File: 123.webm (2.68 MB, 720x1280)

2.68 MB WEBM

G36 22LR shooting footage by Duality Arms Co

Belt fed 9mm AR9 with FRT

https://youtu.be/wtKJ21S2LY8?t=25

going to be honest here, I think ASDesgins should give up on their B&T offerings, the drop in triggers are cheaper and less manipulation is needed.

They should probably give up on the kuna as well

>>65367016
Where do I get the SKS frt?

>>65368739
texas triggers

I want to buy either a MR556 upper or Colt IAR pretty much entirely to run it with an FRT. Which option would be better? I'm thinking on the 11" versions of each so I can put my suppressor on without turning it into a musket. I'm leaning towards MR556 because the 416 has a longer history of hard use while the IAR only has some limited service in like Singapore or something, although I know it is perfectly fine based on posts/videos I've seen of it.
IAR is still attractive to me visually and because of the heat sink system. Plus it being heavy as fuck would help with recoil mitigation.

COME ON PROGRESSIVE AUG PACK I NEEEEEDDDD YOIIIIUUUUUUU

>>65368771
I know this is coming out, I just wish there was footage of it working

>>65367016
>>65368744
>norinco only
fuck.
Are SKS variants really that different?

>>65368793
>Are SKS variants really that different?
I have 5 and only 2 are technically the same.

>>65368768
IAR runs cooler I think

>>65368771
No more than I need the Uzi Model A.

>>65368909
I've been told that DI guns push their gasses back into the receiver while piston guns generally keep it in the barrel portion. Or is that from the heatsink?

>>65368793
The chink sks is reverse engineered from the Tula ones, just like the yugo sks. So the geometry is off across the board there.

I think i will finally buy an ARC. Did they ever say if the new screwless one had any other changes besides cosmetic?

>>65370344
no, pretty much just cosmetic

>>65370454
when are you going to move away from florida?

File: 1752250295899772.jpg (93 KB, 1024x1004)

93 KB JPG

>>65370454

>>65370454
>go to weapons board
>seethe at weapons being used
Have you considered rope?

>he deleted his post
lol.

>>65368744
>>65368793
Lame, the one I have access to is Russian

>>65371813
They are working on a solution for other variants

Muffin tactical has pages for Ruger MK IV 22/45 and Bren 2 FRTs confirming development

https://muffintoptactical.com/ruger-mk-iv-2245-assisted-reset.html

https://muffintoptactical.com/cz-bren-2-ms-assisted-reset.html

>>65367016
Fartsausage general

File: 123_compressed.webm (1.95 MB, 360x640)

1.95 MB WEBM

Footage of the screwless ARC

looks like kalash kits are being set out this week

once someone confirm that they have it, I'll update the github with the information

I am coping that one day FRTs will get the NFA repealed so that I can legally drill a 3rd hole for free instead of having to pay 200+ for a good FRT. I still like FRTs though. Hope they go down in price

Bump

I'm not buying one, but I noticed that rare greed has a specific trigger for the MR556/416. What's the difference from a standard AR FRT? Guessing the lower has some unique dimensions slightly off?

>>65376981
MR556 has a firing pin block

File: Kicker-Product-A-scaled-4(...).jpg (382 KB, 2560x1440)

382 KB JPG

I have good news for trigger kicker people.

while it is not supposed to work with piston driven AR's it does work with a T91 wolf upper.

why this piston driven AR but not others?

>>65377061
that's fantastic, which others are confirmed to not work?

Is this the black people general

>>65377074
well I only own the t91 (for piston driven AR's) so I have not tried others but the website and Hoffman himself that piston AR's dont work.


sooooo I dont know all my friends bout T91 uppers when they were on sale couple years back. I cant think of any of them having other piston AR's

>>65375014
Simply make illegal machines guns and claim it's got an FRT

>>65377109
based but also duh.

>>65377109
Can't hide the hole though :(

>>65377079
yes
Sponsored by TexasNiggerUSA^(tm)

>>65377061
It also works with Adams Arms uppers.

>>65377109
>>65377118
>>65377175
I don't think people understand just how many illegal mgs are out there. There's a metric fuckton especially pre-FRT era. I live in a state with a lot of public land and there's brrrrrrrting going all the time and I guarantee 90+% of those people can't produce papers much less survive a search for engravings.

Nothings happening to them. It's a felony but if you're not going to committ another felony with it, you are not brown, or an idiot generally I think you're likely to be fine. Guys with illegal mgs are dying all the time and when their wives and families send them to morphys etc without papers is usually when Becky finds out her hubby had actually made more machine guns than David koresh.

Fuck government. The social contract is beyond broken, and they're still breaking it as Jamal kills 2yr olds by accident with switch only to get no jail time as you worry about holes in things like a pussy.

File: 123_compressed.webm (2.84 MB, 360x640)

2.84 MB WEBM

Another preview of Texas Trigger's P320 FRT

>>65377839
How is nevada treating you?

Anybody ever installed a Texas Trigger FRT into a ZPAP? I watched their install video and it was pretty lax on chopping up bits and pieces, curious to know how it's gone for others.

I don't know much about FRTs. Which mp5 FRT should I buy now for my future build?

>>65378118
While I don't own one, you should consider: https://pembletonandsons.com/products/pembie-5
It's drop in. Most other MP5 SS/FRT systems will have you buy an aftermarket lower

>>65378079
It's filled with David Koreshes. Every fucker in this state has a machinegun.

