[a / b / c / d / e / f / g / gif / h / hr / k / m / o / p / s / t / u / v / vg / vm / vmg / vr / vrpg / vst / w / wg] [i / ic] [r9k / s4s / vip] [cm / hm / lgbt / y] [3 / aco / adv / an / bant / biz / cgl / ck / co / diy / fa / fit / gd / hc / his / int / jp / lit / mlp / mu / n / news / out / po / pol / pw / qst / sci / soc / sp / tg / toy / trv / tv / vp / vt / wsg / wsr / x / xs] [Settings] [Search] [Mobile] [Home]
Board
▼ Settings Mobile Home
/k/ - Weapons

Name
Options
Comment
Verification
4chan Pass users can bypass this verification. [Learn More] [Login]
File
  • Please read the Rules and FAQ before posting.

08/21/20New boards added: /vrpg/, /vmg/, /vst/ and /vm/
05/04/17New trial board added: /bant/ - International/Random
10/04/16New board for 4chan Pass users: /vip/ - Very Important Posts
[Hide] [Show All]


[Advertise on 4chan]


Autism Edition

Discuss your moldy surp.

Thread question: What's a milsurp YouTuber you enjoy?

Recent News:
- Shits fucked m8

Previous Thread:
>>
>>65605005
Of course I forget the previous thread.

