v4 so idk if it is related to that)

>>20366923
Search shirtlift in civitarchive

>>20367212
Does it Gen the videos ok thou? I never seen that error.... I would think it's related to comfyui frontend... But error is titled so it points to clip error

>>20367221
when that error occurs, the video does not generate. i have had it happen twice since i started using v4/sage. i usually have a queue going, so i only notice when i check back and see that it is no longer generating videos.

this particular time, it made about 20 videos before this error happened

>>20367221
it might be related to this?

https://github.com/Comfy-Org/ComfyUI/discussions/12699

some people said a fix is Launching ComfyUI with --disable-dynamic-vram is the workaround.

I a dumb, could someone tell me how to do that lol?

>>20367261
Open comfyui GPU sage bat file with your notepad... Add that line at the the end

>>20367273
thank you, i know it was a very computer-illiterate question

>>20367273
run_nvidia_gpu_SageAttention.bat right?

>>20367284
Yep

>>20367287
like this? or before pause?

sorry for the dumb questions lol

File: Screenshot 2026-03-04 110223.png (17 KB, 1792x263)

17 KB PNG

>>20367297
ugh lol forgot to attach

>>20367261
This might help or not..... I've never quoue 20 gens. But could be after each video you make models don't get unloaded completely or cache get cleaned. So after while ram/vram gets filled with this residue "junk" and you basicly run out of usable memory until you reboot comfyui

>>20367299
Before pause..... After or before that sage part

>>20367303
i have been using v3 for a month or 2 and have literally 1-200 in queue regularly with no problems, so i am guessing is it that problem, assuming comfyui updated when i deleted everything and installed v4

File: Screenshot 2026-03-04 110751.png (16 KB, 2075x232)

16 KB PNG

>>20367311
like that? i just want to make sure i am doing it right so i can better troubleshoot if it does not fix it

>>20367317
That is correct now

>>20367312
Yep comfyui has got quite few updates since v3

>>20367329
yeah and that one just happened a few days ago. that is the only thing google shows me really, when trying to find anything related to "VBAR"

the funny thing is, i had it running overnight, and when i woke up, i knew something was wrong, bc my room was much colder than normal, from it not running haha

fingers crossed

>>20367329
hypothetically, if i cannot get the problem fixed, would going back and doing a fresh install of v3 roll comfyui back? i am guessing not and that it just gets the newest version whenever you run your install bat

>>20367351
V3 installs latest comfy as well

>>20367506
ok so it did not fix the problem. i posted it on github and they said

We found and fixed an issue and it is now likely resolved for you if you update comfy and refresh your requirements.txt

so new dumb question: how do i do that?

>>20367982
i read that you need to run update_comfyui.bat by doing that just gives the message "The system cannot find the path specified."

>>20367999
there are no update bats in my pack....i removed them because 99% of time people would break their comfyui when using it.....always better to backup models folder somewhere and do fresh install

update bat updates comfyui sure.....but it also might change crucial elements (listed in requirements.txt) like torch and cuda version --> attentions will not work. AKA you will most likely break more major stuff just to fix minor issue

>>20368012
ok yeah i figured if nothing else, i will just do another fresh install. hopefully their fix works

>>20368012
oh also, is the point of vacking up the models so you dont have to get them again from your install?

like should i copy them back after it installs comfy, but before installing custom nodes, attentions, and the skip installing the wan and gguf since theyre already backed up?

>>20368029
(i know you explain this in your posy, paste model and user folders back into your fresh ComfyUI folder after install, i just don't know if "after install" means just the first step in installing comfyui, or if you mean after all of the steps are done)

>>20368029
once comfy installed.....but before you do all that that i think there might be easier way to fix your issue (just found the github thread)

just update the aimdo......seems like that is the lib causing the issue, gpu memory leak

close comfy
go into comfyui/python_embedded/ folder
right click and run console
type
>pip install comfy-aimdo==0.2.6
boot comfyui up

File: Screenshot 2026-03-04 155814.png (225 KB, 3549x1648)

225 KB PNG

>>20368040
you might need to explain this like i am a 5 year old lol

i right clicked in this folder, open in terminal, and typed it in and got this

>>20368072
try:
>python.exe -m pip install comfy-aimdo==0.2.6

>>20368082

Python was not found; run without arguments to install from the Microsoft Store, or disable this shortcut from Settings > Apps > Advanced app settings > App execution aliases.

should i just do a fresh install lol?

File: Screenshot 2026-03-04 161409.png (96 KB, 3755x713)

96 KB PNG

>>20368087
ok i did the app setting thing then got this

PS D:\rbwu4v\ComfyUI_apprentice_portable\python_embeded> python.exe -m pip install comfy-aimdo==0.2.6
python.exe : The term 'python.exe' is not recognized as the name of a cmdlet, function, script file, or operable
program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ python.exe -m pip install comfy-aimdo==0.2.6
+ ~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (python.exe:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException


Suggestion [3,General]: The command python.exe was not found, but does exist in the current location. Windows PowerShell does not load commands from the current location by default. If you trust this command, instead type: ".\python.exe". See "get-help about_Command_Precedence" for more details.

so i did that and i think it worked

>>20368115
yep...that should be now updated (and fixed your issues) hopefully

>>20368132
yep after i do a bunch of gens, i'll let you know it it fixed it in case anyone else has the problem

also, bumping my comment that the left side previews don't play automatically like they did for me before v4, in case you know why

if i am just doing several videos, with different images but no change in any other settings, prompt, lora etc, can i right click the vram-cleanup?

i think i read that somewhere before but idk

>>20368012
One thing I did, was modify comfyui to pull all ./model/* folders from a workspace level folder ( ./shared/ ). This is up and outside of my ComfyUI instance. I did the same with inputs/outputs. Now I can spin up a new instance of comfy to mess with if I want to go down a dark path of PIP hell. Or start a clean instance from your pack (./ComfyUI_apprentice_portable_V4/). Life is much happier now.
Working on pushing the instances to docker images now, with Runtime, Lora, and big models all their own images for easy updating.

