File: 1674316316003846 (2).jpg (3.88 MB, 5520x6208)

3.88 MB JPG

PasteBin -
https://rentry."co/brg_V09
Remove The "

(very out of date. Send help)

File: workbench2.jpg (485 KB, 2976x2976)

485 KB JPG

Good evening /brg/ I have some news about my Cetme.I got my flat and barrel so It's time for a press. Tried using a 3D printed cetme jig to bend it without a press and it started breaking due to the infill being not enough. will print a new one or make myself a new one from unistrut if someone is willing to link to a forum post or blog on how to fashion one from said material.

Man, I really need to start lifting again.

File: dda1035f7fa052fd296ec7066(...).jpg (153 KB, 704x960)

153 KB JPG

>>65148166
>>65148252
EAT CLEN
TREN HARD
ANAVAR GIVE UP

Does DSA produce steel FAL mags in batches? I seem to recall FAL Guy on youtube claiming that DSA was going to be more consistent with manufacturing them. Why are surplus FAL mags so rare compared to G3 mags anyway?

File: Starting strength.jpg (106 KB, 624x767)

106 KB JPG

>>65148166

File: 1778051263808.jpg (223 KB, 2048x1153)

223 KB JPG

Reposting from last thread, I finally got a battle rifle. Next step is sling, mags, and ammo; will hold off on optics for now.

File: IMG_5259.png (829 KB, 1280x720)

829 KB PNG

>someone bought the last SA58 OSW from DSA’s website before I got off work
FML my birthday is on the 27th and I’ll probably have to wait months for them to build more of those. I really want the quadrail and not the new mlok faggotry.

File: G28WIP.jpg (511 KB, 3333x1202)

511 KB JPG

MR762A4 to G28 progress

File: dhg864ed6gh84er69g84er6g84eg6.jpg (2.64 MB, 2551x2070)

2.64 MB JPG

>>65148649
Looking good.

>>65149305
How accurate is that lmt?

File: fdrgedf54g1d365fg1edrgf53(...).jpg (1.48 MB, 2287x1448)

1.48 MB JPG

>>65149490
Extremely with the 20" 5R cut barrel. I typically feed it commercial 175gr SMK loads (FGMM) and it can extract everything that cartridge and I are capable of. I would suspect 1/2 MOA or better with precise hand loads and a top shelf shooter from what I've experienced.

Any ideas on my muzzle device issue from the last thread?

So far:
>Determined it isn't pinned.
>Let it soak in hot water for over an hour and managed to get it to loosen one quarter turn.
>Heat gun that could go up to 1200 degrees Fahrenheit had no effect, meaning it's probably not Loctite.

My guess is that this guy used a hideous amount of Rocksett or it's cross-threaded. I am going to use a sacrificial pot and boil the barrel for four or five hours next week. If it still won't budge, I am going to guess I have to take it to a gunsmith or just cut my losses and find a replacement barrel since it'd probably work out to being similar in terms of cost as the gunsmiths down here are all fudds that charge a hilarious amount per hour on top of being slow as molasses.

>>65149929
Soak in hot CLP

>>65149929
if its not cross threaded you could always soak it in a solvent. Might have to let it sit for a few days. Will be a pain in the ass to rig though.

>>65149936
Best way to do that without giving me super cancer?

File: IMG_9134.jpg (3.29 MB, 4032x3024)

3.29 MB JPG

>>65149499
>1/2 MOA or better
Nice, I use 175 fgm too. I have gotten groups like that but I can't do it consistently. Pic rel was 200 yards. I think I might need to get one of those stocks or get creative and rig a cheek rest together. How is the gas on that rifle?

>>65150031
Not indoors. Do a propane stove outside with a water bath.

File: asdgf564aw6g8a4s6gf8as4dg(...).jpg (1.39 MB, 1800x2026)

1.39 MB JPG

>>65150491
Like most of LMT's monolithic rifles, violently gassed. Reliable as all get out, but definitely not tuned for pleasure.

>>65150666
How heavy is your buffer? I'm using a standard a2 I think. What about your charging handle do you get a lot of gas from that? I was looking at the lmt one originally but at the last second I went against my gut.

>>65148239

I've never heard of anyone bending a G3 flat without a shop press.

>>65148269
Am back, went to gym and lifted yesterday, everything hurts.

>>65148382

Congratulations.

I'm seeing this and thinking back on what changes I made to mine.

A trigger job or trigger replacement will help with hitting stuff further away.

An extended charging handle is nice to have.

Don't try to use the sling ring up front if you're putting a lot of tension in your sling to help you stabilize for a shot; the ring is attached to the triple front sight frame and the barrel. So when you put pressure on that ring, you're pulling your barrel slightly off target.

Learn the system; how to check bolt gap with feeler gauges, and how to take the bolt group apart and put it back together with the rollers unlocked so that it fits back in the rifle. There is a trick to doing it.