[a / b / c / d / e / f / g / gif / h / hr / k / m / o / p / s / t / u / v / vg / vm / vmg / vr / vrpg / vst / w / wg] [i / ic] [r9k / s4s / vip] [cm / hm / lgbt / y] [3 / aco / adv / an / bant / biz / cgl / ck / co / diy / fa / fit / gd / hc / his / int / jp / lit / mlp / mu / n / news / out / po / pol / pw / qst / sci / soc / sp / tg / toy / trv / tv / vp / vt / wsg / wsr / x / xs] [Settings] [Search] [Mobile] [Home]
Board
▼ Settings Mobile Home
/tg/ - Traditional Games


Thread archived.
You cannot reply anymore.


[Advertise on 4chan]


Work in Progress, "RIP Aly Morrison" Edition

>Full-on /WIP/ OP Links Pastebin:
https://pastebin.com/BE42AEcD

>WIP Tutorial Images Mega
https://mega.nz/#F!TvQFCaLb!w8WZKCcOsTRasxrI0JWezw

>Saint Duncan's "Six Things I Wish I Knew When I Started Painting"
https://www.youtube.com/watch?v=ufP8ka3KGno

>Saint Duncan also explains thinning your paints
https://www.youtube.com/watch?v=wxWgsqSf74s

>Paint thinning 102
https://www.youtube.com/watch?v=sBDVPoNXyVI

>4 EASY Chipping Tricks For Beginners
https://www.youtube.com/watch?v=ku4comhKHJM

>Decal Like a Pro
https://www.youtube.com/watch?v=SYKLiEW7p9c

>How to Edge Highlight
https://www.youtube.com/watch?v=KoRbYuAfbEk

>How to use contrast style paints
https://www.youtube.com/watch?v=IhholrozptI

>How to Paint with Tremors
https://www.youtube.com/watch?v=oqp76vAJu9g

>Airbrush Priming and Thinning
https://www.youtube.com/watch?v=jkntrSBvXxE
https://www.youtube.com/watch?v=IGjBQzoukFg
https://www.youtube.com/watch?v=00JVUxABe44
https://www.youtube.com/watch?v=AEqT_R41JX8

>I've been in every day, buying so much vinyl
>Don't even own my own turntable
https://www.youtube.com/watch?v=IdEemz-gFZ4

>Who's Johnny, she'd say, and smile in her special way
https://1d6chan.miraheze.org/wiki/Johnny

>Previous threads:
>>98935343
>>98918577
>>98895782
>>
WIP Secret Santa 2026 is underway!

>Questions, problems, comments, suggestions
cmVsb2FkaW5nYmVla2VlQGdtYWlsLmNvbQ==
>>
I did a little green stuff work yesterday and kept everything lubed with moisturizer. I assume I now have to clean it off the model. Will a gentle toothbrushing work or will there still be oils from the lotion on the plastic unless I do more?
>>
>>98951061
soap, water, light scrub
>>
File: orksontable.jpg (820 KB, 3191x2373)
820 KB JPG
Finished these Orks a couple of weeks ago, working on more this week with lots of conversions to help fight the limited posing of the Armageddon stuff
>>
>>98951369
They look awesome, Juan, just like always.
>>
>>98951061
Pro tip, real mini sculptors use the grease from the side of their nose.
>>
>>98950920
>>98947197
I tend to send questions to see what my giftee is also into, it doesn't hurt to ask.
>>
File: 20261112_162801.jpg (331 KB, 1495x1265)
331 KB JPG
I wanna get this painted up for tanksgiving. I'm gonna try to do more weathering than usual.
>>
>>98951369
Those are some fine looking orks, Anon.
>>
File: 20261112_212532.jpg (655 KB, 1934x1526)
655 KB JPG
>>98950920
Alright WIP i got a box in the mail today. What do we think it is?
>>
>>98951996
Something from Scalecreep... I'm totally going to fail by being too specific. 28mm Thirty Years' War?
>>
File: 20261112_212539.jpg (1.63 MB, 2810x1860)
1.63 MB JPG
>>98952018
Not quite. Here's the back (which is totally misleading).
>>
File: desire_to_know_more.jpg (86 KB, 640x512)
86 KB JPG
>>98952047
>Starship Troopers
>>
It's 26 dwars.
8 with rifles
4 with crossbows
8 with long axes (or short halberds)
6 command figures, one of which will 100% be promoted to a named characther with name and backstory.
>>
File: 20261112_214947.jpg (1.54 MB, 3470x1609)
1.54 MB JPG
>>98952073
>>98952072
>>98952018
And i forgot the picture...
>>
>>98952047
>No, but here, have something that won't help you at all and might lead you astray
T-thanks, Anon
>>
>>98952073
Oh, cool. They have that old school Citadel look and feel. I miss those medieval looking dwarves.
>>
File: 20261112_221104.jpg (1.13 MB, 1860x2343)
1.13 MB JPG
>>98952095
Sorry anon, i never got miniatures packaged in a box originally meant for some other, completely unrelated, miniatures and was excited to share.