>>20368142
i don't think they never have autoplay'd?

......consider you queued 20 clips, come back, click assets tab open, and all those 20 vids starts auto playing at the same time.......i don't wan't to even consider it. How hard is it to play play button?

>>20368155
you can save all your models into different drive if you want and use the tool from add-ons folder Easy-Models-Linker.bat

File: 2026-03-05 023618.png (290 KB, 1498x947)

290 KB PNG

>>20368177
mine previews have never autoplayed....and thats good

File: 238554.jpg (43 KB, 640x480)

43 KB JPG

>>20368180

>>20368177
weird, mine always autoplayed in v3, but it would pause any that weren't on screen so i guess it wasn't an issue

idk why it did autoplay for me before

>>20368238
maybe you had some custom node installed that enables that...or maybe it's browser setting...but still don't why would you want something like that

>>20368177
Totally appreciate what you built. It got me into it. I'm still a newbie with the workflows.

I've made something focused on the install/deployment. I hope to share soon.

It's a single ps1 that fully bootstraps everything.

It iterates workflows for missing models and downloads the models (or allows you to skip, also it allows you to cancel and save the portion you already downloaded, then resume)

It then patches the workflow with the model location ( I started using Lora Manager, the folder structure got complicated ). It also has an alias file for old models that are no longer named that way, allowing you to match what are in some workflows, with other models.

Also has E2E testing of all workflows, to make sure they load without error and run (via the api).

Give me some time, i'll post a minimalist version of it. Right now, it's a pretty big repository as a whole. And i'm about to add in Docker support so I can spin up my instances in the cloud or other machines easily.

>>20368364
glad to hear i inspired someone who knows what he does ;) i suck at ps.....seems like you got loads in the oven

make it a good one so i can retire from this project

>>20368412
Thanks Codex 5.3.
I just made a new workspace with it, and we've been iterating all day. I know generally what I want, but it's killing it.

Hi 1st.Ald.bag, one quick question, I have a 5060 and I’m interested in having a workflow img2img just for nudifying, what is the best recommendation to get started with those, I don’t what to spend 5 min waiting for videos to be generated

bump

>>20368942
Try flux klein

>>20368412

are you really going to retire ??

>>20369550
Most likely not..... This thing already grown into me

>>20368142
as far as i can tell, this fixed the issue

>>20369569

ok dont scare us like that :)

How do you load loras for WAN when there is not a high/low? what node do I put it in? or do I need to add one?
This is the lora in question and the workflow I am using is 1stAids Wan2.2(v1.5d)

>>20370182
whatever you do...don't tell us what the lora is

>>20370216
Fuck my bad, I even copied the link to share it, I am still getting used to 4chan

https://civitai.com/models/1269557/better-titfuck-wan-and-hunyuan-versions

>>20370222
>https://civitai.com/models/1269557/better-titfuck-wan-and-hunyuan-versions

that is older wan 2.1 lora....they didn't have high/low parts. try loading it on both, high and low, or just in low loader. Some old wan 2.1 loras work ok, some don't

anyone have igoon latest models??

what's a good "reveal breast" or "take off clothes" lora. most of them i use the quality seems very... plastic?

>>20370378
for what model......wan, flux, sdxl, z-img, qwen...?

>>20370460
i thought we had to use wan 14b loras?

newbie, i know nothing lol

>>20370465
yes...if you use wan, you use wan loras...if you make images with flux, you use flux loras.

but as you didn't state that its hard to give any tips......

for wan tits reveals i would use shirtlift + saggy-tits (and or/nipfix) loras......seek them from civitarchice

>>20370480
>nipfix
what lora is this?

will rolling back my nvidia driver to something earlier mess with comfyui?

i updated to the newest game ready driver and ever since, my screens will go off, computer stays on so i have to hold power button to turn it off. happens randomly while i am doing nothing, and also when i try to use comfy or play a game

>>20370460

for wan. i2v

>>20370617
give Windows Key + Ctrl + Shift + B a try. it forces windows to reload the video drivers

>>20370480

there is no shift lift there. search results come back zero

>>20370659

nvm found it. thanks

>>20370480

https://civarchive.com/models/2233193?modelVersionId=2514015

this one?

>>20370657
>give Windows Key + Ctrl + Shift + B a
thanks, i will def try that next time it happens.

i THOUGHT i fixed it by doing DDU and installing an older nvidia driver, bit it started happening again hours later so idk anymore. i have gone down a rabbit hold of reseating GPU/cables and i is really irritating :(

started getting nvlddmkm errors with latest nvidia driver, and google shows a handful of others with the same problem but nothing conclusive

anyways, this isn't the thread for that lol, it is just that it seemed to happen more often when doing things that use the GPU more, like Comfy or video games

>>20358908
Question:

Do I have to re-install this?
I installed your download when I had a RTX 4070 Super (12GB).
But now I'm upgrading to a RTX 5070 Ti (16GB).

I assume I have to delete and re-install it, correct?