>>65377977
very interesting things i noticed with their videos
>Never show the parts
this tells me its going to be a race to the bottom as soon as its released.
>all the triggers are the flat faced triggers
with the triggers being flat it makes me think they bought them in bulk and modified them, maybe. so maybe no choice of other aftermarket triggers. we'll see.

>>65378336
Ita hella based as you stated.
BLM desert rat life is the best

>>65378381
probably, also likely works like other pistol FRTs that rely on tilting barrel which is pretty lame, the other P320 FRT that an anon in the threads make will be more reliable I would think

>>65378336
I'm jealous. Visited Nevada last year and went off roading. On the path we took there was a little shooting area set up with some guys there. Cant have shit here in NC

FRTs are not a replacement for full-auto triggers in real combat. The adrenaline and stress make you lean into the trigger really hard, which causes most FRTs to jam.

>>65378128
So it's just a leber that they made fit in a standard HK trigger housing? And they want $250 for it?
All the downsides of a leber but I guess it saves you $1.25 in filament to print a housing.
>>65378921
Real, correct, and trve. However full auto in your carbine isn't really useful to begin with so it's a wash.

>>65378975
>However full auto in your carbine isn't really useful to begin with
Yeah it is. You need it for suppressing fire in first contact situations and establishing dominance in CQB.

>>65379021
>suppressing fire in first contact
That's what belt feds are for.
>establishing dominance in CQB
I'm sure the people in the adjacent apartment will appreciate the 30rds of 5.56 flying through their living room.

>>65377061
>>65377074
My T91 12.5 works fine with an ARCv1 and hydraulic buffer. I'm patiently waiting for 4pos ARC and have already acquired a T91 marked AR lower

>>65378975
>>65379021
Being on the receiving end of rifle caliber machinegun fire by someone who knows what they're doing is hella scary. There's a reason they dont want people to have it. One it generates paralysis even in non-amateurs and two it will cause mass casualties among juicy area targets like big crowd very quickly. At close range it can absolutely allow someone who has it to break contact and get away or make the untrained think they're dealing with something more formidable and choke.

>>65379091
>Full auto mag dumps into crowds
Nah m8, the reason they don't want us to have full auto is because of people like you.

File: nervous-laughter.jpg (365 KB, 1080x699)

365 KB JPG

>>65377977
>P320 FRT

>>65379084
I'm referring mainly to the "trigger kicker " as it was advertised not to work with piston guns.

But the 12.5 is so cool looking, happy for you.

>>65368768
MR556 is probably the nicer, better designed option of the two. Regular Guy Training on jewtube has some really good videos on what makes it good. If you go with HK you get what you pay for, premium quality, bar none. If you go with the Brownells BRN-4, you at least get parts commonality with HK, as well as almost the exact same materials you'll find on any other well made rifle, thus being easier to replace.
Pistons will run cleaner in the long run, since it doesn't dump hot gas and carbon into the receiver like DI, especially when you put a can on it. That said, I think DI guns have more potential for greater accuracy by virtue of having less shit on the barrel. Both are very reliable when made well.

File: 123.webm (1.51 MB, 720x1280)

1.51 MB WEBM

Texas Trigger's P320 FRT in a Flux Raider

File: 123_compressed.webm (3.36 MB, 720x1280)

3.36 MB WEBM

screwless ARC shooting footage

File: 123.webm (634 KB, 1142x958)

634 KB WEBM

releasing late august

>>65379451
I saw his 2 BRN and 1 MR556 videos which really got me wanting them. The 21k round review for the BRN was pretty surprising. I wish he'd do a 21k for the HK but I'm sure that it exceed the BRN. I ended up buying the HK last night so I hope to take it shooting on Saturday

Still no news on a 365 FRT? Asked about this a thread or two ago and someone asked why. My thought process basically is:
1, why the fuck would someone make a 320 FRT
2, Flux chassis, which I assume is a large reason the 320 FRT is bring developed in the first place

>>65380904
ARC fire easily

>>65380987
There is not a 365 FRT in development from my knowledge. If you find someone that is working on one, please let me know and I'll update the github page

>>65379104
Everyone in FRT threads, including you, is in that category, m8.

>>65381021
not that guy but what do you mean by that?

>>65377061
In the psr vid with hoffman, it also worked with the sig 556, and another anon in a previous thread mentioned that the caracal 816 worked with it.

>>65381094
Everyone in this thread is obviously interested in full auto. Being interested in full auto is not unbalanced. It is based.

bump

File: cdn.storynavigation.jpg (119 KB, 938x1089)

119 KB JPG

PS90 FRT Overtravel limiter

This is pretty awesome, if configured correctly, the gun wouldnt lock up from trigger pressure

Have the people working on the 320 trigger mentioned any specific requirements for tuning? Spring weights or suppressor limitations and stuff.

Out of the loop here, but wasn't the ATF trying some different legal shenanigans to have FRT's considered a machine gun, or something covered by the NFA, again? Or is that old news?

>>65383844
Probably old news. There's a ton of new triggers coming out soon. The biggest is the rare greed ones. Doubt either party would do anything to interfere with the other

>>65383682
no

>>65377079
Niggers don't bother with frts or braces and other loophole shit they just slap a switch on a Glock and call it a day.