These will go well with another batch of same and similar dwarfs i got recently from a forum member in the UK (pic related).
That's 24 dwarfs+ a cannon + 2 santas (which are basically just taller dwarfs)+ some sort of female witch dwarf.

I also have an handful of dwarfs i got from scalecreep over a decade ago in my backlog.
In total that's less than 60 miniatures so I'm going to try and slot them in my next year's painting goal. I'd like to have at least the riflemen and the crossbow dwarfs painted and based.
It should be doable and it's something im actually looking forward to.
>>
>>98952079
don't worry about standing them up or orienting them right
>>
File: IMG_20261112_223328.jpg (349 KB, 3060x4080)
349 KB JPG
Corsair progress shot
Debating on making the fusion pistol body gold, might not be worth the effort though
The pink on the arm band might also be too much, it's supposed to match the cape but I tried to give it highlights and might've gone too high
>>
>>98951369
Noice.
>>
File: 163.jpg (485 KB, 4096x3072)
485 KB JPG
Did some scatter terrain today before it got too hot to keep working. I miss winter. Probably subconsciously dwelling on it considering what I made today. Was pleasantly surprised at how nice CA glue plus bicarb soda and some low opacity paint looks.
>>
File: 164.jpg (400 KB, 4096x3072)
400 KB JPG
>>98952444
>>
File: 165.jpg (379 KB, 4096x3072)
379 KB JPG
>>98952445
Both of these will sit on the healing bench for a day so I can decide whether I feel like they're done or if they need something more.
>>
>>98951746
Nice firework machine

>>98952415
Looking good, anon.
The armband does stand out a lot compared to the cape. Maybe if you make the pink of the cape brighter while leaving the shadowed area as dark?
>>
>>98952141
Nice throng of dwarfs anon, which will you start painting first?
>>98951996
A barcode that still has an unaltered section along the entire width like yours has on top, is still readable. To scramble them, make sure at least some part of the width is fully blocked out.
>>
>>98952415
It looks great so far!
Personally I would change the armband to match the blue sash. Gold is a good choice, it will help tie in the trim on the boots and buckles.
>>
>>98951996
>>98952568
Instead of using a mosaic/draw tool it's also preferable to simply select the region of the image and then straight up delete it. Mosaic paint tools can be easily undone by editors.
>>
File: Ass cannon Slaanesh.jpg (1.28 MB, 2220x876)
1.28 MB JPG
Another new creation coming in.
After the great results I got with the Tzeentch chaos dwarf ass cannon (>>98940455) I decided to design a Slaanesh one.
Now let me tell you I went through some crazy and hilarious iterations with this one but ultimately pulled back on the design to be more tame, lore friendly and overall tasteful on the table.

I still went with a mostly naked model with added grafted mechanical legs because of the chorf lord who also has mechanical legs, I thought it would be a nice callback and it shows how chorfs would "repair" a damaged ass cannon.

