I was going to pick up one of these are they gtg? the psa name attached to this gives me the ick
Throw yourself in front of a train.
>>65648911What’s causing today’s meltdown champ
>>65648912That’s the only way you’ll ever train.
>>65648915>lightning wit of the third worldI’m not sure if I’m talking to a literal retard or an ESL that just discovered that English words can sometimes have two meanings. In any case fuck off esl retard
Are they still doing F marked FSBs for .750 barrel profiles?
fuck yamuddafuck youse all
>>65648907I got one and it had to go back for warranty. Gas port was under drilled and had a step, so carbon built up where it couldn't be cleaned and about ~500rds in it started short stroking with everything. PSA did take care of it and it runs fine now.Authenticity is only so-so. Like the laser printed barrel specs under the handguard. Would have been nice if they could have roll stamped that information instead. It more or less feels like an A1 though so that's good enough for me.I like it, but like with every PSA item shoot it and contact warranty service if it acts up.
>>65648907I was considering picking one up before a found a parts kit instead. I've heard they're fine, but it's PSA, there's bound to be lemons.
>>65648907Just buy an SP1 bro
>>65648907I have a mix of PSA and H&R for a 20". It's fine. Furniture swapped for surplus because commercial repros suck cock and ironically if you buy those parts on their own, basically cost what surplus does except triangle HGs. Swapped upper for no other reason except looks but other than that and the HG the upper is 100% PSA. The lower is 100% H&R except furniture. Strangely gassed well which is nice as I intend on silencing it.>>65649580>Gas port was under drilled and had a stepMaybe I got lucky with my PSA 20" upper lol.>lasered markingsThis kinda annoys me. The "Burst" is weirdly squished in a way I swear would never have happened on A2s. The logo looks fine if you boomer collector white colorfill it. The finish is damn close to 90s Colt, not sure about real H&R.
>>65648907https://theonehorse.com/sarge/if you dont care about the lower/roll markcome with an atrius frt in it
>>65650332H&R and PSA are the same company. You aren't really "mixing" anything
>>65651629>A2 lower>$200 frt makes a $1000 rifle worth $1750 + tax + shipping + tipLol no
>>65649580Roll marking is literally lost technology at this point
>>65649672>SP1>he doesnt own a real onelollmao
>>65651884>charging handle retention catch, spring, pin, AWOL????????Are you posting pics of some deactivated relic?
>>65651919>nooooooooooo you cant shoot your ar without the charging handle catch you will dieeeeeeeeeeelol noguns
>>65648907>are they gtg?Yes. I have one. I love it! They are as good as any other mid tier AR.>the psa name attached to this gives me the ickH&R is owned by PSA but they have the NoDak Spud guys working for them. It's supposed to a separate product line under the PSA banner.H&R is legit. Worse thing I have to say about them is that their A2s have the F marked front sight block (and M4 feed ramps.They work fine, but that's not clone correct) and the grey anodizing can look "off".>>65651850It's the kind of thing I would have fallen for when I was just getting into ARs.>>65651884Does an A1 parts kit count? I still need to put it together.>dat third holejelly
>>65651812Yeah I know that, I actually followed Mike's ARFcom thread about the PSA H&Rs as they were getting ready for production; I'm just clarifying what part is made in what part of the company. The lower for the most part doesn't matter anyways (not that companies don't find ways, look at SOTAR videos), so I'm mostly talking about how decent the regular PSA uppers are minus the bolt. I shot maybe 50-100 through the original upper before swapping my new one in. Both work fine. Never had an issue, although I'm aware a round count of like 100-200 rounds on the lower and 50-150 on an upper isn't much.
>>65652206>jellyI'm just fucking with you. I'm in Europe and it's a milsurp gun with full auto removed but it's been done so haphazardly it would be extremely easy to revert. If you're retarded enough that is because the giggle switch isn't worth the trouble really.
>>65648907The A2 is awesome. I plan on getting the A1 as well. Great starter rifles for your 20'' gigchad inner awakening. Won a few participation trophies at Washington's Birthday matches with mine.
>>65651812Oh also the flat top upper from PSA was strangely rough and some of the corners were rounded IIRC. The H&R stuff is nicer. But buying said PSA upper was literally cheaper than buying a 20" barrel alone anywhere else. Absolutely nuts how cheap it was.>>65652206Yeah that's basically the only things that are wrong with H&R and it's not a big deal unless you're a cloner that doesn't like non-clone-correct guts. The trigger, pins, bolt catch, mag release (?), and selector are black even on grey guns which apparently isn't technically wrong because some grey guns did get black parts but it is a little silly. The trigger is a slight upgrade from milspec which is nice. Target, no, better for field/hunting, yes. You could go lighter but it's above average.
