Does anyone know if the wood framing for a vent pipe support looks ok ? I think the pipe weighs 30-50lbs
>>3015102
thats bombproof in comparison to most residential shitalso >>>/sqtddtot/
>>3015105Thanks man. I was trying to get a plumber involved and he said it wasn't possible due to the incoming pipe and I sent him this. I can't tell if he's serious, but has anyone been hired by a contractor like this ?
>>3015106>but has anyone been hired by a contractor like this ?certainly been offeredcompany sent me to a remodel at an address once, but wrong address and I ended up working at a different house on the same street also doing a remodelafter a couple hours, another plumbing shows up (the actually contracted one)>i'm apologetic"no biggy, looks good. if you ever need a job give me a call">>3015105yeah
>>3015103Don’t you want the riser clamp below that slip joint made with worm gear clamps?
>>3015128not OP but the clamp is to keep the multi hundred pound cast iron vent from falling while you work, once the pipes are connected it isn't as importantthose shielded ferncos are crazy strong too
>>3015190I think that’s why I’m wondering about this case as the PVC is hanging but supported by pipe straps from joists once transitioned into the drain. Before this was a cast iron drain and it was resting / supporting itself from the wood sill below. There was a leak in the drain and cast iron vent would need to be supported or removed. Everything I could find about AAV’s said not to use them if possible.
>>3015200it's pretty common practice to keep the old vent, they're the least corroded part and it's tedious to install new pipe up the vertical without everything open or the bootideally you would, but nobody does; because nobody wants to pay for itagain, I'm not OP, i just do this shit everyday>horizontal pvc generally supported by studs, if you're using straps it's to bend old shit into place against bad installi don't see straps on the pvc in these pictures>Before this was a cast iron drain and it was resting / supporting itself from the wood sill beloweh 99% of time they're supporting themselves on a 90 in dirt which is why majority of time if I camera cast vent it's back pitched where the 90 sits to the next fixture>AAV’s said not to use them if possible.AAVs are a great tool for remodeling, the problem is new builders using them instead of proper venting and they're rated way too aggressively compared to what they can actually do. you want to add a trap arm on a sink and throw a AAV on it? that'll work fine and replace the $20 part in 10 years without fucking with new vents and room penetrationsnew build trying to vent an entire bathroom group on an AAV under the vanity because concrete guys keep braking the vent stub ups?that toilet is never gonna flush well and will always get blockages
>>3015102>PVC solid core for a vent pipebrother why aren't you using sch40 gray?
>>3015202Here's a photo of the underside.
>>3015208oh fuckin nice basement access>jealous florida crieswood sill below now makes sense, but your clamp should do just as goodwell you did a better than standard job so feel good
>>3015210Haha thanks man, I really appreciate your help. I think if I can get away with this setup I’d keep it over an AAV because there’s existing cutouts to the vent pipe and all I needed to do is “stabilize” for use.
>>3015212roof penetrations are ass, so if you already have one it's a pain to seal it to replace an existing ventif you don't have a vent you just AAV becvause making roof penetrations suck
>>3015202AAV are for great if you do an add on basement bathroom to sent your sink but in general the more venting you have the better