>>65487895
>>
File: 1792720370750724m.jpg (266 KB, 1024x768)
266 KB JPG
I really need just like 3 more.
>>
So what's the new thing everyone is getting these days?
Last time I got something was the Flecktarn jackets and Alpenflage field shirts everyone ordered for cheap. I still have those but I lost 60lbs so now nothing fits me anymore. I wanna keep up with the current trends.
>>
File: stacking intensifies.jpg (2.73 MB, 2315x1868)
2.73 MB JPG
>>65605005
I am honored you posted my Saigon Sam for the OP.
>>65605125
Good job on your weight loss. In terms of milsurp clothes I haven't bought any in so long. I do want to buy some P41 or P44 dungarees to match my Late WWII/Korea USMC kit.
>>
File: We attack charlee.jpg (1.21 MB, 1848x2569)
1.21 MB JPG
Only one of these is a true milsurp but all have some surplus parts in them at least.
>>
What did I buy? Been wanting a Lee-Enfield for a long time, the long branch no4 mkIs were already sold and last one left was $150 and I sent it. It was labelled "no4" but on the left receiver a faint "No.4 MkII Fifth" that ai only saw after the paperwork was done, with a crowned "L7" on the band by the trigger guard. A crowned OEW on the barrel band, and only a + next to a 6 or 9 on the top of the receiver. I'm in the weeds looking for markings and haven't found much. Mismatched magazine numbering but the serial starts with a 25. Please help me autists
>>
Always been partial to Mike B. for milsurp clothing and gear. Even met him a couple times at gun shows over the years
>>
>>65605065
>>
File: 1783996559230.jpg (3.62 MB, 4000x3000)
3.62 MB JPG
Loving my fn-49. Great shooter.
>>
>>65605677
>Good job on your weight loss.
Well, thank you very much. But I didn't really work on it or anything. I've always just been a lifter and not a cardio, calorie counting, macro counting mfer. Men in my family just have their metabolisms increase after 30 for some reason. I'm still eating whole frozen pizzas and store bought snack cakes like a fatass.
I had to call my dad and grandpa thinking I had cancer, but they were 200lbs+ till their late-20s/early-30s and then they just dropped to 150lbs or less at the same age as me. Guess I'm lucky or something to some people.
Either way, I'm a small now and I want to get some more cool surp to wear.
>>
If you're losing weight and don't know why, consider diabetes. Do you experience excessive urination and excessive thirst? Are you constantly fatigued? Do you eat and drink whatever you want but still lose weight inexplicably? Go buy a blood sugar test kit or ask your doctor for the urine test. The earlier you start treatment the better your chances of avoiding permanent nerve and blood vessel damage!
>>
/msg/ - monosodium glutamate
>>
>>65606625
He did explain that there's quite the genetic precedent for what happened to him
>>
>>65606625
Oh don't worry about that. I already got a full battery of tests after I lost the first 40lbs. It's not the beetus, they said I'm at the cusp of pre-beetys, but they said that anyone on a high sugar diet after 30 will appear that way. Nope, just burn calories a lot now. I also plateaued at 148-152lbs, so as long as I don't lose more weight, I'm not worried.
>>
Gayvar has vz-61 kits in stock. Go gettem boys
>>
>>65606726
Any of the cheaper ones without the barrels avaliable? I remember there used to be like $199 kits because they didn't have barrels and I'd rather get a threaded one anyway to suppress.
>>
>>65606744
I don't think so. These are nice because the barrels are already installed. Very easy to put together with a tort tort reciever.
>>
>>65606744
Whatacountry has yugo ones without the barrels for $230.
>>
File: 312313313.png (448 KB, 640x480)
448 KB PNG
I ask again since we are still on it a bit. Anyone have any good recommendations for repro gear and uniforms. Stuff that re-enactor communities use? I wanna find and setup a pre ww1 French getup with the Kepi, blue overcoat and the dumb red pants. Among other stuff
>>
>>65606794
Hikishop tends to be the go to for beginner shit. Just note it is a Chinese company so the quality can be hit or miss. For the better stuff I would try to contact any French unit that's looking for bodies WWI or not, totally recommend this because some units can be absolute stitch nazis on the stupidest shit. That said a lot of units are willing people on, but WWI tends to be more niche compre WWII.
Just trying save you money and from disappointment if no unit wants you. Rockford has large WWI usually in the Spring so that might be worth checking.
t. WW2 renactor (Not telling what unit since we're kinda of niche unit).
>>
>>65606898
It's ok, we all know you are from rommel's 4th femboygrenadier division
>>
File: Sopranos AIDS.gif (772 KB, 640x355)
772 KB GIF
>>65606625
He had AIDS, Vito?
>>
>>65606925
Nah man I'm in Patton's 2nd Faggot Armor Division.
>>
>>65606898
Good info thanks. I'll refine a bit tho. Im not necessarily looking to outfit for an actual unit or get into reenactment. Mostly just goofing around range shenanigans so quality can be a toss up.
Nice tho Hikishop appears to have what I need with Kepi+red pants+coat. There appear to be 2 a .biz and .com and I saw some people say one or the other. whats your take? Also Chinese quality/fit be damned i wont mind for what i'll be doing with it.
>>
.biz has free shipping but some items are priced a bit higher than on the .com site to adjust for that. Because of shipping costs and import fees nowadays I would order off .biz
>>
>>65606936
Yeah, yeah, yeah I haven't heard that one before. Whole year I've been getting that joke. Shit this happened to my dad in the late 80s and apparently his friends called him Ryan White when he dropped the weight.
>>
File: timeformilsurp.gif (1.75 MB, 451x330)
1.75 MB GIF
>>65607180
Neat. Interesting enough tho. .biz only has the madder red cavalry officers trouser. vs .com having the madder red infantry. Madder red infantry +shipping off .com comes out lower than madder red officers without shipping. Even with the price diff of the other items in my cart, the pants tip the scale for .com being cheaper even with the shipping.
So ill go with .com for this order, but ill keep it in mind for other orders.
>>
Real stupid question. Would full disassembly and reassembly of a lee enfield no4 change the zero? I know if you don't tighten the screws just right for the best lockup it will screw with the accuracy but what about zero? I thought I had rusting under wood (I didn't I was just paranoid) and decided to take it to the range and it was 4" high and 4" right compared to last range outing. Same bullet weight handloads and did it with both IMR4895 and some BL-C2 loads I was testing at the time.
>>
>>65607615
If you alter how the forearm is bearing on the barrel it will consistently alter the point of impact.
>>
>>65607615
Yes. As weird as it sounds to us now they really weren't meant to be taken apart, milsurp guns in general besides something like the M1 where you HAVE to remove the stock to disassemble it
>>
>>65605780
I accept clones of military issue rifles as civilian versions of military rifles.
>>
Tried to buy 300 rounds of hxp .303 off some old fag at a gun show today. He wanted 360 and I wouldn't pay more than 300. I think that's pretty fair. Guy was a dickhead and his buddies were butting in on the negotiation. Whatever, don't sell anything and smell your buddies farts at the table.
>>
>>65609308
I think you were more than fair. Auction here last week had an unopened can from 1975: it only brought $237 including fees and theft. Boomers gonna Boom.
>>
File: 1778452866814183.png (165 KB, 1891x716)
165 KB PNG
>>65609308
You can get new production .303 for a buck a round with free shipping so chalk it up to another boomer moment.
>>
>>65610308
Exactly. That's what I told Mr boomer. Hxp is nice brass to reload. These people are insufferable. I told him I know where you got it. Max arms had them a year ago 220 shipped. I'm going to load up some PPU brass I've been saving life goes on for us. The boomers are on borrowed time. After going to a nicer gunshow a few months ago, this was a reminder of the absolute disgusting mongoloid, white trash fucks that go to these shows.
>>
Got to see (and handle) a mint 1899 Nagant revolver recently. When did everything Russian turn into smekalka and trash because that gun was a fucking masterpiece in terms of fit and finish
>>
>>65613573
The Bolshevik revolution and its consequences have been a disaster for the human race.
>>
>>65609308
Remember tho for every turbo shit boomer like yours, theres a based boomer somewhere willing to give you shit for free.
>>
>>65614328
Concur
t. bought an L1A1 from one for €400 because he wanted it to go to a young guy who would actually shoot it
>>
File: 1781687441103.jpg (1.48 MB, 2571x3862)
1.48 MB JPG
>>65614336
Based
>>65614328
Wish I ran into more of them. I did get a correct No1MkIII* at the last show for 400 from boomer. A good price and nice bore. He did tell me after he bought like 14 milsurps for $1200.