Probably my best design yet, I'm getting better at this.
>>
remember, do not feed him (You)s
>>
File: Ass cannon Slaanesh p.jpg (527 KB, 1911x831)
527 KB JPG
>>98952826
And the printed and painted version. I kind of fucked up the support and had some minor print errors but I'm still pretty happy with the final results.

I must say, it feels pretty amazing to make a cool many from conception to painted print in a matter of hours. The future of the hobby is bright.

Nurgle ass cannon next maybe
>>
>>98952831
>>98952831
>>98952831
>>98952831
>>
>>98952831
A thousand times yes.
>>
>>98952831
This. And ignore the pat on the back samefagging that will inherently come soon.
>>
>>98952832
Here's an example of an iteration I was very close to printing. That face made laugh for way too long.

By the way you gotta space your posts a bit more anon. Also,
>instant reply
Holy terminally online.
>>
File: KT Exo Marker-3.jpg (2.31 MB, 1875x2500)
2.31 MB JPG
>>98951369
They look great. I like how gritty you made them look. Very brutal.
I hope the beast snaggas I'm starting on today will look just as good.

I finished the last three Exodite buildings today and moving on to the minis today. I still have some more buildings I need to do to complete a 4 player Kill Team table, but the first batch of terrain I got is done now. I really like working on terrain, but I'm fucking itching to paint some minis instead.
>>
>>98952882
Soul.
>>
File: KT Exo Marker-4.jpg (2.07 MB, 1715x2500)
2.07 MB JPG
>>98952882
Here's one of the two larger buildings. The last one is a little different, but very similar so I won't post it and hog the thread up with my shit.

The Exodite buildings remind me a bit of the forerunner architecture in Halo and I think they would look really cool painted in the same shiny chrome style. I'll probably do something like that if I ever do more Exodite terrain, but I'm set with using the five pieces I have now for objective markers.
>>
File: 1770195652526.jpg (238 KB, 1296x1920)
238 KB JPG
Purple Sisters anon here. I got Celestine awhile ago and am planning on painting her soon. I don't want her attached to the base with the scrolls and was thinking of a more angelic route like her descending from parting clouds (sorta like in picrel) or flying infront of a stained glass window. Any suggestion on what material works best and is durable to make clouds and what kind of paint for stained glass?
>>
>>98951369
Sweet, how did you do the bases?
>>
>>98952568
>>98952753
I didn't know. Thanks anons.


On the painting side, it depends on how I end up setting up my painting plan. If i decide i just want to get all of artillery painted, I'll do the cannon and crew first.
If instead i decide to create an independent army/contingent within my collection, then I'd probably start with the riflemen.
>>
>>98952949
Deadlyprintstudio do clouds that could work with what you're describing, either as physical parts or 3D print files you could use with (semi-)transparent resin, if that works for you
>>
>>98952895
these are sick. base, sponge, thin line?
>>
>>98952949
You're probably best off using some sort of transparent paint like an ink or contrast paint over a clear resin bit for stained glass. No clue on the clouds tho. GL anon
>>
>>98952949
i remember an old school project i did as a kid with clear school glue, then mixing colors into it to make a fake stained glass.
if you 're going odd, you could also look into jelly nail polish, it gives that glass color look.

ive seen clouds with cotton balls that look good. then, wire through them to connect to Celestine?
>>
>>98953361
Thanks, I could have spent more time on them, but I've run out of patience and just wanted to get to the minis. But like I mentioned before, I think bigger terrain pieces actually look better and more real if you don't do stuff like edge highlighting.

But yeah, basecoat, sponge two layers dark jade (use a brush for the tight spots), then splash some areas with a heavily watered down turquoise (I use Scale 75 Caribbean Blue (which has become my favourite colour)).
I then do a very thin glaze of Scale 75 Despair Green (very close to the pro acryl dark jade basecoat, but ever so slightly bluer. It works amazing as a glaze over various greens) over the whole thing.
Then I do the Gamer Grass technique from a marble tutorial they have where you use two brushes, one for doing lines of fairly watered down paint, and then one clean but wet brush you use to make the line as thin as you want it and feather it out a bit. Using the same Caribbean blue as before.
Then I do another ultra thin glaze of Despair Green to bring it all together, make it more saturated and bring the brightness of the caribbean blue down a bit.