>>65380987
I also dont get this, everyone dogs on the 320 every chance they get and loves the 365. No idea how the 320 got development favoritism unless its purely on a cost per unit basis where you need to run the frt through multiple guns for cheap

>>65384669
FCU probably easier to work with

>>65380987
I forgot 3: it won't shoot you randomly
>>65384669
desu it might just be the numbers. There's how many millions of 320s out there? 365 is newer so else of them around. But I bet 365s are just as, if not more popular in recent years after all the NDs

File: __female_commander_and_si(...).jpg (190 KB, 850x1324)

190 KB JPG

>>65385138
Less of them*

>>65383458
This is pretty cool, good find anon. Hopefully it will work with the factory spring instead of just the K&M one.

since these have been on the market for a while now, has there been any reports of strange excessive wear or very premature parts failures? I'm not talking about barrel throat or gas tubes, I'm talking like extractors breaking, locking lugs shearing early not attributed to poor QC, trigger and hammer pins snapping, wierd things like that.

>>65385775
no

File: 123.webm (2.66 MB, 720x1280)

2.66 MB WEBM

looks like s3igu2 is back with the SCAR

>>65385775
Most people probably don't shoot enough even with a FRT to have issues I think. Hypothetically, I think hammers might have issues eventually

File: 123.webm (1.28 MB, 720x1280)

1.28 MB WEBM

>>65385810
looks like he skipped the idea of using a separate lower?

Anyone have more info on this
https://youtube.com/shorts/IhgzxL8drTY?si=0BFPAPDnRvsDl9wt

Called the "Keep it Kool Ambidextrous Safety Selector or KIKASS"

>>65386234
how interesting, never seen it before, thanks for posting. Whenever I find more information, I'll update the github page with it

>>65386329
>>65386234
this is it

https://samuraifirearms.com/kikass

>>65386333
>>65386329
>>65386234
>Designed to drop in in any AR lower, high or low shelf. No modification on trigger or lower

based off the description here, this is really appealing since the shelf doesnt matter and you dont need a SS cut, I'm curious of Geissele triggers or larue triggers work though

Kalash Trigger 3 position AK install video

https://youtu.be/NqJMNmbMCWU

>>65367016
I've been out of the loop for the entirety of the frt saga. Do they have DIY versions yet, or is everyone purchasing them?

>>65386775
check out the link in the OP, some are DIY depends on the platform

>>65386784
I see. Thank you

>>65386329
Add this guy too
https://m.youtube.com/@G2GTac
https://g2gtac.com/
https://g2gtac.com/product/splitfire-rs/

>>65386971
that's a crazy looking lever

>>65386978
>>65386971
lever is for semi auto bolt capability, pretty neato

One Horse Express releasing a AR22 with a atrius installed from factory

File: HOhErUBX0AAU6kT.jpg (153 KB, 1920x1080)

153 KB JPG

Fartsausage sisters, we're winning this battle. A year ago these things were hyper niche and early adopters were fearful of their legality. Now there are FRTs dropping every month for more platforms and they're getting better and more accessible. Mainstream vendors like Optics Planet even sell them now. They're ubiquitous across uncucked shooting ranges.

How many people do you think own these now? How many are out there in existence? This seems like the future for all rifles and PCCs, so long as momentum keeps going and more normoids keep adopting them.

The One Horse Express is the first gun to ship with forced reset functionality, but if things keep trending in our favor, we could see more manufacturers do so, including mainstream ones. Imagine a day when you could walk into any LGS and walk out with a factory three position Super Duty, SP5, etc.

>>65388618
>Imagine a day when you could walk into any LGS and walk out with a factory three position Super Duty, SP5, etc.
there are B&T guns with factory FRTs now, pretty cool

God please let the TP9 be good now

>>65388618
>How many people do you think own these now?
Not enough

>>65388618
I feel like a dope with my binary trigger because back in 2018 that was the the edgy thing to make your fun go brrrrrr

>>65388796
Binary? Pffft, get a loaf of unc!

>p320 frt
holy fucking based, I was gonna get a rare breed for my sp5k but maybe I'll just wait and see if this one will be cheaper for my p320 flux raider instead.

>>65390102
you'll have to wait a but, the current one that's out is printable but doesnt really work yet.

There is one made by an anon that occasionally patronize these threads and there is texas triggers version

I'm looking forward to the one made by the anon personally based off the details. There aren't any details really yet for the Texas Triggers version but if it relies on the tiling barrel like the glock, then it would be underwhelming

File: SVA44JOC3Yvene-main.jpg (108 KB, 873x1093)

108 KB JPG

Is there an FRT for the VZ61?

>>65390620
I heard a rumor that Mars Trigger was cooking one up

>>65390620
heard rumors of a FRT for it in the OEM lower, but what you can do today is 3d print a lower that uses AR FCG and you can use a super safety in it

>>65390642
>what you can do today
Bamboo wins again. I have to get me one.

>>65390654
yep, check it out

https://youtu.be/LSSSVJ2tWQ4

File: 123.webm (762 KB, 1612x848)

762 KB WEBM

Recession Ruger R345 running with the trigger kicker, point of concept by @PrintsandtheRev. Kinda similar for the 9mm version but without the kicker and the trip that fits into the rear sight

File: media_HOv5w_gWEAEKybj.jpg (711 KB, 2048x1536)

711 KB JPG

>>65390680

>>65390680
Hoodrats in love.

>>65367016
do they make them for the henry big boy

>>65390717
Anon, I...

>>65368768
MR556s don't have chrome lined barrels. They're not suitable for rapid fire.

>>65386775
The Super Safety is DIY, and some of the Glock FRTs are also DIY. I dunno about others.

Are there any sites that just don't care and ship to any state?
Asking for a friend
I'm not a cop. Proof: NIGGER!