(I've read your ">Already got old install?" reply, so I would do that if I have to.)

>>20365692
Jsut realized another thing to avoid mini dick / disappearing glans
I tried a dick lora without much success, but what you need is a lora with some pullout movement. That way the lora knows how dick looks like without needing one in the first frame
works well here >>20371183

>>20371185
0.8 weight low noise
>Deepthroat/Face Fuck- Wan2.2 I2V.
V3 works well

>>20371119
I don't think that is necessary

>>20371722

is the shirt lift this one

>>20370666

>>20372123
yep....note that it only has high lora, only motion

>>20370677
13th or 14th gen Intel? your CPU could be cooked

>>20372548
amd. i rolled driver back again, this time to the most recent studio driver, and it has not happened since, so i guess i'm, good now

>>20372137

what does that mean?

>>20372838

i think:
newer (2.2) loras have 2 files, one for high and one for low. older (2.1) only have one. try usint it only in high, or potentially on high and low, and see what results it gives

>>20370001

anyone know what lora is used for this?

>>20372997
https://civitai.com/models/2429545/sh00tz-series-of-cumshots

back to top

On svi workflow what is the meaning and difference on always on loras and the lora loader on the scene part?

>>20375001
in simple terms: always on loras are the ones the ones that has not any specific action on them....loras that mainly have appearance aspect like (saggy-tits, mature woman, big dick...etc) those are ok to load on always on loader.....don't load cumshot/any sexual act lora into it for example, even thou you don't prompt it, some loras wanna go active themself (= you get flying cum out of nowhere, ppl humping air....)

Is this gonna be on RunPod or something similiar? My 1060 will take 5-7 business days to do one gen.

>>20375362
you can run it on runpod.....its just a workflow

anyone have access to igoon's newer loras

Hi 1st.AId.bag, have you tried LTX 2.3? It just came out a few days ago. There's also a new DR34ML4Y LoRA thats in beta for it. I would love to test your workflow if you have one :)

Bump

>>20376551
i haven't yet....gonna wait for some nsfw finetune of the model come out before i give it a go

>>20376283
here are some https://huggingface.co/profpeng

>>20377657

hey thank you bag

>>20376551
Why do you need his wf for it? Just use the default one.

Playing around with workflows what is the 1staid_SDXL_IPA.json used for?

>>20377657

how do i get rid of all the moles/freckles? i downloaded the blink stuff and they appear to have a lot of moles/freckles for some reason

bump

File: 68816c9353600f0033f0abc4.jpg (91 KB, 512x768)

91 KB JPG

question and im not sure if i am in the right place.


how would you take an already created image like this hentai image and add motion to it (like the woman riding the cock)? is it the same as using regular loras for real people?

>>20379938
pretty much yeah.....you might want to use just high loras if you want just motion of the lora, low ones might add some real-life details into your gen

>>20378509
try lowering the low lora value

>>20378245
making sdxl image and faceswap

File: 035554_157734377730472601(...).mp4 (1.43 MB, 432x656)

1.43 MB MP4

>>20379938

>>20380169

holy shit. what is this lora?? looks great.

What's the difference between default Q8 and Q8 Remix?

>>20358908
I used to make some generation back in the 2.1 version... since it has been a while thought I'd upgrade to 2.2 and I deleted the old folders without making a backup and I'm getting completely overwhelmed by 2.2. Where can I find the 'default' workflow to get started in 2.2? I found the SVI stuff but I don't really know how to go about that, is it required?
If I dig through the old threads would I be able to make 2.1 work again? Do you happen to remember which was the last 2.1 beginner's pack before you switched to 2.2?

bump?

File: Screenshot 2026-03-11 191526.png (93 KB, 1240x452)

93 KB PNG

This node helps a bit with lower VRAM setups (16Go-)

>>20380647
Have you checked templates that come with comfyui? Only confusing thing about Wan 2.2 is that models and loras are split in two parts

does anyone know how to load nsfw lora's or whatever into wan2gp??

>>20384055
same way like sfw loras?

>>20384093

hey man. can you answer how you did this please
>>20380169

>>20384305
"anime style. pov view. girl having sex in cowgirl position. cum flowing out her vagina as she moves up and down on man's penis"

using dr34mly v2 nsfw lora

>>20384340

thanks babe <3

Bumps

i like to shoop my dick into hot hentai chicks and animate it so it's like they are fucking me. i did one with Zoey from demon hunters and it was so hot!

Need some video guides for all this lol

linux version?

>>20386293
Someone posted Linux script on prev thread

>>20386291
When you first open a workflow, you need to re-select all important model, vae, clips, lora, etc files so the files point into paths on your computer.

This goes with every workflow you get out from the net. Don't worry, this is one time deal, once done, save the workflow

later part of the is to setup automatic settings using iamccs hardware probe, it checks how much how much vram/ram you got, is sage installed and so on. Again, one-time deal, do it and save

https://screenrec.com/share/VFK6ERIhM4

>>20387486
Next step is to open your input image and load some loras that you would like always on during all segments. Load mainly loras that effect on appearance here....like i did, chubby girl and big tits lora. You don't need to load anything here if not needed. But note that you need to load high versions of the lora on the high loader, and low versions on low loader.

