[a / b / c / d / e / f / g / gif / h / hr / k / m / o / p / s / t / u / v / vg / vm / vmg / vr / vrpg / vst / w / wg] [i / ic] [r9k / s4s / vip] [cm / hm / lgbt / y] [3 / aco / adv / an / bant / biz / cgl / ck / co / diy / fa / fit / gd / hc / his / int / jp / lit / mlp / mu / n / news / out / po / pol / pw / qst / sci / soc / sp / tg / toy / trv / tv / vp / vt / wsg / wsr / x / xs] [Settings] [Search] [Mobile] [Home]
Board
▼ Settings Mobile Home
/o/ - Auto


Thread archived.
You cannot reply anymore.


[Advertise on 4chan]


Alright lads, what rear gear should I run?
Car is 3,100lbs
451rwhp 436rwtq
>>
What rear diff ratios are available for this vehicle?
>>
>>29148110
4.55
>>
File: block layer 3.73 .jpg (464 KB, 1080x1767)
464 KB JPG
>>29148112
3:08
3:42
3:73
4:11
& Something crazy like a 5:18.
>>
we need a power and torque curve to work it out m8
>>
>>29148110
What rpm is peak torque developed? I'd have thought you'd want the shifts to be either side of that
>>
>>29148110
>>29148123
5.18 DO IT NAO
>>
>25 in tire
3.08.
>>
>>29148110
Depends on the application.
Is this a track/race car? If so, what do you want the maximum speed to be?
Is it a drag car? 1/8 mile or 1/4 mile?
Is it a street car? If so, what RPM would you want it to sit at highway cruising speed?
>>
Who gives a shit? It's a street car, literally makes no difference.

>>29148221
Nothing about gearing will change that...
>>
>>29148330
>It's a street car
Was not specified.
>>
>>29148221
Peak torque is at 4,800rpm

>>29148320
50% track
25% autocross
25% casual driving
>>
3.73
>>
>>29148330
>Nothing about gearing will change that...
Put in taller gearing
Revs are lowered when the shift happens
6th becomes overdrive
Vmax in 5th
Simples
>>
>>29148485
Seconding this
>>
>>29148110
Why do you have 2 over drives?
>>
>>29149593
some 6 speeds have that
>>
>>29148485
correct answer
>>
>>29148221
Wrenchlet, it's about peak power not torque
>>
>>29149803
my dick peaked in your mom, if you can understand my meaning?
>>
>>29149803
It is, at one end of the change. But if changing up to the next ratio drops the engine RPM well below peak torque then the engine will bog down.
It's easy to demonstrate this; change into 6th at 30 mph and try to accelerate - the peak power your engine (you do have a car?) will eventually reach is unchanged - you'll just need an egg-timer to get there. Why? Too far down the torque curve.

Oh, and
power = torque x rotational speed.
It's all about torque - motorsports even talk about "torque demand" rather than power



[Advertise on 4chan]

Delete Post: [File Only] Style:
[Disable Mobile View / Use Desktop Site]

[Enable Mobile View / Use Mobile Site]

All trademarks and copyrights on this page are owned by their respective parties. Images uploaded are the responsibility of the Poster. Comments are owned by the Poster.