>>
So I finally moved to a non-homosexual state that allows me to have a C&R. I've got the form and plan to fill it out, but is there anything I should know before submitting it? I know it gives the ATF the right to audit me, but what does that entail? I've yet to ever sell a gun in my life, and I don't plan to do so. Are they going to anal probe me for buying old Mausers?
>>
>>65616031
>but what does that entail?
Unless they get a warrant all they can ask is to inspect your bound book, which you can do either at the address you use for the C&R or you can bring it to the nearest ATF Field Office.
>>
I missed all of the surp golden ages
I have an arisaka 99 because I'm a weeb and some soviet pistols because they are cheap
Any good buys currently? Help a newfag out
>>
>>65616344
It's literally ogre if you just want cheap stuff. You can occasionally find a Yugo mauser or a mosin though, but be prepared to spend like $400.
>>
>>65616344
Carcanos can be found for $300 or less and you don't even have to settle for rti if you look.
Good K31s can be found for $500 when the import batches hit.
Star 30m is a cheap as dirt wonder nine. This is likely missable content once the current glut runs out
>>
>>65616398
That's too bad
Cheeap stuff that makes a bang is mostly what i want
>>65616400
Are the carcanos decent? I was defnitely eyeing them
I live in a shitty 10rd state so didnt want to buy a star or anything with a standard mag capacity because it would have to be mutilated to be legal
>>
>>65616418
The problem with Carcanos is the ammo. 6.5 is like $1 a round now, and lord help you if you need 7.35.
>>
>>65616452
That sucks, but still cheaper than any 7.7jap ammo (especially the fmj that will acutally feed reliably past the 3rd rd unlike the cheaper soft point(in my gun))
If you intend to reload are bullets in this caliber prohibitively expensive (i am about to search this right now)
I have been saving brass and wanted to give it a shot anyways
>>
>>65616344
South American/Spanish Mausers are high quality and still cheap. Some were even rechambered to 308 prior to being surplused out.
>>
>>65616472
I saw a very nice one at an lgs. Chilean i think
It was gorgeous, near mint on the exterior, but i think they wanted $7-800 for it which was too much to impulse buy without researching
>>
>>65616452
>The problem with Carcanos is the ammo. 6.5 is like $1
The ammo is the least of the issue with carcanos. Sure, it ain't cheap, but the worst part is it won't shoot for shit out of what's available. I got a $120 one at a Big R back in the day and I was able to inspect it before I bought, so I'm good. My buddy got one from J&G a year ago and it was basically a smooth bore and had so much pitting, I'm shocked they didn't operate like porting. PPU ammo was keyholing under 50yds.
My carcano also functions fine with .266" factory ammo, but I paid $150 to get a .269" mold for completely proper sized bullets. Even when we tried my properly sized loads in his gun, keyholing was less of an issue, but groups were almost 6" at 50yds from a rest. In mine it's just a little over an inch.
The only ones left are just the worst of the worst.
>>
>>65614328
Don't think I've ever met a boomer who wasn't trying to squeeze an extra buck out of me
>>
>>65610632
>Nice try gramps, this time I know what YOU'VE got
Genuinely warms my heart to see moments like this.
>>
File: Saint_Carlin.jpg (125 KB, 810x610)
125 KB JPG
>>65616537
Many of them don't have a pot to piss in besides their home equity, a pension collected 20 - 30 years ago, and *maybe* some money they got from their parents' estates. It's why they go white as a sheet when someone advocates shrinking social security by a single dollar, and look at you like a wounded animal when you offer less than what they ask at gun shows.
Picrel was right about them.
>>
>>65618153
George Carlin was such a gigantic fag
>I'm gonna go on stage and cry about the world for an hour and call myself a "comedian"
>>
File: 1767961131272652.png (1.18 MB, 751x794)
1.18 MB PNG
this is my first gun xd
yugo mauser
>>
>>65605065
I want another Ishapoo, but I don't wanna play the mag functionality lotto
>>
I'm debating between an FRF2 and an SVD Clone. How good are the FRF2 imports?
>>
File: IMG_20260711_141802~2.jpg (758 KB, 662x3807)
758 KB JPG
>>65618994
>SVD clone
>not a real one
>>
>>65618791
Good choice. Grab a bunch of Greek hxp 8mm while it's still available and cheap-ish. Just make sure to clean after since it's corrosive.
>>
>>65606493
Stop bragging. That boomer asking $2800 for a Colombian 30-06 is not willing to make my desires come to fruition
>>
File: that thing.jpg (11 KB, 320x237)
11 KB JPG
>>65616537
Theyre out there, just gotta find them. The other anon isnt far off though. At this current point in time, boomers are truly staring down their mortality and they are grasping whatever is left. Depending on their family and/or economic standing this means theyre gonna fleece the fuck out of you or theyre going to like seeing their hobby continue on to the younger generation. Like with all generations, people are dictated by their personalities. There are shitbags in all of them, its just that time (and lack of any remianing) really lays it bare
>>
File: 1772188928979670.jpg (2.03 MB, 4096x2304)
2.03 MB JPG
>>65619005
I bought a spam can to go along with it, but I'm not actually sure how to open it so I have that to figure out. I will also need to get a cleaning kit and stuff, since as I mentioned this is my first gun.
Paid $340 for the rifle and $265 for 380 rounds, through a friend of a friend. The action feels nice and the bore looked decent enough to me. I just wanted something old and cool that wasn't going to cost an arm and a leg to shoot. I don't know if thats an amazing price or not, but when I went to the gun store near my house, even the nugget and norinco SKS were more than I paid, for just this rifle so I'm feeling pretty happy regardless
>>
>>65619029
You use a spam can opener. 70cpr for 70s Romanian surplus is fine. That stuff is generally consistent and doesn't suffer from issues like hard primers (Yugo) or pissin hot loads (Turk).
>>
>>65619029
>You use a spam can opener
I used a flathead screwdriver and a hammer once
>>
File: Mosin Innawoods1.jpg (3.08 MB, 3024x4032)
3.08 MB JPG
Grabbed moist nugget
went innawoods
Mini pic dump incoming
1/3
>>
File: Mosin Innawoods2.jpg (3.17 MB, 4032x3024)
3.17 MB JPG
>>65619712
2/3
This is a cozy spot
>>
File: mosin innawoods 3.jpg (3.11 MB, 3024x4032)
3.11 MB JPG
>>65619732
and 3/3 fin
Nugget is a m1891/30, nothing special, izhevsk 1943 built, must've been retrofitted at some point with the brass handguard because izhevsk stopped fitting them with brass handguard accoutrements and sling slots before 1943. Stock is in great condition. The original seller claimed this was a finnish capture based on a dubious "S" in a circle stamp, but I don't personally believe that, and think instead it's just a normal izhevsk with a post-war retrofit.
thanks for reading my plog (picture blog)
>>
Just bought a garand kit from apex
I'll post it when it gets here
Going to go to Alabama and pick up a reclaim receiver to build it on
Its not worth the price but I just want to build one anyway
>>
>>65619936
How close are you to Alabama, anon? Why not just have it sent to you by mail?
>>
>>65619943
The talladega park is only 2 hours from where I live in GA
I just want to pick out the receiver that will be at least as old as the barrel. An older barrel on a newer receiver would trigger my spergism
>>
what is the going rate for a Remington contract nugget these days? LGS surprisingly has one and its the first time I have ever seen one in person. I know we all have billion dollar nugget fatigue but I think these are at least rare enough to consider making an offer. Its not sporterized either which is pretty huge
>>
>>65619986
Is it a finn capture or one of those that never left the U.S.?
>>
>>65619986
Numbers match? Condition? For me $1100 tops for 95% condition and matching numbers. For a run of the mill "town-bicycle" rifle maybe $600.
>>
>>65619986
I wouldn’t be impressed unless they had a bayonet
>>
File: 20261029_170354.jpg (714 KB, 1155x2644)
714 KB JPG
>>65620127
>>65620067
>>65620034
Let me make a correction, its made by Westinghouse not Remington. It is a Finn used example. It's not too beat up but certainly not pristine. The wood is nice and the cartouches are visible. It is a matching or at the very least "Finn matched" gun. It comes with a bayonet but I'm pretty sure it's not original. They want $999
>>
File: 20261029_170147.jpg (1.55 MB, 2164x3774)
1.55 MB JPG
>>65620466
bayo
>>
File: 20261029_170142.jpg (1.4 MB, 2202x3439)
1.4 MB JPG
>>65620471
>>
File: Finn_M91_05-26-2024_A.jpg (1.71 MB, 1020x1600)
1.71 MB JPG
>>65620466
Worth a little more than half what they're asking in that condition and merely "Finn-matching" IMO.