DO NOT load loras like cumshot, doggystyle, or any specific action loras as they will be more likely be active even if you don't want them to be.....we load them separate on their own segments when when needed

https://screenrec.com/share/YcOfgwuUdo

>>20387529
resolution and steps are the main things that affect how your output will look AND how long the gen will take. When using lightx loras, 4 steps is enough, thou i've found going 6-8 steps give better results. If you get OOM (out of memory error) lower the resolution and/or use lower tier Q model)

>>20387547
Next part is the make the first segment, make sure you select first segment in wanimagemotion node.. I want her to lift her shirt to show some chubby big breasts (remember these loras are now loaded on always on, so wan knows what to gen) But then the lifting shirt thing......wan likes to make it so that the subject pulls the shirt/top over the head. The lora i loaded to make it more "flashy" like. Reason why i set its the weight to 0.5 is because i know from prev experiments, setting it too high might cause jerky motion.

Why that lora has only high version you might ask....Some loras do. Consider it like this; high loras make the movement/actions, low loras add details. So basically that lora only contains "instructions" how the woman should lift the shirt up......but because we have those nice chubby girl and big tits loras loaded on always on, wan knows whats underneath the shirt.

Getting lora weights/strengths right is a kinda trial and error deal. Most common side-effect on loras on Image2Video is that faces loose consistency. This is kinda unavoidable......to fight against it, try lowering the lora weights (low ones especially) till the point you still get the wanted action. On some loras faces change no matter you do....then try to find an alternative lora

https://screenrec.com/share/p3t5hJWDom

>>20387612
and that is it to make simple short clip of chubby girl lifting her shirt to reveal her goodies, check interpolation on and hit run

(wan makes 16fps by default.....interpolation allows you to basically make frames "in-between" and therefore allow much better and smoother framerate/video. It takes some extra time, but totally worth it)

https://screenrec.com/share/U7EOP2rgFL

File: 012004_157940006968139350(...).mp4 (830 KB, 480x640)

830 KB MP4

>>20387667
this is the basic wan workflow and gen.....but we are using SVI....let's extend it

File: 012857_157101911103041666(...).mp4 (1.57 MB, 480x640)

1.57 MB MP4

>>20387704
now when prompting the next segment, you kinda have to imagine how the previous one would've ended.

enable next extend and prompt it...i used breast_insertion lora (that assumes there are nude tits in the input......and we do as in prev segment we told wan to show them boobies)

some lora like ^^ used here has certain key words or phrases to trigger them to work.... i this case "man (appears) inserts penis between breasts"

https://screenrec.com/share/lPAfHRD3Yr

am i doing something wrong with dr34mly blowjob prompts? they always just put their mouths over it and just lifts their whole head off of it and back down again. . the penis doesn't remain in the mouth lol. any good prompts?

File: emma_ss(1).mp4 (3.72 MB, 576x1024)

3.72 MB MP4

>>20387879

>>20387902

hey man. that was really rude. i was born with this tiny penis

Ald? How do I deal with the nearly endless ungrateful requests? Do ya just blow them off or keep catering to them, seems to be so many people that don't say what they want or even saying please/thank you.

>>20388686
explain

>>20388695
In request threads, dealing with people.

>>20388708
If they're not saying what they want then ignore it

>>20388729

What this guy said.

I tried helping out with an R request, then saw the idiot reposted the image in 3 different threads requesting again after I genned a vid for them. Seen that with a few other images too. R is full of mostly thankless needy jerks (or the same one.. who knows). I would just contribute if you are bored and feel like playing with Wan but not to help them out.

>>20389035

I've seen like 2 or 3 requests fullfilled for this one and here it is again

>>20387873
>>20388939

>>20389035
Yeah, I was experimenting with SeedVr2 in the upscale thread, and those thankless faggots only show respect half of the time. Do it for yourself, it's a nice place to get source material, but the real kicker is when you gen from your irls.

>>20358910
installed ComfyUI and manager with the install.bat. There is no main.py in the ComfyUI folder. run_nvidia_gpu.bat cant run. help

>>20389161
Does installer showing it's getting/installing it.? ....it should start by checking that you have git installed

>>20389437
it was a git thing. got it sorted, thanks

>>20389555
>it was a git thing.
well git gud faggot

>>20389604

Uhm, hostile much?

back to top

>>20389812
It's a term of endearment

>>20390204
back that ass up

>>20390397

Ahh.. Got it.

Are most people using merges or base wan with loras? What merges are "best" generally?

Currently using the Enhanced NSFW merge

Saw Remix 2.0 and 2.1 which seem good

Dasiwa which seemed like anime focused

smoothmix (did not look that good to me).

I am aware that base generally gives better results, fp8_scaled is what i run for base while i have heard people say q8 is "better looking", but loading several loras on Q models cause slowdowns afaik, something like every additional lora slows it down a bit while fp8 does not suffer from that. Therefore thinking that possibly a merge would work better.

FP8 is a native format. It just reduces the size of the floating point number (same as using a float vs a double in code).

Q8 is a compression format that converts the weights into an 8 integer representation. The big benefit with this kind of quantization is that it is very widely supported and can run on hardware that does not support FP8. It also allows for much more compression all the way down to Q2 (but with worse results as you would expect).

Generally if you have the hardware to fun FP8 (or any other FP format) that is going to work better, and have fewer issues.

How much the compression format impacts lora function will vary.

As to merges, that's a totally different thing. A merge is where you take the weights from two or more sources, and combine them into a single model. This can be useful to get a model that has some combination of their concepts and knowledge when done well. But it will often mean that the result will not work as well with Lora made on the original models, as the weights are now different than the Lora expects.