>>65386775
you can DIY anything, quite a few guns simply borrow the super safety cam and lever setup with a different housing or receiver that can utilize the AR15 fcg parts. The ones that do not are the AK and some of the other more esoteric ones which haven't shown up yet like the FAL and PS90 as well as the handgun ones like the P320 which still isn't done.

The super safety is DIY and originally was designed to be printed but wear concerns lead it to be not exactly worth it to do so. There is a Send Cut Send version that uses laser cut parts as the wear surfaces which you can get cut out for a negligible amount of money and then do most of the finishing yourself. You still need to print out some parts and levers and the amount of cam movement is kind of funky but they will work. There is a Send cut send version of the Kabuto that is drop in for most AR15s with appropriate pockets but assembling and cleaning up is a process but thats also a negligible amount of money. The TX22 FRT is also send cut sendable and then you can clean it up with just a little bit of sanding and grinding but then you also need to potentially get new striker liners.

For you to get enough supplies to make like 20-30 of these its like under 50 bucks and then you just need to assemble them.

Most DIY work has slowed down though because the easiest and lowest hanging fruit has already been picked. For the cost though making them yourself costs almost nothing compared to what vendors charge. The TX22 in particular is almost not worth paying the 100 dollar price of admission for a 35 cent part. 10/22 frt is DIY but it needs a ton of work and other parts to work correctly.

DIY is not going to as drop in as a trigger kicker or a rare breed though, but its the own reward.

>>65388618
Optics planet has been selling them for a year.

There are probably close to 2 or 3 million individual FRTs out in the wild now. By the end of next year you will see another couple million out there. The speed of adoption is going to eventually slow down but guns coming installed with FRTs is definitely a big change. Evidently there is a market for the consumer to get a product that just works out of the box. Atrius is so crap as a product it will likely have all sorts of issues lol.

I wonder what's the next factory FRT option will be

>>65393104
Inshallah it will be ARC fires. Fuck Atrius

>>65393204
would be cool but harder to do because it requires the triggers to be cut. ARC fire is my favorite FRT but it does have a decent amount of requirements

>>65393216
low shelf (which is required by a lot of FRTs aside from AZ regulator and cassette FRTs) and the cut trigger. I think the cut trigger is the biggest blocker here

>>65393104
I anyone could get it to work with a 10/22 that would make my year

>>65393223
unless you meant just offering a factory option exclusively, there are FRTs for 10/22 already you can install.

>>65393226
yeah, but if I was offering factory rifles and wanted to sell one with a FRT, I would go with the option that doesnt require the trigger to be cut because there is nothing to do. You just install the trigger. Cutting the trigger and potentially fucking it up is just one additional step that I can see a lot of seller not wanting to deal with. Not saying it's difficult to do, it's just that it's an additional step needed.

File: Capture.jpg (133 KB, 1222x1215)

133 KB JPG

>>65393270
>Isn't low shelf the default for mil-spec lowers?

you'd be surprised. Colt, Smith and Wesson, Ruger some PSA lowers are high shelf. Colt in particular can be super nasty with a blocker.

My kalash triggers 3 position ak kit was shipped

File: 123.webm (2.61 MB, 720x1280)

2.61 MB WEBM

advanced reset tech releasing their version of the canik FRT

>>65392114
>Optics planet has been selling them for a year
Their headquarters and big warehouse is in Illinois, how has their state not buttfucked them for this? Or do they get around this by the gratuitious use of dropshipping?

Any arc fire updates for 308?

Has there been any stories or anecdotes of people out shooting getting accosted by the feds over an FRT?
Like asked to prove it's not a machine gun by some random ATF guy out and about.

>>65394233
Yes

>>65394266
Got any examples?

>have low shelf lower
>have M16 bolt
>have heavier buffer
Now I just pick my trigger and install, right?

>>65393902
not yet

>>65394378
yeah pretty much, the ARC fire comes with a cut trigger too or you can run a atrius without the need of a cut at all

Texas Triggers FRT P320 is officially out

>>65394401
Calling it the Reaper is crazy. I'm getting a Flux for my 320

>>65393291
Nice. What kind of AK are you putting it in and have to used the original AK frt to be able to give a comparison?

>>65394510
Just a WASR-10 and no, I have not used any AK frt before

>>65394457
I wish I knew how it worked though

>>65394299
No

>>65394233
there was a video of a black guy shooting a glock FRT and a normal cop came by to tell him that the range was closed or something and he inspected his guns. He was interested in the glock with a different back plate that didnt have a switch or FRT. The one with the FRT wasnt inspected at all. The cop left afterwards.

I would be really fucking pissed if anyone inspected my guns or any reason really

>>65394233
I think back when they were new, there were feds going around to confiscate or something along those lines. But if youre asking whether or not feds were called on someone at a public range for using an FRT, probably not

I heard that the Kabuto style drop in FRTs required a spacer or something to work with lowers with M16 pockets, anyone have a link to such spacers?

>>65394757
Interesting data point, thank you, anon.
>>65394758
>called on someone at a public range for using an FRT, probably not
More in line with what I was thinking.
Just curious if we've hit the point where everyone is so desensitized to fast guns that they've begun to just assume it has an FRT and not bother to inspect it.

>>65394775
one other point, but to be fair this guy was a retard

He put a FRT in a rented range gun and he got the cops called on him. This was in D.C to be fair where they are illegal

https://www.ammoland.com/2025/10/man-faces-machine-gun-charges-for-owning-a-forced-reset-trigger/

>>65394401
>>65394457
Been waiting for a 320 one to drop for my flux.