>>65620471
>>65620477
91/30 bayonet: $20 tomato stake adds basically nothing to the value to me. Finns didn't make much use of bayonets.
>>
>>65620471
>>65620477
Nah bro that’s a 91/30 bayo, shit wartime one too looks.

Westinghouses are easily recognizable by their old 1850’s lock ring
>>
>>65618800
DP rifle? My 1941 ishapore and 1957 2a1 all feed just fine. Is it common for ishapore mags not to work well?
>>
>>65620753
Yes it is common for the feed lips to be distorted. I had Bloke from BoTR trying to help me troubleshoot it in the C&R discord like 6 years ago. I got tired of messing with it and with the crazy nature of the gun market during the coof I made my money back.
>>
File: NEW M91 Mosin-Nagant.jpg (1.28 MB, 904x3914)
1.28 MB JPG
>>65619986
>>65620466
>Let me make a correction, its made by Westinghouse not Remington. It is a Finn used example. It's not too beat up but certainly not pristine. The wood is nice and the cartouches are visible. It is a matching or at the very least "Finn matched" gun. It comes with a bayonet but I'm pretty sure it's not original. They want $999
Too much for a Finn-matched rifle. If it was a US surcharge rifle, that would be a deal.
>>
File: received_1706520699496036.jpg (2.14 MB, 4032x3024)
2.14 MB JPG
>>65620790
Bad news fren. Youll find that on many lee enfields, not just Ishys. Most of them with issues just require minor tweaks... yours sounded like a mess though.
>>
>>65620800
>>65620562
>>65620550
thank you, I knew it was likely not going to be as special as as that price warranted.
>>
File: U.S. M1 Garand profile3.jpg (1.69 MB, 3000x2000)
1.69 MB JPG
>>65619712
>>65619732
>>65619743
Inna mountains kino
>>
File: Carcanbro.jpg (948 KB, 1840x1152)
948 KB JPG
>>65621032
Based. Beautiful view anon
>>
>>65621032
>>65619712
Pls remind me tommorow to bring mosin innawoods ill be out there sunday and will take shitty photos so I can contribute
>>
File: O_O.jpg (1.02 MB, 1848x2310)
1.02 MB JPG
Idk shit about antique handguns, but I about did a double take at the fucking price. I guess surviving examples are in the mid triple digits, if that? Is this even milsurp? At a smaller shop in NC.
>>
>>65622481
>mid triple digits
rookie numbers
>>
File: 1727179390594432.jpg (16 KB, 320x320)
16 KB JPG
>find pistol at online auction
>looks good but need a few pics and bore condition before bidding
>call auctioneer
>"sorry, all the guns are with the FFL. You can call him to get the info"
>call the FFL
>"Sorry, those aren't our guns, we need the auctioneer to authorize us to look at them and provide you with that info"
>call auctioneer back
>"I'll have to call them back so that they can email you that info"
>haven't received anything in 3 days now

What kind of ass backwards system do some of these places have? And why is it so hard for someone to look down a pistol barrel and tell me if it's pitted or not?
>>
>>65622695
no tire kickers sonny, the new owner can look down the barrel all they want
>>
>>65621691
Based
>>
File: 1330450796436.jpg (182 KB, 864x739)
182 KB JPG
So Ive read everywhere that replacing the springs (I know at least the one that handles recoil) and the bolt stop for a C96 no matter the condition is a must.

Do I just say fuck it and buy the complete kit from wolf springs or whatever?
Should I go for a newly made bolt stop or a original in good condition that I can inspect and guarantee condition?

I already fired it and it works great but from a preventative standpoint I want to make sure I do whats needed so I can take it to the range every time I want.
>>
Why is every PSL rifle called an SVD or a "Dragunov". local gunstore was trying to a PSL for 8k.
>>
>>65623213
Holy fuck you can't be serious, did you get a pic of the tag on it? Only reason to call it a svd/Dragunov is so someone who doesn't know any better who has a hole burning in their pocket thinks they're getting a "real russian" DMR
>>
>>65621691
Do eet
>>
File: 1789735430663375.png (1.39 MB, 993x733)
1.39 MB PNG
>>65619054
looked around and no one local had one so I just resorted to this >>65619098

Seems to cycle fine, a friend knows somewhere we can go shoot so maybe that will happen tomorrow.
>>
>>65619022
Dont think I havent noticed you posting all these Harvey Birdman images the past few threads.
>>
>>65622730
>no tire kickers sonny, the new owner can look down the barrel all they want
I hate how some boomers list guns with absolutely nothing on bore condition and never bother to clarify when asked. Do some people never shoot their guns?
>>
>>65622695
That's when I sperg out, say something incredibly spiteful and belittling, and swear to never do business with them
>>
>>65624681
ok boomer
>>
>>65618994
>>65619000
>SVD clone
???
>>
>>65624778
Age wise, no, but spiritually yes. I'm working on the anger problem
>>
>>65623213
They look vaguely similar. Also remember that it's NOT AR-10 NOT FAL NOT FN-49 NOT G3 NOT AK-47 etc.
>>
File: PXL_20260926_004827734.jpg (1.25 MB, 1739x2310)
1.25 MB JPG
>>65605005
I'll answer your question, I know people dislike him for the HEMA stuff which is just a cringe minefield all around. I am not exempt from that either. But I really like Matt Easton/Scholagladiatoria's research on Milsurp swords. Or more specifically, the non-regulation stuff. Paradoxically, the more regulation and official patterns and accepted models of swords that became established in the 19th century, the more interesting it is to find stuff that DOESNT fit the mold. Not in a bubba'd way or a backyard bladesmith, but when the official factories and cutlers make something special. There are the patent solid hilts which basically take officers swords and give them the wider tangs of the 1853 troopers sabre. Those are the most common 'rare' officer patterns but simultaneously the change that affords the most impact in performance. It redistributes more mass into the hand and allows what is USUALLY a wider but slightly skinnier blade which makes for better cutting. There are also changes like different blade types, lengths, and hilts. He doesnt talk about them as much as he used to publicly since like Ian/FW he has inadvertently created his own rival bidders, but now and then you'll still get to see something really cool.