If you want some 121 help drop a TG or Ses and I'm happy to guide

>>20391489
Q8 is compressed on fp16 base model. To my eyes the quality difference is very minimal....loading times, I dunno if it makes a difference using Q or base model...loading loras always eat more time. If they are merged in your model - > model gets bigger - > takes longer to load. I don't generally like merged models as loras in them are harder to control. And loras get updated..... Rather download 200mb new Lora than 20gb version of the merge

>>20387902
Is this ltx2?

Do they steps apply to linux as well?

>>20392037
yes...2.3 version

>>20392096
no...basicly commands on installr are the same, but some stuff like attention wheels are installed assuming you are on win machine.

try here: https://comfyui-wiki.com/en/install/install-comfyui/install-comfyui-on-linux

>>20384340
>>20380169
please how do I do this with a human? ( ai human created)
what lora?

>>20393305
? Same lora works. Just leave the anime part out of the prompt

File: 157574640047854464_00002.mp4 (885 KB, 400x720)

885 KB MP4

IS it worth it to run these gens at higher than 640 'longest output' ? takes much longer but is the quality difference that noticeable?
example 1 @ 640p

File: 157864825629037517_00001.mp4 (1.11 MB, 480x848)

1.11 MB MP4

>>20395048
this is at 848

>>20395048
>>20395054

why does your look so cartoony?

File: 1571015114208788410_00001.mp4 (785 KB, 720x400)

785 KB MP4

>>20395076
im not sure its my first time putting her in a western scene
army scene looked decent i thought

>>20395048
worth nothing to me...but you'll be the judge of what you want to achieve and to who. Ofc higher res looks better. if you are making stuff for 4chan faggots, note the 4mb limit, no point to make top-shelf quality just to compress it down

>>20395199
is there any good deep anal penetration i2v wan2.2 loras that has given you good results? the ones Ive tried is some gentle thrusting, I am looking for a lora that can deliver a deep hard dicking. Usually I use an image with the dick already in there

>>20396074
Try dr34m's general NSFW lora

File: Pt1-ComfyUI_00551__x264_004.mp4 (3.66 MB, 832x1248)

3.66 MB MP4

>>20396378
>>20396074

Pair up dr34m with NSFWFastMove base model. First 10 seconds here are wan 2.2 base model, last 5 are FastMove. FastMove does lots of motion/fast motion at the cost of losing some detail because of all the motion.

>>20396582

There's a lot of options here, I use the NSFWFastMove V2 FP8 but lots of quantified models and whatnot as well.

https://civitai.com/models/2053259?modelVersionId=2477539

>>20396602

This lora also helps sometimes. Works best with missionary/cowgirl position but sometimes helps with motion for other positions and blowjobs.

https://civitai.com/models/2224461/male-and-his-living-cocksleeve-wan-22

im having an issue where after installing everything, i click the run_nividia_gpu,bat file and it shows everythings loading up, but then it just ends with "click any button to continue" and i do and then the windows prompt just closes and comfyui doesnt boot up on the internet browser.

>>20396665
same for me, couple of months ago it worked fine, but now no bueno, no help from reinstalls.

Hey Bag, I keep seeing "use SVI" for extended clips or multiple scenes but what is SVI/where do I get it? is it a workload? Sorry for the dumb question...

Also, how can i combine two images together (man and woman) to then create an i2v from there? is that possible w comfyUI?

>>20397912
Use the klein/qwen workflow. It is really good at simple swaps (Take the man from the first image and put him next to the woman in the second image)

>>20396665
>>20397740
don't quote me, but I think the custom installer is not installing or recognizing the right things for recognizing your graphics card, or the wrong one.

You could do your own install, it just takes time. Especially installing sage and reactor.

>>20397932
>>20397930
hot couples.

>>20397967
Thanks. I’ve been trying to get something done to them but looks like people aren’t noticing me right now. Understandable though I’m sure it happens to a lot of people. There’s only so many wizards haha

>>20397972

it's cause it's not a fucking request thread you goddamn faggot

File: imagine if I didn't just (...).jpg (465 KB, 2116x1024)

465 KB JPG

>>20397942
>>20397912

>>20397904
SVI is lora....and you need own workflows to run them

>>20397912
like anon said >>20397942 look up for flux klein models and workflows to make image (or in your case image compositions)

>>20396665
no info on console window where it hangs? Have you tried installing just basic comfyui+manager and see if its run then. Also what graphics card you have?

File: scammer.png (16 KB, 277x159)

16 KB PNG

hey all wiz. i report again another fake paid requester. this person never refused paid things, until he see, he can't scam me. i finally saved precious hours. free or not, be sure guys to get your justice first. especially, if you showed some proves of your work

>>20365692
>svi, you kinda need a bit of luck how the last segment will end (it's last frame will be next segment first one)
I thought the entire point of SVI was it remembered, somehow, what the original image looked like. Whats the point?

>>20398927
it remembers the latent of the first image (ak anchor image) and 5 last frames of the previous clips

lets say you have dick in the pic as your input, changes are good to make that dick look that in your last segment

up

>>20398386
When I get to the step of activating comfyui AND MANAGER as the basic version, it boots up fine. Then after I install the custom nodes and etc going forward, thats when it just does what I previously stated. and I have an RTX 5090

anyone know any good loras for sex where there is no man/dick in the initial pic? the sex fov one is the only one i have found tat doesn't create abominations/where the girl's face doesn't completely change

https://civarchive.com/models/1923528?modelVersionId=2177091

>>20401110
Just add the prompt "a naked man walks into frame with his veiny erection appropriately displayed" or something of that nature
If you're using the base model, i do recommend some sort of penis lora, if you're using a merge, any good merge should have that sorted out

File: 1-ComfyUI_00034__x264_002.mp4 (2.14 MB, 992x848)

2.14 MB MP4

>>20401110

Prompt it and use Penis Lora or you may get the baggette looking snausages. Sometimes even using it you still do depending on how big you go with it.