Placed an order for one. Was in a hurry and realized after the fact that the auto fill didn't put my cuckshed number in. I'll drop a little mini review when/if I get it. Finding an FRT friendly range may be difficult though. Any DFW anons got a recommendation? Would be willing to drive a couple of hours.

>>65394787
>cuckshed number
what?

>I'll drop a little mini review when/if I get it.
please do!

>>65394786
>Four days later, someone made an anonymous text tip to the Metropolitan Police Department (MPD) reporting that Avissar had an FRT and was a resident of D.C. It is unclear if the anonymous citizen was an employee of SEG, but whoever it was had access to his name and address in D.C.

some people have infinite time

>>65394793
Apartment #. Worst case it should get delivered to the front office. Might be a funny interaction depending on how obvious the packaging is...

>>65394787
take pictures!

File: 123.webm (2.64 MB, 720x1280)

2.64 MB WEBM

another s3igu2 update with the scar

uncut trigger and OEM housing is nuts. I'm assuming he made a similar cassette like the mp5

>>65394787
Good luck. Definitely interested in buying one so please let us know how it goes

>>65395233
>scar 20 go brt
Oh hell yeah

>>65391558
Anyone?

Opportunity for a trigger kicker @$50, cop or buy from Hoff?

>>65395458
well if you get it from hoff, you know it's made correctly

vector FRT

https://youtu.be/vr1mKPP5gxo

>>65395456
No legit website will do that. Get a 3d printer or order off temu

>>65395465
Niw Hoff.

>>65395384
to be fair, you can use a FRT with the SCAR today

>>65379515
>>65373312
Hope they'll have 416 levers for this

File: Screenshot from 2026-08-0(...).png (294 KB, 531x726)

294 KB PNG

>>65395676
he posted this as well, I dont think hope is needed here

File: Capture.jpg (107 KB, 956x1215)

107 KB JPG

PS90 Overtravel limiter is out by IzhmashArms

should work for wd90 as was as the xprt

https://makerworld.com/models/3119140?appSharePlatform=copy

>>65395782
>>65383458
What's the difference between this and the second picture that has something in the back vs the side?

>>65395996
the first one was from a different designer the second one is made by the guy who sells them on gunbroker

I dont think the first guy is making it anymore, because of the second design

context is in this thread

https://old.reddit.com/r/ps90/comments/1vc2clj/ps90_frt_overtravel_limiter/p0zk5w8/

>>65367016
Let's say I wanted to add one to a 308 Galil ARM....?

File: 1659816064285360.jpg (85 KB, 671x866)

85 KB JPG

>>65377977
im all for FRTs but i dont think id trust an FRT'd 320, i feel like that thing would just get a runaway bolt/slide if you look at it wrong

>>65396009
Oh excellent, thanks for that.
I do have some issues with mine so I'll try and give this a go

>>65377977
Is this the one that was designed by the gay guy from /nfl/?

>>65396018
good luck, please report back as well for data

>>65396077
no?

File: Capture.jpg (139 KB, 1188x1297)

139 KB JPG

FS2000 is on the menu!

>>65396291
k

>>65396308
I wish these were still being made. I've got one, but too chickenshit to put a FRT in it due to the uncertainty of getting repair parts if something breaks.

Sure would be fun to got brrt with the tactical tuna though.

>>65392094
You can buy the tx22 disconnect for like 8 bucks

>>65397135
Yeah and you can buy like 10 of them for 8 bux from SCS.

>>65395782
IzhmashArms is a fucking slimeball who wants $75 for a plastic P90 selector

>>65367016
What's the over under on something for the Hellion? I heard about one for the AUG but I admittedly don't know very much about FRTs in general so I was hoping someone here would.

>>65397880
there is not a frt released or in development for the hellion as far as I know

File: 123_compressed.webm (3.28 MB, 720x1280)

3.28 MB WEBM

Advanced Reset Tech is making a AK FRT

File: Capture.jpg (72 KB, 1430x727)

72 KB JPG

Wish this had more information

File: 123.webm (2.08 MB, 720x1280)

2.08 MB WEBM

Wish there was more PSA Rock 5.7 footage.

>>65399240
>ran out of storage
more like ran out of basic competency. what a stupid way to try and build hype

>>65371305
He should delete himself next.

>>65400605
what do you mean? You mean they made a short video on purpose?

looks like there will be a PSR video on the texas triggers 320 frt.
their website teases it but then fails to load a video. so hopefully we can see what it is.

File: 20260316_083155.jpg (71 KB, 959x959)

71 KB JPG

>>65400853
It's finally time for me to buy a Flux for mine

>>65400853
I'm curious as to how it works and if it's more intuitive than the glock frt

>>65397880
Hellion's a bit fucked apparently the hammer is off centerline

Is the ASD ARHK ever coming out?

>>65401042
late AUG

>>65401042
Just two more months
Trust the plan.
>Another year on the 249
I'm gonna lose it

File: 1769197671672025.mp4 (1.33 MB, 476x360)

1.33 MB MP4

>>65367016
Are there FRTs for the Beretta M9s?

Shotgun FRT when?

>>65401419
Yes there are, check the link in the OP

https://youtu.be/-v75QmQbrUw
https://youtu.be/45o2k8CIcX0

>>65401423
You can put a FRT 2 types of shotguns, you can get a 308 super safety and it'll work with a 12 gauge upper and you can put a super safety in a JTS M12AR and today you can put a FRT in a GEN-12 although there is a service for that, ARC support will be later

https://youtu.be/TA4ISyXWNAs
https://youtu.be/thgY9kQLRhs
https://youtu.be/LB_iLTcY1kc

>>65401423
i think an AA-12 like shotgun would be better. maximum ROF isnt that good.

