[a / b / c / d / e / f / g / gif / h / hr / k / m / o / p / s / t / u / v / vg / vm / vmg / vr / vrpg / vst / w / wg] [i / ic] [r9k / s4s / vip] [cm / hm / lgbt / y] [3 / aco / adv / an / bant / biz / cgl / ck / co / diy / fa / fit / gd / hc / his / int / jp / lit / mlp / mu / n / news / out / po / pol / pw / qst / sci / soc / sp / tg / toy / trv / tv / vp / vt / wsg / wsr / x / xs] [Settings] [Search] [Mobile] [Home]
Board
▼ Settings Mobile Home
/diy/ - Do It Yourself

Name
Options
Comment
Verification
4chan Pass users can bypass this verification. [Learn More] [Login]
File
  • Please read the Rules and FAQ before posting.

08/21/20New boards added: /vrpg/, /vmg/, /vst/ and /vm/
05/04/17New trial board added: /bant/ - International/Random
10/04/16New board for 4chan Pass users: /vip/ - Very Important Posts
[Hide] [Show All]


[Advertise on 4chan]


File: IMG_20261019_133849482.jpg (2.6 MB, 4000x3000)
2.6 MB JPG
Can this be repaired with epoxy?
>>
do you want to glue the broken off piece back on or are you just traying to slather enough epoxy on there to cover the hole?
>>
>>3012011
The first one, btw it's a low pressure system if that important
>>
>>3012010
a) how did that even happen?
b) how hot does it get?

If it’s just for cosmetic purposes, epoxy would work… you can get the stuff with steel in it.
I doubt it would be functional very long unless you encased it with a *lot* of high-temp epoxy (like build a big block around it), and prepped a lot of surface area for it.
Don’t forget to add lots of fiberglass for extra strength under heat (and use high-heat epoxy)
>>
>>3012010
braze it lmao fucking epoxy will not work.
>>
>>3012016
This. Brazing would be ideal.
>>
>>3012016
>>3012054
anon lives in a shithole kommiebloc (notice the sanitarium puke green walls) he definitely doesnt have an oxy acetylene torch to braze shit up
and it shouldnt even be his problem
and theres usually a pile of spares in a closet somewhere
or just pull the tie bolt and knock the busted section out
>>
>>3012054
> braze
That is just as bad as trying to use paste glue.
What you need to do is take the thing out, and make an outer mold and an inner mold using casting sand using the radiator as a model.
Then melt down some iron and pour it into the mold. After it’s cooled, put it in your CNC and machine the pipe ends and anything else that needs to be within tolerance. Easy. 20 minute job.
>>
>>3012010
stuff the holes with imitation crab meat, 2 birds 1 stone
>>
You could take it out and sandblast it to see if any other areas are about to fail.
>>
If epoxy fails, try ramen
>>
Pull it out and replace it with a share or something from the scrapeyard
>>
File: gorilla-glue-harispray.jpg (103 KB, 1684x947)
103 KB JPG
>>3012010
some gorilla glue oughta do it
>>
>>3012010
THERMITE
>>
File: 45635476543654654.jpg (43 KB, 574x930)
43 KB JPG
these are screwed together
soak in muriatic acid for a day, tear it down and remove the broken section
>>
>>3012060
I know this is complete bait and you're just being a disingenuous asshole, but brazing is quite easy and a preferred fix for cast iron.
>>
>>3012068
Kek
>>
>>3012010
i would try and epoxy it but after taking a wire wheel dremel and getting any flaking off and then a rust converter. if you wanted you could get a stainless steel hose clamp and put it around to hold it down.
>>
>>3012010
You can take it apart and remove that section. A lot of dirty work but you'll have a slightly smaller radiator.
Lots of videos out there.
>>
Not OP, but to everyone saying to just remove the busted section I have to wonder what seals the sections together. Is it 50 year old commie-grade rubber? I'd be worried that any attempt to open that thing up will result in tons of leaks unless OP is prepared to completely clean and rebuild it.
>>
>>3012010
It's cast iron, so no. The epoxy won't hold. You can't even weld it. Only option is to replace the radiator,
>>
>>3012010
It could be braised if you have the broken piece and it's whole, but otherwise no, you need a new rad.
>>
>>3012107
This. It's cast iron steam rads there's a set bolt that goes through all of them. That that out then pull the sections apart and just remove that one section. Replace it or re ripe the outlet to the floor opening
>>
Find another similar radiator from someone renovating their apartment and replace it.

I don't think the sections will come apart easily after some decades of being stuck together with rusty water, I would try cleaning and scraping the inner part near the break, then stuff some filler material to hold epoxy in place and then cover with epoxy
>>
B E L Z O N A
>>
>>3014478
>with rusty water
thats the neat part, the water is oxigen free and saturated, cast iron parts dont corrode in that environment
>>
>>3012058
A bunch of spare radiators in a closet? lol
They're probably more rusted than that one if so.
>>
>>3012010
Just look for one at your local scrapyard or fix your life maybe?



[Advertise on 4chan]

Delete Post: [File Only] Style:
[Disable Mobile View / Use Desktop Site]

[Enable Mobile View / Use Mobile Site]

All trademarks and copyrights on this page are owned by their respective parties. Images uploaded are the responsibility of the Poster. Comments are owned by the Poster.