>>20401161

Oddly enough when using the FutaTF lora they come out perfect and ginormous.. guess its because.. futa

File: comfyuiask.png (794 KB, 1226x642)

794 KB PNG

First time generating. Been at the loading WanVAE portion at 0% for about 20 minutes. Does this part normally take a while? (new to AI and Python for the most part)

File: 1751759394442262.mp4 (3.95 MB, 648x1152)

3.95 MB MP4

has anyone found a way of avoiding major blurriness between samplers ? once i get to sampler 3 or 4 the image is a blurry mess. Even up scaling it doesn't really seem to help. SVI has the same problem from what i can tell. the example here is using painter long vid and i upscale to 3k between samplers but its still messy.

>>20401607
What card you have and what settings you are using, post screenshot of your workflow..... Seems pretty slow in general. Vae loading should be pretty quick as is quite small file

>>20400394
Install just comfy and manager, then custom nodes.... If it boots then the issue is with attentions

>>20401800

I think it's given that quality goes down after each extend. Also depends which loras are you using

>>20401800

I extend a lot of my gens. Few things
- start with highest resolution your card can handle.
- Base model, how many loras, lora strength, CFG all affect the quality and are compounded. So if you use 4 loras x 3 extensions, Same with CFG if you use CFG 1.4 x 3 extensions=1.4+1.4+1.4, etc. For base model best quality i have tested is smoothmix, no idea about SVI.
- Lastly the golden rule I heard is no more than 3 extensions but I've gotten away with up to 6 but again depends on how many loras and whatnot.

>>20403591
So there more loras that are used the worst the result? Ideally we should use as few loras as possible?

>>20403591

Also lighting and composition will affect extensions. Good /bright lighting is always best. If you are extending a dark gen it will likely turn out bad just because low light is hard to get/keep details.

>>20403595

Loras add motion/noise and/or distort things (breast expansion, etc). So less loras will produce less noise and lose less detail. Also some loras do not play well together and/or with some base models

File: WORSHIPPING THE MONSTER 0(...).mp4 (1.23 MB, 672x592)

1.23 MB MP4

any ideas how to gather a specific prompt from a video for better results?

ive spent money on motionmuse and im trying to learn local so i dont have to.
any help would be greatly appreciated figuring out how to get the prompts right for some of these vids. i am using sensual bj lora, along with blink blowjob and a light lora. but i cant get the same result.

so, any ideas how to gather a specific prompt from a video for better results?

attached: motion muse version
next post : my version

>>20403758
Sensual bj seems right choice, could be the lightx is limiting the movement quite a bit.....prompt something like "......video jumpcuts to....." (it's not only blink thing)

>>20404749
To get some motion back when lightx in use, use painter or svi wan2motion nodes

>>20404773
i still do not know how to identify a "lightx" lora vs something link blink bj, oral insertion etc

>>20402335
So I removed everything and started fresh again. Did step one of installing comfyui and manager. Booted it up, and it worked. Clicked "skip for now" when prompt to install custom nodes. Went back to your 1stAldBag_install and then clicked on option two for installing the custom nodes. Let it finish. Then closed it, and then attempted to boot up comfyui with the nvidia bat file, it loaded through the prompt, then just sat idle at "press any button to continue" then I clicked enter and the windows prompt window just closed and never booted up comfyui on my web browser.

>>20406014

Did you update your windows and drivers first?

The Windows portable build currently comes with Python 3.13 and PyTorch CUDA 13.0. Update your Nvidia drivers if it doesn’t start.

Try using a different install if still not working:
https://docs.comfy.org/installation/comfyui_portable_windows

Lastly it seems lots of people are reporting issues with latest version of ComfyPortable itself maybe find an older install version and DO NOT update:
https://www.reddit.com/r/comfyui/comments/1s095z3/latest_versions_of_comfy_add_more_breaking_bugs/

>>20406317

Also try running with a edge if using firefox or other browsers.

>>20387902
LMAO, thanks man that was fucking awesome

>>20387902
kek

File: 214921_157573958331029965(...).mp4 (1.78 MB, 512x640)

1.78 MB MP4

what parameters must i change in the SVI 2 workflow to make it more smoother and faster looking? it looks kind of slow-mo.

>>20406624
what parameters you have now.....
also >>20387902

there is setting called motion_amplitude on the svi node...also if your interpolation is too high contra the fps you are using, that is slow mo effect as well

>>20406317
Checked to see if windows had any available downloads. It said it was up to date. Checked nvidia app and reinstalled the latest studio drivers for my 5090. Tried the installer again and had it install comfyui and manager, booted up fine on my firefox browser. Closed it and then told the bat file to install the custom nodes. They finished, closed it and then booted up the nividia bat file again to get comfyui running. Loaded through the prompt, then sat idle again at 'push any button to continue" once it loaded through everything. Didnt boot up comfyui on the browser, then I pressed enter and the windows prompt closed. Guess I'll just download the older version and see how that goes.

>>20408198
installed comfyui and manager with the older file. booted up fine on my firefox browser. then used 1aids bat file to install the custom nodes again, and then it didnt boot up. guess ill try to install the custom nodes from directly in comfyui after re-doing step 1 again. see if it works that way instead.