File: cdn.storynavigation.jpg (242 KB, 1440x2560)

242 KB JPG

Another s3igu2 tease

bump

I was doing thinking the other day, how hard would it be to produce a double action revolver frt? I imagine it would have to be an original design where the cylinder rotation reset the trigger each time and it sounds like some Keltec type shit

>>65402503
that would be interesting

>>65403234
sounds silly. get something like a Mateba that you'd need to reload almost immediately.

File: 123_compressed.webm (2.3 MB, 360x640)

2.3 MB WEBM

New ARC Stealth selectors in a MPX for the ARC Fire V2

Any updates on the progressive frt AUG trigger pack?

>>65403945
the same, you can pre order it, but I havent seen news about it in a while

>>65403945
>>65403950
Late this month, last I heard.

>>65404361
got a source?

>>65404365
Them and me. I'm one of their pre-orders. That's what I got in an email.

File: P320 EDGELORD 1.jpg (2.43 MB, 4624x3472)

2.43 MB JPG

>>65394787
Ok, just arrived and decided to drop a quick update/first impressions.

Definitely getting why there is a complete lack of pictures on the parts. It's just a modified disconnector and a couple of 3d printed spacers. Once people get their hands on them I expect plenty of copycats at a fraction of the price to be out on the market in weeks or months. I don't begrudge them the price though, I have 0 problems with paying a premium to the first person to actually bring a neat idea to market, but if you are a budget oriented type you might wanna hold off for the $50 copycats. Quality of the modified disconnector is pretty good at first glance but I'd expect it to be considering. I wont have time to get it installed and function check the thing for a couple of days and will drop another update when I do. As you can see I'm pretty terrible with pictures, if anybody has a particular request then let me know and I'll try my best with some better lighting. Installation guide below for the curious.

https://texastriggerusa.com/installation-guide/

>>65404408
thanks for the follow up and picture!

File: P320 EDGELORD 2.jpg (2.86 MB, 3472x4624)

2.86 MB JPG

>>65404408
Other side of the disco

>>65403945
https://x.com/i/status/2085638162433356203

>>65404612
wow this is pretty neat, ROF is very slow though

I'm adding this to the github, thanks for posting

>>65404678
>>65404612
looking at this again, is this even a FRT?

>>65404612
>>65404678
>>65404759
This isn't a FRT, Corvus Defensio is not a US based company.
The progressive AUG FRT is from Red Star Palmetto, a US company

>>65404908
okay, I took it off the page

>>65403950
>>65403945
The AUG, PS90 and bullpup kit w/ JAKL & /AR Foxtrot mike uppers (FS-2000 & BRN-180 frt inbound with plenty of bullpup kits out for it) are the only current bullpups with FRT capability right now correct?

From my knowledge the Tavor and Hellion have no FRT's, with the Hellion being design handicapped

>>65404931
FS2000 and BRN180 FRTs arent out but are in development

I'm not aware of a trip for the foxtrot mike uppers

>>65404931
Tavor is in development

File: 1622947373700.png (1.49 MB, 1440x1680)

1.49 MB PNG

>>65404408
>>65404413
P320fag here. Thanks for the pictures! its pretty clever honestly. but my immediate reaction was
>really?
Both of our systems require the complete disassembly of the FCU. But looks to me like theirs will require another dis/reassembly to put the factory disconnector back in, OR they will sell a stumpy disconnector without the side protrusion that acts upon the safety lever. considering they likely just stocked enough parts to get the bag before the race to the bottom im skeptical. but maybe they will later. They did the smartest move they could have i guess. I understand the short term but im looking long term. Plus the need for a different spring and guide rod for the compacts is interesting and ironic for myself. I tested my first prototypes on the compacts since they were the cheapest and didn't need such changes.

I was so sure they were going to go the Browning exploit route. so props to them for spicing it up honestly.

Only real update on my part is a 5K round torture test was done on the most recent revision and it held up very well. we'll see how the competition holds up.

Fun story, I actually asked texas triggers if they were interested in mine since i had no idea they were working on their own. They took my surface level info and ignored me kek. Thats life. Then they posted their first teasers on their instagram story that next monday, like back in april? I know i lit a fire under them, at least a little.
>inb4 coping
a little bit. But now im feeling even more strongly about my position. or maybe im delusional.

>>65404408
>>65404413
125 dollars for that is retarded

>>65405039
I'm more interested in your solution honestly

File: cdn.storynavigation.jpg (400 KB, 1440x2560)

400 KB JPG

Another scar teaser by s3igu2

Honestly incredibly impressive, not sure how he did it here

>>65397834
just dont buy it?

>>65400778
yeah instead of just being upfront and telling people about their product

bump

File: 1778628039532100.png (595 KB, 837x688)

595 KB PNG

>>65388618
The range/shop ingo to sells them. Just found out after eyeing them behind the glass today.

>>65395697
Got an email back from them and they said they had no plans of offering screwless HK selectors :(

>>65407846
I'm going to KMS myself.

File: 20260808_194308.jpg (545 KB, 3000x4000)

545 KB JPG

>>65395782
It doesn't work at least for dryfiring. I can still induce a malfunction where the bolt gets stuck on the back by cocking > firing and keeping the trigger held back > cocking > pulling the trigger again as far as as humanly possible > cocking

>>65407995

Thanks for testing

hmm, maybe he's still working on it?

maybe it needs to be extended more or something.

is it at least better than before?