I think what makes them the coolest to me isnt necessarily that they are different but more that they are different ON PURPOSE, meaning that the officer knew what he wanted and what/how to deviate from normalcy. Sorta implies a more experienced swordsman ordering a better sword.

Picrel are the 2 styles of unique hilt for the Warwickshire Rifle Volunteers. Both Mole & Reeves, 2 major cutlers primarily for the government & officers respectively were in the Birmingham/Warwick area. Got a reserve unit in the 1860s led by Reeves & Mole themselves even. They had a special hilt type made for them. None I've seen are as precise as Wilkinson, the right hilt there has a lot of file marks still. But still really unique and cool.
>>
>>65614479
based 1935 chilean carbine

I'm from Chile and lots of people here in my club have them. Also the 1895 and 1912 Steyrs, with the 22lr insert too.
>>
File: 31231313.jpg (519 KB, 1000x750)
519 KB JPG
I remembered to take the mosin with me today. its nothing special, just your basic ''42 Izzy 91/30
>>
File: 315465.jpg (528 KB, 1000x750)
528 KB JPG
>>65626857
>>
File: Snowy Garand.jpg (784 KB, 1355x1975)
784 KB JPG
>>65626857
>>65626862
Absolute KINO
>>
>>65626412
What ammo do you guys like to shoot for 7mm? 140gr spitzers? I shot the carbine the other day and got shit accuracy with S&B 140 fmj. Probably just the S&B light loads. I have the components to load for it, just haven't gotten around to it yet.
>>
>>65628010
honestly i don't know. I don't reload, I buy reloads from an old man at my club or shoot old ass surplus. I will ask him next weekend.
>>
File: IMG_0376.jpg (1.79 MB, 1600x1200)
1.79 MB JPG
>>65627303
Pasta Garand?
>>
>>65628936
Yeah, Breda, 30-06
>>
File: IMG_7704.jpg (2.07 MB, 1200x1600)
2.07 MB JPG
>>65629120
Nice.
>>
File: 1334762777082.gif (2.73 MB, 240x135)
2.73 MB GIF
>order gun from Classic Firearms using my C&R
>notifed that my package is coming in on Wednesday through FedEx
>at home waiting for package, then tracking shows delivery attempt made but no one answered
>wtf, check my door, no tag, check their proof, shows a door that isn't mine
>retard driver got the wrong address
>go through rabbit hole of opening support ticket for FedEx to fix their shit and contacting CF to contact FedEx to fix their shit
>FedEx fucks up again two more times
>then get notified they'll try again next Monday and they close my support ticket
>just kidding lol come to the facility to pick this shit up
>just kidding lol we're sending it back
>contact CF, they say if it comes back they'll have to either refund it or reship it at my expense and it would be through FedEx again
Refund it is, fuck this shit, fuck FedEx and fuck anyone that only ships through them
>>
>>65630041
Yep had a similar experience, bought from Classic and the delivery driver dropped it off at a police station thats next to my FFL.
Thankfully that police station was super chill and gave my dealer the gun cause apparently it happens all the time
>>
>>65619936
Just arrived but I forgot to take pictures. everything is pretty late production.
DAS walnut stock, stamped trigger guard, t105 sight, 5-50 springfield barrel. Everything is worn out and wobbly as fuck, but thats what I expected. The gas cylinder lock is all ground up and the lip of the gas cylinder lock screw was seemingly turned down on a lathe for some reason, and the tip of the safety was broken off, apex claims its an intentional "mod" done to allow the safety to be engaged with the hammer down. I'll probably replace all three. Otherwise everything else seems usable. I'll post tommorow i dont feel like it today
>>
>>65630041
My anxiety and rage would be through the fucking roof
>JUST GIMME MY OLD GUN RIGHT FUCKING NOW
I'd also be bargaining with God over it in addition
>>
>>65618153
>Picrel was right about them.
>a guy with millions criticizing other people making pennies
Haha.
>>
>>65605005
whats the /msg/ solution to rust on bluing? I keep it absolutely drenched in oil at all times but the MP keeps getting little brown specks around the magwell, and neither 0000 steel wool nor a brush has been able to remove it. I'm hoping its just patina.
>>
>>65630208
>>65630041
USPS once left a suppressor in my FFL's mailbox, he did not believe me when I told him there was a suppressor in his mailbox.
>>
>>65631879
anything that will take the oxidization off will also take off the bluing finish. for such a small amount, keeping it oiled well will help.
you could try rubbing it with oil and the 0000 st wool, but you'll probably be chasing your tail.
they do make a spot sanding pen, that we used to use in the bodyshop that worked very well for very small spots of rust. ill see if I can find the info and post it here for you
>>
File: KTI-70550__70049.jpg (30 KB, 500x500)
30 KB JPG
>>65631879
>>65632223
yep, they still use them.
if you search for "spot sanding pen" you will get tons of hits. it used a fiberglass insert about 3/16 if an inch in diameter. works great and you can angle cut them with a razor blade for those tight spots in the low crown stamping channels.
the pen has refill tips, as the glass gets used up pretty fast.
hope that helps.
>>
>>65632223
>>65632239
Thanks, will keep an eye on these. So long as I can keep the rust under control I'm not too bothered. The bluing all eventually rubs off that area anyway
>>
File: 20261104_180704.jpg (218 KB, 2040x371)
218 KB JPG
>>65630605
The stock and rear handguard are beat up and heavily cosmolined, while the front hadguard is bone dry
People on the forums say that when you install a GI barrel everything tends to "just werk" when it comes to timing and headspacing, hopefully I'll be lucky
>>
File: 20261104_181343.jpg (485 KB, 1600x1200)
485 KB JPG
>>65632788
Here's this bullshit
>>
File: 20261104_181539.jpg (786 KB, 1600x1200)
786 KB JPG
>>65632790
>>
>>65632790
That's from a "demilled" drill rifle. They had welds to prevent disassembly and replacement with live parts.
>>
>>65632798
Okay makes sense. I guess apex is getting parts from the same place that the CMP is getting their reclaim rifles from
>>
File: 231131131.jpg (29 KB, 522x383)
29 KB JPG
ok /msg/ bros, which of your surps is your pic related?
>>
>>65633262
I'm afraid I don't understand the reference, I know it's obviously the Simpsons but I never got into it (just not a fan of anything Matt Groening made)
>>
>>65633272
https://www.youtube.com/watch?v=YkFr2Sw_hEg
>>
File: 20261024_105348.jpg (3.77 MB, 4624x3468)
3.77 MB JPG
>>65605780
for 3 yeara i barely hit the target with my sks
till i put it in the rifle rest
now its 1-2" groups all day
is it me or russia cannot ergonomy?
>>
File: 20260203_200945.jpg (2.15 MB, 3922x2221)
2.15 MB JPG
>>65631879
the swiss army handbook for k31 says to always oil rust specks till they turn dark/black, but leave it elsewise.
which is a good advice because it keeps oxogen away and thus prevents further growth of the rust.