Could probably get away with skipping a few steps, but I'm fucking painfully slow and dumb at painting.
>>
>>98952826
>>98952832
The wooden bases for these are a bit confusing and seem like it would look very out of place in formation or on the battlefield, do you have any pictures of one on the table to see how it looks?
Is the rest of the army all hanging out in a tavern? I don't get it.
>>
>>98953849
Don't respond to the subhuman.
>>
File: OIP-1507448142.jpg (46 KB, 474x318)
46 KB JPG
>>98953849
Early medieval cannons were often seen on static wooden bases, easier to manage recoil that way probably.

>>98953869
Chill spreg, you're gonna catch another 3day.
>>
>>98953869
I'll respond to whoever the fuck I want.
>>
>>98953744
i think you could go either way, speed it up or go high effort, but what you have is the right level. It reads as marble, it'll enhance the table.
I don't do much terrain. seeing this though, i want to give it a try
>>
>>98953915
Neat. Then it needs a more robustly built frame and some sort of hitch or ring or bars on the sides slaves/monsters can garb onto and haul it around. As is it looks like a tavern floor and doesn't work well for what you're trying to represent.
>>
File: 1794272088740813.png (582 KB, 750x697)
582 KB PNG
>>98953925
Yeah that's because it's directly taken from the original GW mini. I agree it'd look better with some kind of scaffold or something but that would also be much more annoying to paint.
>>
File: noise_sister_wip.jpg (312 KB, 934x1300)
312 KB JPG
Making progress on my slaanesh sister. Only the sister herself and the base to finish
>>
>>98953934
Could do a base like a movement tray with the frame so you can put whichever variety of cannon you're fielding in as needed.
>>
>>98953869
it's highely likely samefagging, just hide and ignore
>>
>>98953951
Not a bad idea.
>>
>>98953946
This looks pretty sick.
What are they playing?
>>
>>98953986
https://www.youtube.com/watch?v=TiVIFMbwxOc
>>
File: IMG_20261113_190148.jpg (1.84 MB, 3638x2464)
1.84 MB JPG
I bought a 1:48 t-55 and I'm in the process of making it more sci-fi. This is my mock-up of a potential main gun, what do you think? The rings would obviously painted like they are some bright energy weapons and the tank will have ERA bricks.
>>
File: images.jpg (37 KB, 596x335)
37 KB JPG
>>98954000
>actual Tesla Tank
Checked. Would definitely plant some extra powerplant/battery to the back, where exhausts are.
>>
>>98954011

I think there's a scale model of that also on the market...
>>
>>98954024
Yeah, there is. Still conflicted between buying it or making my own Tesla Tank in the future.
>>
>>98954031

It wasn't that expensive if I recall correctly, but these Tamiya models are dirt cheap and it was really simple to put together, even the tracks. The Tesla tank was also in 1/35 scale, so a bit too big in my opinion.
>>
File: IMG_20261113_205639~2.jpg (700 KB, 2157x1526)
700 KB JPG
Little progress from yesterday, mostly gold to samurai (according to bio, it's actually a girl. Somehow). At one hand I wonder if I didn't overdo the bing but then again, Japanese LOVED the bling, based on what I saw in museum.
>>
File: Carl the chorf3.jpg (410 KB, 1760x957)
410 KB JPG
I GROW STRONGER EVERY MINUTE

I CANNOT BE STOPPED
>>
File: 20261113_153126.jpg (1.11 MB, 3280x2460)
1.11 MB JPG
Finished the first half of my death company
>>
>>98954645
kino. Love the weathering.
>>
>>98954637
none 'a this matters
>>
>>98954680
Well yeah they're plastic toy soldiers.