File: 123.webm (3.36 MB, 720x1280)

3.36 MB WEBM

Looks like advanced reset tech is working on a mac 11 FRT. It's based off of the MPA Defender FRT from toadlicker

My FN Five SeveN needs an FRT

PSR PS90 video

https://youtu.be/kWOZIuhuh_4

Installed and tested my arc fire yesterday.
This feels so goddamn good.\
God, why didn't I get into this sooner?

File: 1784294091181052.jpg (35 KB, 640x646)

35 KB JPG

What is the viability of fartsausage for TEOTWAWKI?

>>65408594
I can't watch this now. Does he include a coupon code or not? Just tried "psr" and it does nothing.

>>65408677
Based.

>>65408698
>I can't watch this now. Does he include a coupon code or not? Just tried "psr" and it does nothing.

not for the FRT

>What is the viability of fartsausage for TEOTWAWKI?

I personally think for an AR, the ARC Fire is extremely viable. Lots of people tried to shut it down but holding hard, but it continues to work. The lever is also extremely robust and will last a significant amount of rounds

>>65408703
>not for the FRT
Dangit. I was hoping for the nudge to make a financially irresponsible decision today.

>>65408698
Probbaly better to just get an auto sear desu. They're cheap and legal to get. Just need to wait for the apocalypse where laws don't exist to drill the hole

>>65408789
It's not like there wont be plenty of M4's laying around

>>65407704
I wish that were me.

>>65409748
i know right, that pizza looks great

File: 51a7b3a0038e2749d032ceb3a(...).jpg (38 KB, 464x461)

38 KB JPG

>want to get HK levers for my MR556
>HK levers only work with 45/90 ARC
>fucking no one makes 416 clone lowers woth 45/90 markings

>have mp5 with frt
>Know someone selling ap5k with 3 mags, optic mount, and brace for 1300.
>Might be able to jew em for 1200.
Do I do it and plan for the ARHK?

>>65410745
I would seems sick as fuck

File: CMAF_720 [CMAF_720].mp4 (3.42 MB, 720x826)

3.42 MB MP4

T7/NT7/SP7 3 position FRT announced

https://old.reddit.com/r/supersafety/comments/1vklww3/t7nt7sp7_3rd_position/

https://old.reddit.com/r/supersafety/comments/1vjzkh9/t7nt7sp7_assisted_reset/

>>65410829
Just found out it's an ap5-m. No threaded barrel or tri-lug. Gonna pass on that sadly.

File: HCF7ppJWAAALqJp.jpg (41 KB, 648x564)

41 KB JPG

>>65410956
Nice. Should have time to get perfected before the HK SP7 eventually comes to market.

>>65404408
>>65404413
Update:

Set aside some time and got the thing installed. Doing a complete disassembly/reassembly any time you want to switch from FRT to normal is not something im looking forward to. They REALLY should at least drop a normal function disconnector for the thing. Hopefully somebody will come out with a 3 position(not sure how youd manage it but im not an engineer) in the next couple of years making that point moot. As far as changes in function go the thing seems to work at least with dry fire. The point of resistance when pinning the trigger back hard is during the unlocking and initial rearward movement of the slide. Pinning it back hard creates quite a bit of resistance. Only live fire testing will show if this induces reliability issues and a lighter press is required to alleviate that. I put it into a compact that's sitting in a raider chassis. I plan to test it with the stock spring first to see if swapping the spring/guide rod is actually needed for proper function. The next big hurdle is finding somewhere within reasonable driving distance of DFW that'll let me actually run the thing. If anybody has recommendations I would appreciate it.

>>65411734
Got mine today. The way I plan to deal with this is I literally have 4 p320 FCUs...one of them is going to be the permanent FRT.

Installing tonight. Will test this weekend and report back.

>>65411734
>>65411907
thanks guys, very curious on the trigger pressure

>>65410956
they are working on a brn-180 trip as well. This is great since ASDesigns been dragging their feet on this

File: output.mp4 (1.26 MB, 720x1280)

1.26 MB MP4

Advanced reset tech has been dropping a huge number of projects lately

Picking up the Walther PDP torch

File: output.mp4 (989 KB, 720x1280)

989 KB MP4

>>65408391
update on the mac 11 FRT by advanced reset tech

>>65409752
I just want to be eaten by her.

File: pepe-1714989412167907.jpg (367 KB, 600x600)

367 KB JPG

Just wondering, is there any sort of class-action lawsuit against Cameron Smith and TwinBros for taking everyone's money and then scamming everyone by claiming "THE ATF RAIDED US!!!" and refusing to ship out any more SuperSafeties after they'd already been paid for?

I went looking at Cameron Smith's patent application filing for "his invention" of the Super Safety, and as far as I can tell it's invalid on its face because it was filed on December 4, 2024, whereas Tim Hoffman disclosed the Super Safety on July 21, 2023, sixteen and a half months earlier, far beyond the statutory limit for a post-disclosure patent application filing (even assuming that Tim "stole" Cameron's invention, which obviously he didn't, Cameron is just a lying scumbag and serial fraudster).

Is there any sort of invalidation proceeding going on against Cameron's fake and gay patent?

Looks like @customsmithmfg gave up on the 249 FRT

There are a lot of people working on a FRT for the platform though, just one less now.