>>20408273

This is why I use my own workflows and avoid other people's custom tricked out stuff. It may work for them just fine, or work fine when they put it out...but you never know what tweaks it does in Comfy.. and Comfy is always auto-updating and changing and sometimes it don't like all that tricked out "bling" running.

When I installed mine it was when people were just trying to figure out how to get Comfy to work on 5090s and you had to use a very specific Pytorch or it would throw hella Cuda errrors. Sooo many dependencies to get Comfy running smoothly

>>20408333

I was doing some gen requests this weekend and used a 6 month old workflow with older nodes/models and it completely locked up my Comfy.. and I keep my system offline only update it once or twice a year..

>>20408273

If Comfy works fine without the custom nodes/auto-install stuff.. then its probably that causing the issue.

seems like comfyui now uses torch 2.10....that might cause issues, i do a fresh install and look into it

>>20408344
the everything everywhere node that was in a lot of my workflows got fucked and caused all my workflows to die
there is not real fix that I can get working
just had to manually relink everything

>>20408739
i think they are pushing their nodes 2.0 bit too hard...

>>20408198
what does the console window say before "press any key to continue"

also did you remember to close all the previous comfyui console windows before launching new one?

>>20358908
what is the difference between Q8 and Q8 wan2.2 remix? should I install them both or just one of them?

File: 111.jpg (781 KB, 2518x1376)

781 KB JPG

>>20408707
>>20408934

>>20409247
you have nvidia t400 4gb card?.....you ain't going to generate much with that....

you could try and and delete the folder:
XXX\ComfyUI\custom_nodes\ComfyUI-SeedVR2_VideoUpscaler
then run it again.....

but like said....even if you got it running, you ain't doing much with it, maybe some image stuff

>>20409203
just one....start with plain Q8, remix has some loras baked it and claims to be better on some things (dunno)

>>20409247

NVIDIA T400 4GB ram. Yup thats your prob

Dude said he has a 5090 but Comfy says...Nut-Uhhhh

>>20409425
That's a secondary GPU for other purposes. My primary GPU is a 5090

File: 111.jpg (126 KB, 1501x720)

126 KB JPG

>>20409676
As I said, I do have a RTX 5090. 3 GPU's I guess technically.

Full system specs

CPU - Ryzen 9 9950x3D 16-Core/32-Thread @5.7ghz

RAM - 64GB of DDR5 @6400mhz

Then the 3 GPU's, a radeon onboard motherboard GPU.

My primary which is the 5090

and a secondary which is the Nvidia T400 4GB

Reason why I got it is because Nvidia discontinued the 32-bit physx support after the 4000 RTX series cards. I'm a gamer and roughly 200+ games used 32-bit physx from 2008-2011.

So whenever I play any older games that has it, I use the nvidia t400 to run the physx support while the 5090 does all the primary stuff or for any modern games.

>>20410279
oh and one of those new fancy AI mobos

MSI X870E Gaming Plus Mobo.

File: PT 1.jpg (627 KB, 2398x1379)

627 KB JPG

>>20409434
tried to reboot again after a fresh install all over. Here's a full view of the prompt window.

PT 1

File: PT 2.jpg (714 KB, 2542x1321)

714 KB JPG

>>20409434
PT 2

>>20410321

Prompt says there is a Windows stack overflow issue, maybe try addressing that. That said, if you got Comfy to run and its just the nodes just install the stuff manually from Comfy instead of trying to 1-click it with the bat file.

>>20410669
how would i begin with "addressing that"?

>>20410669

There is also a specific node you need installed to run multi-GPU, make sure you have that enabled first.

To enable multi-GPU support in ComfyUI, install the ComfyUI-NetDist extension, which allows running nodes across multiple local or networked GPUs. It is installed via the ComfyUI Manager by searching for "distributed" or cloning the repository into custom_nodes

>>20410676

Dude, ChatGPT or google that shit ;)

>>20410679

It never ceases to amaze me that people come immediately to 4Chan with their technical issues. I wouldn't ask anything here until I checked Youtube, Reddit, Github, ChatGPT and google first.

Odds are you are not the first one with this issue and somebody else already experienced the same problem, figured it out, and posted a tutorial/guide on it.

>>20410699
Sorry. I'm just confused is all. This used to work just fine a 4 months ago with me having these two gpu's. Then last month I did fresh OS install. So when I tried resetting up his workflow and etc this time, I was confused as to what's changed to not make it boot up this time.

>>20410710
Comfyui is famous for updating and breaking.
Ad another anon said, he just doesn't update his.

I leapfrog when I meed to update. I install a second instance of Comfyui Portable and ensure it is functioning before I abandon my old instance, because program updatez or node updates can effectively break old workflows on new installs.

You either have to install an old version of comfy, roll back your nodes, or find updated versions of your nodes.

Google how to install Comfy Manager, so you can use it to install individual nodes.

Easy mode is todrag and drop your workflow into comfy and use the manager to install missing nodes.

But again, you will have to look in the manager or terminal for node errors or conflicts and troubleshokt as necessary.

>>20410748
this......if it works, don't update it (thats why i removed all the update batch files)

if the install + manager works, then do just that. Install the missing nodes via manager as you go and open new workflows.

one thing you could try is to edit launch.bat add line:
set CUDA_VISIBLE_DEVICES=0
before the actual launch line....this forces comfyui to use only one gpu (id 0 in this case)

>>20410748

To add to this - you can place all your model files in a single place (either inside your primary ComfyUI or anywhere so long as it's the whole models folder with the same subfolder structure) and then create a symbolic link to share that with any number of instances of ComfyUI.