Now what will I make next?
>>
>>98952141
Anon, you must tell me where you got those.
t. looking formetal dorfs
>>
>>98954645
I love the matte look. Is it the varnish or the paint?
>>
>>98954711
Almost entirely the varnish, AK ultra matt has some hands
>>
File: ptak.png (4.84 MB, 3446x1805)
4.84 MB PNG
done with base for my kroot.
>>
>>98954705
Your question has two answers.
1) How I personally obtained them.
I got some of them on Lead Adventure Forum, a member was selling them off in the UK from his personal collection and i have a friends who does hack and forth between Canada and the UK so i used his adress to avoid international shipping. The rest are from ScaleCreep miniatures who was the North American distributor for Black Hat miniatures. A few ago i saw that scaleCreep was discontinuing their fantasy range, so i messaged them directly asking for a good deal if i got all of their remaining dwarf inventory.

2)How you can get them yourself.
This depends on where you're located and if you're looking specifically for these exact models or just more generic "old school" metal dwarfs. Answer me this and i can provide a more detailed response.

T
t. Owner of thousands of metal dorfs.
>>
File: IMG_20261113_235140.jpg (1.64 MB, 3322x2246)
1.64 MB JPG
>>98954000

Update on the tank. Still did not glue the gun, but added the ERA bricks.
>>
>>98955052
I just like new old school stuff.
Answering to the 2) - Canada.
>>
>>98955078
bruh it's great that you are enthusiastic about your work but please look up what the shit you are trying to model actually looks like.
>>
>>98953922
I'm just a really slow painter, but painting stuff that's this big also takes time.
The marble effect is actually a very fast technique because you're working with watered down paints than you're feathering out, and you need to do it pretty quick and keep the paint at a specific consistency or it'll dry in the sort of paint perimeter before you can feather it properly.
But it's like no matter how fast or good I try to paint I always paint at the same speed and end up with a roughly similar result.
I painted for five hours today and while I did make progress, I was hoping to block in two or three colours for the slap chop I'm doing on the beast snaggas, but I only got the pink/purple down. I did manage to do it on all 18 orks and grots, but still. I was hoping I would be faster, especially when it's contrast paints and shit. But the end result will be better if you spend more time at this stage for slap chop, so it's ok. I just want to start playing the game with my mates already. Kill Team looks like a lot of fun.
>>
>>98954645
>"What are you? Casul?"
>>
>>98955118
Ah, no way! I'm also in Canada, whereabouts? If we're close enough we could actually do a large order together to split shipping.
To better answer you then you're mostly looking at american casters or stockists. There's very few canadian stores carrying non GW dwarfs.

>Old glory miniatures
Old school dwarfs + some early 2000's Dwarf Wars ranges. I really like these dwarfs but shipping and tariffs are actively scaring me off from ordering them. I have a "wish" order north of $1000 that i can't ever make myself go through with.

>Viking Forge miniatures
REALLY old school dwarfs, somewhat limited range but very aggressively priced.

>Black Tree Design
These guys used to be my go to supplier of classic looking metal dwarfs. They used to be extremely cheap and have tons of varied sculpts.
Their new range is somewhat diminished (lacking some infantry and their classic artillery) but they're still a good source of pewter miniatures for decent prices (wait for one of their periodical sales though).

>IronWind Metals
They're the successor of RalPartha; as such they have a lot of old dwarf still in production. Some sculpts are very DnDesque

>Reapers
Mostly characters, very little in terms od ranks and files, but they've got some great sculpts and a very large selections.