copper whool from moonshiners or a brass / bronze brush for spark plugs (no brass coverd steel!) or the Dewey bronze bore brushes will scratch the rust off but not the blueing.

is this stg44 a repro or og?
>>
>>65633262
My carcano cavalry carbine. Has trouble feeding the last round regardless of what kind of clips I use, cant hit shit, action rougher than square wooden wheels on a gravel road. But its just such a neat little thing.
>>
>>65633411
It's the manlet length stock mostly I think
If my friend ever digs his SKS out of the closet again I'm going to suggest a limb saver or something so we can actually hit shit with it
>>
I just need run with that uniform :$
>>
>>65633426
Its a reproduction from DK/SSD. Well worth the pricetag, it just loves to rust. My K31 on the other hand refuses to rust.
>>
>>65633411
You're just a bad shot.
>>
Maybe you guys have some advice for this anon
>>>65635046
>>
>>65634030
Not him but for me the SKS front sight always appears blurry for some reason. I don't get this with the Vz. 58 for example, even though the sights are fairly similar
>>
>>65635211
Maybe theres dust or cosmoline still in there
>>
>>65633426
>the swiss army handbook for k31 says to always oil rust specks till they turn dark/black
The only lubricant mentioned in the K31 manual is grease

t. Owns a copy
>>
File: 1684110393630847.png (1.35 MB, 822x758)
1.35 MB PNG
>>65630041
Same anon here, new tale of fuck-ups
>order rifle from another shop
>arrives at my local type 1 FFL last friday
>except not really, wrong gun got sent
>get email saying my gun would be sent out in the next few days
>cut to today, no updates so I send an email asking what's going on
>they're waiting on the other gun to get sent back before they send mine out
What the fuck
>>
File: IMG_1458.jpg (455 KB, 2000x1500)
455 KB JPG
>>65636157
I've got a tale of a fuck up that'll probably make you feel a bit better about your situations
>order 1903A4 build
>price is a little on the high side for what it is, but want an 03A4 and everywhere else I can find one they're around 6k and would need to buy a scope to get the configuration I want
>listed as having been refurbed professionally with a NOS GI barrel(wound up as a drill rifle somehow)
>get it, don't bother checking much on it beyond detail strip, and take it shooting a week or so later
>cases doing pic related
>check headspace like I should have when I got it, closes on a fucking field gauge
>sent it back under RMA, waiting to hear how they want to make this right after they look at it themselves
Hope they're willing to throw a new barrel on it that doesn't have a gaped chamber, or alternatively refund me, because that thing is a $4k safety hazard
>>
>>65636253
Thats a hardcore headspace fuckup right there. Like did you even need a gauge for that? that looks like you'd have trouble just closing the bolt.
>>
>>65636277
Nah bolt closed just fine, all I got were some cases sticking a bit more than others after firing so I had to work the bolt harder. I count myself lucky it didn't outright explode on me. Over time with throat erosion it probably would though, I do not trust it to be safe with that current barrel
>>
>>65633411
it's you, buddy.
>>
>>65633721
how reliable?

i had a chance to get one like 8 years ago for $10k with 2,000 founds of ammo and I'm still mad I didn't do it
>>
Has anyone ever had experiences with the copper washed soviet 7.62x54r ammo causing your bolt to completely seize up.
Took my M39 to the range yesterday, shot some brass case PPU then went to the copper washed stuff and the first round made my bolt completely stiff, ended up extracting the case and when I looked at it there was a metal scrap going around 1/4th of the case (probably from trying to extract it)
>>
File: K.jpg (135 KB, 1600x1280)
135 KB JPG
>>65636355
As a man of unimaginable culture and refinement beyond the comprehension of mortals, I only shoot soviet or com-bloc spam cam surplus ammo in my nugget. So i have no such issues.
>>
>>65636308
So long as I use good mags it works well. Need a few thousand rounds of ammo
>>
Anyone going to Wanenmacher next week?
>>
>>65638329
Na, but ill have a table in Vegas in January if any of you want to stop by and say hi
>>
just bought a british soldier 95 smock. it feels nice to wear, fuckton of pockets (6) that feels like i can shoplift half of the cigarette stock of my local convenience store and the quality is better compared to newer storebrand outdoor gear. now i got to buy the whole set in woodland dpm to look like a proper bri'ish soldier lmao.
>>
>>65639292
My favorite piece of milsurp clothing I own are probably my pairs of 50s era Australian wool battledress trousers, or my Austrian KAZ03 pants that fit like comfy sweatpants
>>
>>65639292
Shit that reminds me I need to wash my DPM jacket for hunting.
>>
File: 1349371547204.jpg (23 KB, 337x372)
23 KB JPG
>CMP now has paid membership
>>
>>65642523
I'm on the CMP email list too anon
>Bronze Membership:

> priority order processing

>Silver Membership:

> priority order processing

> An increased annual M14 rifle purchase limit of +1, for a total of three per year

>Gold Membership:

> priority order processing

> An increased annual M14 rifle purchase limit of +2, for a total of four per year
So basically they want to satiate boomers lust for scalping/reselling so they make them pay extra for it
I'm ambivalent, I just want 1
>>
>>65642545
Gold: $500 per year (discounted to $300 until dec 31)
Silver: $300 ........ ($150)
Bronze: $100 ........ ($65)
>>
File: 1758155423740836.png (202 KB, 525x753)
202 KB PNG
>>65642554
>auto-renews at full price
I wonder who cooked this scheme up
>>
>>65642643
CMP needs mo' money for dem [civilian marksmanship] programs
But honestly i dont see anything wrong with it. All it does is throttle boomers a bit. I maybe pay for bronze though lol
>>
>>65642523
>>65642545
Wait, you have to have a membership with the CMP to buy one, on top of the other requirement for a shooting club membership?
>>
>>65642686
No. You only need to buy the CMP membership if you want preferential order processing and/or more m14s per year. If youre just going to buy one rack grade H&R with a fiberglass stock i wouldnt bother
>>
>>65642691
I really don't want to reward the CMP for this usury, but I also really want a nice TRW. I didn't see anything on their website, but have you heard about any information on the grades that will be available?
>>
>>65642693
No idea. This is the first m14 related information we've had from them since august
>>
>>65642691
I dont think they'll let you pick the stocks, you never could for the garands, it was just luck of the draw between walnut, birch, or a mix of either
>>
>>65642707
I know the situation with the CMP is different but I always get a little nervous when gun companies that are making something I'm excited for go silent for several months. SNT with those K2s come to mind...
>>
>>65642523
We'd like to thank our members for their continued support, without them this wouldnt be possible
>SleepyJoe4156
>Dodgecharger67
>BassBaitBoy
>PullupyourBootStraps
>Floridatimeshare45
>Namvet69
>[Character Limit Reached]
>TheWifeImIright?
>>
>>65642828
I mean, theyre supposed to have received over 100,000 rifles. Theyre probably working diligently on the semi conversions and I imagine the ATF wants to sign off on every individual rifle before theyre deemed legally acceptable. And theres going to be an insane amount of hype when they do come out, I imagine their website will likely crash on release day. Theyre edging us basically
>>
>>65642545
If I buy the membership can I skip going through all the stupid hoops?
>>
>>65643130
What do you mean? All you need is 4 .jpgs now: passport, drivers license, ccw, and whatever confirmation email the GCA or other club sends you.
Four. JPEGs. To have an M14 shipped to your front DOOR.
Now if this new CMP membership counts as an affiliated club, idk, probably. We'll see.
>>
File: 20261109_155051.jpg (421 KB, 2040x1530)
421 KB JPG
>>65632788
Just got this from FedEx
>>
File: 20261109_155958.jpg (505 KB, 1530x2040)
505 KB JPG
Welds
>>
File: IMG_3213.jpg (688 KB, 3984x700)
688 KB JPG
Won me a rare Izawa Type 99 a few weeks back for under $300 lol.

Seems a lot of stuff is depressed right now, whille everything else is expensive. idk
>>
>>65643551
Its only going to get worse
A milsurp collection is a luxury, those kind of things are the first fat that gets trimmed when shit gets tough
Mosins are going to be sub $200 again, but we wont have the money to waste on them
>>
File: IMG_3218.jpg (1.55 MB, 4147x2764)
1.55 MB JPG
>>65643565
Right now a lot of the common shit is tanking, but the less common stuff is going higher. At least what I see.

I don't see Mosins tanking like that though. Idk what it is about that market, but it never tanks.

Stock was an early stock repurposed for the later style cleaning rod, then repurposed to have no cleaning rod. Been wanting one of these for awhile.
>>
>>65642840
Kek'd over the supremely realistic boomer usernames
>>
>>65643577
What's the point of that? I understand new manufacture late war shit being decontented for ease of production, but why delete that on an already complete rifle?
>>
>>65642523
Being a white American man should be the only "requirement" for CMP guns, not this gay having to be part of a club shit
>>
>>65643603
I dont think the requirements are strict enough actually. It should be much more difficult to buy from the CMP, to filter out whiny bitches like you
>>
>>65643603
If 4 .jpgs and $20 a year is too difficult for you, youre too incompetent for gun ownership
>>
File: IMG_2897.jpg (1.63 MB, 3450x1727)
1.63 MB JPG
>>65643601
It wasn't a completed rifle. The stock was mostly completed but was left around unused for whatever reason. Probably some quality issue on the stock. They later fixed up the stock a year or so later.

So it goes like this:
>stock made for an early rifle with the long cleaning rod
>issue with the stock holds it back
>they later fix it up to be used with the shorter cleaning rod
>by the time they got around to using it they weren't making rifles with cleaning rods
>just plug the hole and send it out

I have other rifles that used formerly rejected stocks too.
>>
>>65643603
imagine being so retarded that the CMP process filters you.
>>
File: 20261109_171456.jpg (818 KB, 2040x1530)
818 KB JPG
>>65643633
Okay thats interesting. I like little details like that. My 1917 sestroryetsk has both the wood cross bolt and the metal one, and has a replacement front end added by the finns
>>
>>65642545
>no information on if M14 sales are gonna happen to ban state residents
Give me something to look forward to for 2027, there's no M1 Garands left as it is.
>>
>>65644968
Unless the M14 is specifically banned by name i dont see why they couldnt send one to you if they can send a Garand to you
>>
>>65644968
Oh wait nvm. Detachable magazine + bayonet lug + flash hider = haram. You're probably fucked, maybe the cmp with swap out the fsb for ban friendly ones
>>
>>65644968
At this point just buy one of their reclaim rifles. Between the cost of a new stock, chrome lined barrel, sights, etc. and the labor of reactivating and rebuilding, at $1150 they're most likely selling them at a loss, and only make money on the gunbroker auctions
>>
How much should I ask for my M39 Sako FinNugget? It's in decent shape with a damn good bore. Only bad sports are some buggering on the top of the bolt that hasn't continued eating away.
>>
>>65645881
To a boomer? $1000
To someone younger than you? $500
>>
>>65644968
>none left
They’re literally making more. I’ve seen them on shelves already
>>
>>65645881
Your run of the mill SAKO marked barrel should cost about $700 (Bolt matching)
Stock preferences and plumb coloring might increase value for a specific type of buyer