>>65652227PSA is good to go. The only thing they are "gassey" guns which isn't a bad thing because it will help run suppressors and lower velocity ammo with more reliability.If you still need more proof watch Iraq veteran8888 on YouTube he did a meltdown of a LMT,KAK,and PSA full auto until they failed nonstop they all failed around the same round count. $450-$500 for a reliable AR made in the US is hard to beat
>>65652242It's still cool. I love retro ARs.>giggle switch isn't worth the trouble really.:(Half of the appeal of full auto is the government not wanting you to have it.>>65652252It's "close enough", which is good enough for me.>>65652259My H&R A2 doesn't like the cheap Russian steel case .223. It won't cycle reliable with that.I don't know if that is because of it being a rifle length gas system.That's on me for using garbage ammo.I had a couple of boxes of it lying around and thought to put it to use.
>>65652398It might be the buffer spring,the A2 uses a heavier spring so it might not be getting enough gas to cycle normally. Just use 5.56 since it's higher pressure
>>65652419I normally use 5.56.I had some that shitty steel case .223 that I wanted to use up.That was completely my fault. My rifle deserves better ammunition anyway.
>>65652259I use brass. With greentip, my 20" is literally scraping the bases of the rounds on the brass deflector. Kinda insane how well gassed mine is despite being a $200-some PSA A4 upper.>>65652398Yeah I'm fine with the M4 feed ramps. I'm not so nitpicky that the feedramps need to be an older worse design. I'm putting together a build that should probably have an edgewater buffer. It will have a regular buffer for reliability and cost reasons because I'll never see it and newer buffers are more reliable anyways. Yeah it's an imperfect clone. But it's also a hunting rifle. The different (wrong later style) mill cuts near the buffer IIRC is more annoying than any of the other things. But even that is a tiny detail 99.9% will never notice.>>65652419>A2 uses a heavier springThan the A1? News to me. This is one of those tiny pitfalls that really make your brain hurt when you're trying to learn if true. I've read a lot on M16s and this is the first time I think I've heard that. However, if it's for bolt bounce reasons I understand why as the A2 has a heavier barrel (IIRC SmallArmsSolutions goes over that, another headache of a detail to make guns run smooth if you forget when ordering parts).
>>65652873>Than the A1?Than a carbine. A1/A2 both use "rifle" buffers and springs. The buffers are heavier and the springs have longer travel and IIRC are heavier, so they're very smooth-shooting but one can easily imagine such a setup choking on steel-cased garbage.
gay retard gun for idiots. You're fuckin stupid. A bodyguard 2.0 is more useful. AR15's are overkill loser guns for niggerloving retards. Get a 9mm pistol and a 309 bolt action.
>>65652398>Half of the appeal of full auto is the government not wanting you to have it.I know but with the recent chimp out in Kraków it's not even worth talking about it. Maybe something like FRTs will become legal at some point here but otherwise I'll just stick to my legal guns.
>>65652879>s&w>good
>>65652879at least try to put effort in to bait
>>65648907I built mine up from parts with a brownells barrel and an H&R receiver. Its fine, but the finish is a little off.
>>65652876>A1/A2 both use "rifle" buffers and springs. The buffers are heavier and the springs have longer travel and IIRC are heavier, so they're very smooth-shooting but one can easily imagine such a setup choking on steel-cased garbage.That's almost exclusively what I've shot from my AR, no problems and it's a goofy 18 inch barrel with rifle length gas.
>>65656715The green tape isn't doing its looks any favors
>>65656777Checked and yeah I took it off. I taped it up to disguise the slip ring that I gouged the fuck out of but I have since filed it it down and painted over it and it looks fine now. This was the photo I should have posted lol
>>65656793Slip ring looks looks crap.
>>65656793At least the shade difference between parts is within milspec and does actually represent what someone might have been handed in the service
>>65656803That's what I try to keep in mind too, sometimes I've been tempted to send the thing out to get it reanodized but I think its not worth it. >>65656802It doesn't bother me anymore
>>65656831>sometimes I've been tempted to send the thing out to get it reanodizedThey are $15 new.
>>65656849Not the slipring the whole rifle to get it color matched but that's dumb.
>>65656865That would be dumb. Rifles look way cooler and more legit when none of the parts that are nominally the same color match at all.
>>65656922Yeah I agree. Most of my rifles are milsurps or kit builds with a fair bit of wear which I like. The M16 though looks worse in person, and the lower has a weird texture.
I have a PSA A2 lower and a H&R (for whatever that’s worth) chrome lined A2 upper. Works fine and always spits out lead. Only have had jams sometimes with PSA’s metal mags. Fren’s AR on the left. Spend a bit more on the upper receiver if you’re serious about clooooning but a PSA lower is fine
>>65656995Lol you built the opposite of me. A4 upper, H&R lower. Never used a PSA mag as I have a few Okay 20s I like to use. My first I picked out as the mag I'd use to hunt with like 5 years ago is looking well worn in. Wish I picked more of them up not only before they stopped production but before they stopped using the nice satin moly finish. The matte grey is kinda gross.
>>65656995>>65659516>*PSA A4 upper with an H&R lowerI'm retarded and forgot to specify with the upper. FWIW my rifle was not a PSA until this year but it gives you an idea how many times I'm going to be taking it out and how much it gets used. If there's any problems with either I've yet to see them. Just really wanted a 20".