Saves you having to copy and shift models around all the time.

I do much the same as the above poster and have at least two instances. My current "good" one and then one to mess with if I want to do something that could break the install.

How is ComfyUI for AMD GPUs now? I have a RX 6650XT and R9 5900X for work. Also does anyone have a good json workflow they could upload?

>>20358908
Whats the difference between running run_nvidia_gpu_sageattention and the other fp16 and fast fp16?
Which is best for image and which is best for video?

>>20411363
https://docs.comfy.org/installation/comfyui_portable_windows (experimental AMD)
try this....note that workflows don't care what OS or what GPU you have. they work if you hace the gear

>>20411513
sage is the fastest attentions atm...no matter what you make. you can make images with wan 2.2 but i would use z-image or flux klein that purpose

>>20406716

it's all default man

>>20412189
...as? in what workflow? win+shift+ s

humpy bumpy

>>20358908
With Grok and other free sites all gone now for NSFW gens, this seems to be now the only option.

Was avoiding this because I heard it "destroys" your PC?

Also, is there a simple quick install that has all the connections made automatically and you just run it? Last time I attempted this there was so much fine tuning I just gave up...don't know why we can't just use a standard default workflow that generates acceptable NSFW content, maybe there is, please educate me.

>>20413628
What is default workflow? Workflows has nothing to do with if it makes NSFW or not. Those come from models and loras.

If you mean templates that come with comfyui, feel free to use them if you wish. They are also ready to go, just reselect all the important files

>>20413672
What I mean is is there a single download function which once downloaded, I just open and can insert say a photo, add a prompt and boom, NSFW content as opposed to having to figure out which connections work together and troubleshoot until I get a result that isn't pixelated noise.

If what im seeking exists, fantastic, just need to know which one and ill try but it bring me back to the other issue
>does this "destroy" my PC over time?

>>20413814
>once downloaded, I just open and can insert say a photo, add a prompt and boom, NSFW content
forge neo comes closest to something like this and can also work with newer models like flux, z-image, etc.

>>20413920
where would one find the simplest link to download this in its entirety?

>does this "destroy" my PC over time?

Same way using your pc to play games does....sure it pushes your gpu to its limits for the time you are generating something. I bet ppl who know nothing about how ai/computers in general work...would use word "destroy"

>>20414774

Guessing he meant possible program viruses and/or worried about the CUDNN, Python, and all the other dependencies.

Millions of genners still going strong so...Cyberdyne be damned !

>>20361258
I'm getting 10-15 seconds of 720p video on a 12GB 3060 (non TI) and 16GB ddr3 (yes, ddr3, i'm a dinosaur) using a GGUF LTX2 workflow, it allegedly works with 8GB vram.
Worflow is in this vid, links to the required files are in the workflow.
https://files.catbox.moe/biyyl3.mp4

Lowering the resolution tends to increase my OOM errors, go figure

I keep all my loras, checkpoints etc in a permanent folder, every time I update to a new comfy portable I just drop a few symbolic link into the new install. theres a program called link shell extension that adds the function to the windows explorer context menu.

I use stability matrix to handle my comfyui installs, it also handles the checkpoints and loras between all of my installs in 1 spot so i dont have to move files around.

>>20358908
If I already have ComfyUI downloaded, is there an easy workflow I can just import that works right away? If so, can you link it?

>>20415730
If you have all the needed models and nodes..... Then yes there is plenty of those. Civitai is good place to seek those out. Of course you need to know how to write a prompt.

Simple and comfyui hardly never go in same sentence.

>>20416074
Also hard to give you any direct links since you have to stated what you wanna make.... NSFW as in images, video, long video, video with audio, faceswapping to existing video......

>>20416074
>>20416078
NSFW images/videos from an image provided. I suppose the challenge is knowing which models and nodes I need and where they should connect, this has always been a struggle for me and always results in slop results.

>>20416085
if you need premade workflow you very rarely need to connect anything. wan 2.2 is still best option for videos, for images; z-image or or flux klein are popular atm.

you will see the models and vae/clip files needed when you open the workflow. then seek them out from the net and put them in right directories. or use OP's installer that does those for you.

>>20416085

If you need some help I'm around to jump on a TG or ses chat and walk you through the basics. It's not as bad as it seems. just feels confusing when you are new.

If you want drop your id and I'll msg u.

Shouldn't there be an exe in the root ComfyUI folder to run it? I don't see one

>>20416801

Its the one that says "Im BATman" and its not wearing hockey pants.

File: 157968640734529274_00001.mp4 (898 KB, 576x576)

898 KB MP4

I saw that your workflow has first frame last frame capability and turned it on, it does loop if I use the same image for both inputs but it blurs and overexposes at the end. How do I make it not do that? So that the video loops without transition effects. Thank you for the workflow and comfy setup wizard Mr.bag.

>>20416930
to be honest, i've never used last frames for that (looping) purposes. My suspicion is that lightx loras are cause that....gonna do some test

File: 89vvt56765.png (879 KB, 2315x1147)

879 KB PNG

>>20416930
>>20417083
well.....made a simple loop workflow from scratch, and seems like lightx loras not the culprits.....so that leaves either FLFV node or sampler itself

at least there is no white fades or overburn last frames now

File: loop__00010.mp4 (3.6 MB, 512x768)

3.6 MB MP4

>>20417353

>>20358908
new thread?