Price can also jump weather or not its in Mangroves List
>>
File: M1903_M1917_10-28-2020_C.jpg (1.24 MB, 1000x1500)
1.24 MB JPG
>>
>>65645881
$1500 no lowballers no tire kickers you know what you got rifle is getting thrown in a lake if it doesn't sell
>>
>send in form for a C&R
>ATF charged me $30 today
IT'S HAPPENING
>>
>>65649368
Nice. Do you srill have to do an interview for that?
>>
>>65649680
You had to do an interview for C&R? I had mine for 9 years and never had to do one.
>>
>>65649680
>>65649754
I don't think even sending a letter to your local CLEO is required anymore
>>
>>65649680
>interview for that?
An interview isnt part of the application or renewal process. Are you thinking of maybe something else or a state requirement?
>>
File: 1774228625968321.png (783 KB, 1080x1080)
783 KB PNG
>>
>>65652921
Thanks, but I'll wait for "Pappy" the F6F to bring me a carton of Luckies, a S&W "Victory", last week's "Saturday Evening Post" and an Indian Scout.
>>
File: Why on earth.jpg (81 KB, 494x504)
81 KB JPG
>No more room for guns
>I finally have enough
>Proceeds to buy a Polish rework Berthier
Jesus, I becoming a hoarder aren't I?
>>
>>65652921
you had me at shattered skies
>>
File: IMG_3134.jpg (2.14 MB, 4147x2764)
2.14 MB JPG
>>65653477
>Jesus, I becoming a hoarder aren't I?
What's wrong with that?

I also recently got a Polish reworked Berthier. They are hard to find without being sanded to shit and a complete mismatch because most were sent to Spanish republicans.
>>
File: 321211.jpg (139 KB, 1009x589)
139 KB JPG
>>65653477
I literally just got back from ordering another safe from based as fuck safe store around here. It never ends, embrace it.
>>
File: Yugo family.jpg (690 KB, 1828x912)
690 KB JPG
>>65653603
>>65653680
>You know you start collecting firearms to keep your sanity, and another comes along along the way, just one more.
>And one day you look back at your collection it's 50+ rifles, 50+ ANON!
That said I have nothing against collecting especially useful items. But it seems like I finally got my last white whale, another pops up a few months later. And here I thought the M48 Balkan sniper would be my last for this year and the Polish Berthier pops up on my radar, it's like someone is pushing to keep going.
That said collecting Milsurps gives me little glitters hope, that being 29 years old I at least own something. And it's not something retarded like Funko Pops. Aside I do collect other stuff.
>>
Found an NDM-85 for sale at a good price, problem is, its missing the bolt head. It seems like a near unobtanium part
>>
>>65653935
It's only useful if you use it for its intended purpose (killing human beings)
Otherwise gun collecting past the essentials is no different than buying funko pops or postage stamps
>>
File: 11.jpg (449 KB, 1800x1197)
449 KB JPG
>>65653950
Is it a good enough deal to pay a machinist to make a new bolt for you?
>>
>>65653962
>>65653950
Wouldn't do it, SVD boltheads are usually matched to the gun and getting the right headspace with a new one would be difficult. There's a reason for why its cheap if its being sold without the bolt. Spare parts are nearly nonexistent
>>
File: gomb49z3pfwd1.png (468 KB, 709x900)
468 KB PNG
>>65653975
If you're making one from scratch you can intentionally make the bolt face depression shallow and take a couple thousandths off at a time until it headspaces.
Lap the bolt lugs too for good contact.
Essentially, with a mill and lathe, you can do anything you want.
>>
File: tupperware.jpg (362 KB, 599x1304)
362 KB JPG
Looks out of place between all the wood&blued steel guns, but it is also milsurp. Ex Malaysian army AUG, locally made under licence. Unlike Austrian ones has no provision to convert to left-handed use (has no ejection port on the left). Trigger ain't nearly as horrible as /k/ would make you believe.

>>65626857
>>65626862
Anon, are starting insurgency on Endor?
>>
File: 1781560471209516.png (2.84 MB, 2160x2966)
2.84 MB PNG
>>65652963
I was bored.
>>
>>65605125
>I lost 60lbs
damn good
>>
Turning 21 soon, what surp should I look at around ~$600 for my first handgun purchase? I dig revolvers of any kind, and I'm a little autistic about .32
LGS has an Enfield no.2 for 400, is that a decent offer?
>>
>>65656601
Makarov is my answer
>>
File: CGH 1892 Kar88.jpg (1.62 MB, 1247x4000)
1.62 MB JPG
>Deer season starts this upcoming Saturday
>Now gotta figure out what surp I'm taking hunting with me
I think I'm going to take my Kar 88 out as my short range/deer drive rifle. Some of the swamps get so thick where I hunt that you'd be lucky to get a 50 yd shot. I'd love to get a G33/40 or Krag carbine, would be the ultimate woods gun where I go hunting.
>>
File: 313133.jpg (321 KB, 800x600)
321 KB JPG
>>65654319
>Anon, are starting insurgency on Endor?
n....no
>>
>>65657074
>when the trees start saying “Yub nub!”
>>
>>65657074
>>65626857
>>65626862
based forest dweller
>>
File: 1764731641192975.png (119 KB, 711x600)
119 KB PNG
CMP M14 update
>>
>>65661931
I want pictures dammit



[Advertise on 4chan]

Delete Post: [File Only] Style:
[Disable Mobile View / Use Desktop Site]

[Enable Mobile View / Use Mobile Site]

All trademarks and copyrights on this page are owned by their respective parties. Images uploaded are the responsibility of the Poster. Comments are owned by the Poster.