these are the main 5 US metal dwarfs manufacturer. There's a plethora more if we include plastic/resin and expand to the UK and Europe. I might do a post just for that.
>>
File: IMG_20261113_180013.jpg (172 KB, 1842x2456)
172 KB JPG
Corsair basically done, just needs varnish and finishing the feather cape on the back
>random dots appeared on the cape
god damn it
>>
>>98951888
>>98952435
>>98951417
Thanks, I'm very happy with them
>>98952882
Thank you, I bought a Snagga sprue recently which will provide a nice assortment of options for the conversion pot. I am having a lot of fun blending the kits together
>>98953247
I deliberately wanted to keep the bases barren and desaturated to help sell the green and yellow. They are mostly AK Corrosion texture - I thin this with water and push it around. Some bits of slate here and there. I am doing a lot of work with Milliput at the moment so it's worth mentioning - if I mix up to much I use any excess to create rocks, bumps and slopes on bases. Painting wise it's just a medium grey brown drybrushed with a lighter grey brown. Add a little pigment powder to taste.
>>
>>98955379
intentionally harlock-esque?
>random dots
the fucking worst
>>
>>98955373
>>Black Tree Design
never order anything from these cunts, they will take your money and ignore you. Their dreadful reputation is deserved
>>
>>98953279
I'm really considering going this route. I would have to convert whatever I got regardless but they have some really good sculpts.
>>98953364
Thanks!
>>98953405
>i remember an old school project i did as a kid with clear school glue, then mixing colors into it to make a fake stained glass.
I'm going to look into this because it sounds like a fun process, thanks!
>ive seen clouds with cotton balls that look good.
My only issue with it is I feel that cotton would just get dirty and stained over time even after hardening it.
>>
>>98955545
Nope
>harlock
Dang this looks cool, space pirates are the best
>>
>>98955373
Vancouver.
Awesome, man. Thank you!

There's also Bogwyrm minis, they've done two crowdfunded castings. Metal chorfs and metal hobgoblins. Very neat sculpts - Fabelzel's lineup that they expanded in the same style. Worth following if you like retro-looking stuff.
>>
>>98955577
cosairs are space pirates so i thought you were leaning on the patterning
its a great show, if you like that kind of thing
one more question, what mini is this? i dont recognize it from the regular range.
>>
>>98955052
>t. Owner of thousands of metal dorfs
Let's see them
>>
>>98955078
Lol this guy
It's like ork versions of other armies
>>
Tom from WA, could you please check your E-mail? I sent you a question about Secret Santa.
>>
>>98955762
Good timing
I got your email but there's no question, I'll prob send the package next week and I'll send you a tracking no. and pic.
>>
>>98955762
Sorry my bad, yeah tell him not to buy me anything, just send me something he doesn't want anymore, I don't mind any range, primaris, CSM, tyraninds, just send something small as I'm getting out the hobby and downsizing, ask him if he wants old clanrats btw or recast (top quality) eldar
>>
>>98955078
hes fukkin baaack. is it a shit post?is it genuine effort? doesnt matter, its quality either way
>>
>>98955762
Or if he has a airbrush
>>
>>98955694
Looks cool, will add it to the list
Corsair voidscarred, headswapped with the wych fishbowl helmets
Those and the venom pilot helmets are what I'm using for the team, looks way cooler and more mysterious than the normal helmets
>>
>>98955550
I think they have 2 offices: one in the states and an uk one. I can't speak for their european caster; but i have ordered from them multiple times and never had issues with delivery here in Canada.

Granted, my last order was in 2014 and I'm just a single anon so take that as you will

>>98955621
I'm unfortunately in shitty Toronto (and still can't find local players for anything less mainstream than "current GW edition").
I'm well aware of those actually, lovely models indeed if they start making dwarfs, I'm in trouble.
>>
>>98955817
If you're sending to a guy in qld recast eldar is fine. I do have an airbrush, iwata neo and a cheap generic for my base coating.

Scrap that, santa just emailed me to say we're not swapping, theres a 3rd man.

Shame you're getting out of the hobby mate, but Ill dump some on sprue stuff from the shame pile your way. Are you just chasing stuff to sell?
>>
I am once again in that spot where I want to paint, I KNOW I want to paint, but for some fucking reason I just don't have the will to actually go to the desk and do it. It might be the couple of mostly done projects sitting around that I should finish but I'm afraid of fucking them up. But this pisses me off.
>>
>>98956086
Nah it's a Ukrainian
>>
>>98956157
Yeah it's called not wanting to paint mate, I'll explain it to you; while you can't hobby and are wagieing you use the hobby as escapist fantasy so you can cope with your unsatisfying life/job, you don't want to paint, you want to escape in your mind from what you're doing, and the proof is when you have the time to hobby you don't and instead just relax or kill time
>>
File: 2026114-ork3-4.jpg (2.98 MB, 1904x2128)
2.98 MB JPG
2 more orks. So many details, will need to go back to give the claws a clearer highlight and clean up the seam on the jeans. Also completely missed his bone (?) earring.

