How would I replace this garbage with some simple stairs?Feel free to roast this monstrosity as I have no idea what the builder was thinking.
Also it's 42-43 inches from the floor and I measured some stringers at home depot but they only go to about 32 inches. So I don't know how to proceedThis genuinely looks unsafe
They make 10 step stringers
>>2992243I just want it all torn down, can I do like 4 or 5 steps that go to the door?
>>2992244I mean, it's gonna be steep af but sure.
just gotta cut stringers and put some steps on, add a guard rail and risers if you wanna be up to codestandard step height is like 7 inches, tread depth is 10 inches, you're probably looking at like 5 stepsits all just right triangle mathit's gonna be awkward though without a landing.
>>2992237you can put a vertical ladder there if you don't mind climbing down 4-5 steps
Cut your own stringers.Use any of the thirty online stair calculators to get measurements.Buy a few 2x12s and get cutting.
>>2992237I couldn't imagine going from being a ramp chad to a stairlet. Bleak.
>>2992237google the stair calculator. fill in height, thickness of steps and whether you want riser boards on the back of the steps buy a framing square, use the measurements it gives you to use. subtract thickness of step from bottom of first step; subtract riser board from top step.make one stringer- copy that one to make the other two.watch several videos on how to make stairs and a landing first, then go back as you are making them and get stuck.