>>65368739
Just run your sks without cleaning that free floating firing pin of cosmoline, like god intended.

anyways, yall think we're gonna see frts for the skorp and the vz58? Id rather not butcher a re-weld job anymore than i will

>>65390632
MMMMMMM SO TASTY
>>65390717
kek
>>65399240
>>65374998
>>65386769
AK frts are peaking my interest as well as i have an EG kit with an OG selector. any of these work with a full auto lever or will i have to blue yet another fucking part

uuoooohhhhhh stribog whennnn

>>65368739
>>65368793
Yes. Also the SKS is a bad platform for sustained root and toot em. Both the extractor and rim of the bolt will peen dumping fast and shooty. On a good note though, Norinco SKS's are like the cheapest of the SKS variants and you can find them between 300-500 if you keep your eyes peeled and look through used gun racks, auctions and listing sites.

>>65408789
>>65408698
fartsausage is a toy at the end of the day. Its a very cool and funny toy, but it is still a toy. Its also a toy that can probably do good work for you if you let it, but don't be afraid if it breaks.

The only one I have seen that basically is indestructible is ironically a Rare Greed. I might trust a rare greed because I haven't seen them fail like super safety derived designs which all seem to fail around that lever snapping. The arizona regulator style may also work long term but they have some wear surfaces which doomed the kabuto style but idk.

Other FRTs for other platforms are toys, caveat emptor.

>>65411734
>The next big hurdle is finding somewhere within reasonable driving distance of DFW that'll let me actually run the thing
Mister Guns in Plano is extremely lax if you don't mind indoor. ETTS in Waxahachie also supposedly allows frt but I've never been there, was actually planning to go check them out this week.

>tfw its cheaper to FRT my mr556 than make it FA
This is the worst thing Germany has ever done

File: Screenshot from 2026-08-1(...).png (199 KB, 1257x743)

199 KB PNG

new cassette trigger from sylvan arms

https://sylvanarms.com/product/safrt-forced-reset-trigger/

Cheapest cassette on the market right now

>>65414547
2 position only, may not matter for some people

Duality Arms Co announces FRT for Taurus RPC

https://kg2g.github.io/FRTINFO/Footage/taurusrpc.mp4

>>65414547
saw this yesterday looking for a magwell. basically no information on how it performs.

>>65413351
Adding onto this. He's selling his prototype M249S w/FRT on Gunbroker.

>This is my M249s Para that I was using to develop a FRT for. I was close but just could not get it 100% right. The winning bid will get all of my prototypes, all of my cad models so they can continue this if they want.

>This 249s is in excellent condition. It has seen about 500 rounds through it.

>Comes with Original BOX and docs, Links and extra links.

>Please email me with questions.

>Footage of the FRT can be found on Instagram under CustomSmithMFG account.

https://www.gunbroker.com/item/1196792551

>>65414801
seems like a good deal

>>65414801
>8.5k for a 249s
Eh not bad. What happened with the FRT? Was it just not working reliably?

File: Screenshot from 2026-08-1(...).png (475 KB, 1257x743)

475 KB PNG

https://www.gunbroker.com/item/1196255978

what's the best option for a 3 position FRT for a """mil-spec""" AR-15? i've heard conflicting things about Arizona Regulator, as an example.

>>65416360
The Arizona guy is batshit insane. Apparently his product works well, though.

>>65416379
i read that he's a rude asshole if you need tech support. i also read of some issues physically fitting his FRT system into a mil-spec lower without milling some addition clearance. it was unclear if it was a tolerance issue on the mil-spec lower or the FRT system.

>>65413931
Rare greed shill detected, the arc fire is the best frt hands down. You can just straight up hold it down unlike rare greed

>>65416399
>You can just straight up hold it down
you can do that with the raregreed, do you just mean you can hold a lot of pressure on it or something?

>>65415821
I'd wait on those. Allegedly BRP is making their own FRT option for the MG42. They're the guys who made the semi auto conversions in the first place.

>>65416409
source?

Test

File: 1785893045362682.jpg (100 KB, 456x434)

100 KB JPG

>>65417582
MODS!!!!

bump

File: texas trigger spacer broken.png (1.04 MB, 757x933)

1.04 MB PNG

https://www.youtube.com/watch?v=BeaC6WAKKI0
there's at one review up for the texas triggers 320. looks like a mixed bag based on his testimony. one of the 3D printed spacer pieces broke very early on.
>picrel
who knows how long the other will last. maybe people can copy the part and make it out of a softer metal instead of plastic.

File: FRT M9.jpg (3.08 MB, 4000x3000)

3.08 MB JPG

>>65401419
Yes, I own one. It's good but needs a lot of tuning compared to other frts. Also you 100% need a compensator for it due to how aggressive the recoil is. I usually do 2 to 3 round bursts.

>>65414008
I have an arc fire in my hk mr556a1 and it was drop in. I also have a geissele trigger I modified to worth with it too.

>>65419438
>one of the 3D printed spacer pieces broke very early on.
So just figure out the measurements, whip one up in CAD, and print a dozen replacements.

File: 20260813_082332.jpg (1.38 MB, 2804x1960)

1.38 MB JPG

>>65419450
Why not just put a bipod on it?

>>65419457
Yeah I was going to grab one. Just weird how difficult it is compared to an AR to make FA. Need a new BCG, dremel out something in the upper, plus a FA trigger is like $500.

>>65420159
you can use the semi auto bolt and it'll still work with the ARC

>>65420165
>>65420159
Want to be clear here, the semi auto bolt will still work with the HK mr55a1. a normal AR would need a FA bolt

>>65419438
good video

>>65420159
I didn't have to change my bolt or dremil anything in my mr556a1 upper. I also didn't have to change my buffer weight either. I just put the arc fire in and it runs great.