>>98954637
AYYY NO FRICKIN WAY

>>98951369
I like that yellow, I need to mix in some yellow pieces into my orks.
>>
>>98952832
This is really cool, you should post the STL too. I'd love to print those.
>>
>>98955166
>look up an actual sci-fi tank
>>
>>98956263
As always, sick as fuck. What formula do you use for the jeans by the way?
>>98955379
Really cool color scheme. Especially dig the mask.
>>
Any feedback for Festus’ slug? I’m thinking it needs more contrast. Either a bright ice yellow spray on top of the slug or maybe some streaking grime since it has so many cracks and folds. I want to accentuate the bumps and bulges and crevices. I’m trying to leverage my airbrush but I can do it all by brush if need be
>>
>>98953946
Wish we got more of this and fewer helmets and skulls on the tactical rubble of the monopose 50 USD model
>>
File: images(15).jpg (53 KB, 527x581)
53 KB JPG
>>98956314
Yeah it's very flat. I'd do both, the brighter mottling on top amd grimly slime at the bottom.
>>
>>98955078
This shit is already miles better than the previous attempt. But again:
1) Why ERA bricks on top of tracks but not where crew is (turret). Instead of side skirts being reactive, why not just add regular armor there?
2) what are the beads for?
Also, if you like reactive armor, anon do yourself a service, and either print actual ERA, or buy it in plastic from Ryefield.
>>
I have recently bought an airbrush and have used it to undercoat, want to use it to paint an army.
Just seeing if this works.
Hit the minis with a dark colour from horizontal and lower angles. Then, hit the with a light colour from the top.
After that's done, paint in all the details.
I have seen it done by others and it works.
Also what do contrast paints do in an air rush? Anything weird or are they ok to use?
>>
>>98956454
Inks are great, give a smooth strong coat of even weak colours
>>
File: fist.jpg (181 KB, 1123x1567)
181 KB JPG
>>98956454
>Also what do contrast paints do in an air rush? Anything weird or are they ok to use?
They can serve as impromptu filters (to tint surfaces). You can also use pre-shading and contrasts, that is basing the mini black, then painting all the light surfaces with white, and then spraying thin layer of contrast paint over it to make it whatever color you want, picrel.
>>
>>98956454
Some people use contrast paints as a regular airbrush-ready basecoat paint, but each time I've tried it, the coat seems to flake off in spots when compared to thinned-down or dedicated acrylic airbrush paints.
>>
>>98956314
You are not a painter. You are a fucking airbrushlet. You have no brush control, no edge control, no understanding of layering, no understanding of paint consistency. You are a glorified spray-can operator. You don't know how to blend, you don't know how to glaze, you don't know how to wet blend. You point your little airbrush at a miniature and pull the trigger like a fucking child with a garden hose. You think you're an artist because you can spray a smooth gradient onto a Space Marine shoulder pad? Get the fuck out of here. You don't paint. You spray. You have never experienced the joy of painstakingly layering 15 progressively lighter shades onto a 28mm face. You have never suffered through edge highlighting 40 fucking purity seals. You have never spent 6 hours painting a single fucking eye. Your compressor does the work for you. Your little moisture trap does the work for you. Your 0.2mm needle does the work for you. You are not a painter. You are a fucking weather forecast for acrylic paint. Go back to /r/modelmakers.
>>
cringe
>>
>>98956538
That's it. I'm sick of all this "glorified spray can" bullshit that's going on in WIP right now. Airbrushes deserve much better than that. Much, much better than that.

I should know what I'm talking about. I myself commissioned a genuine Iwata from Japan for 2,400,000 Yen (that's about $20,000) and have been practicing with it for almost 2 years now. I can even preshade slabs of solid steel with my airbrush.
>>
>>98956462
>>98956463
>>98956465

Sweet. Thanks bros.
Also colour theory wise, was thinking purple for the dark, was not decided about the light which is why I was asking . I have a greeny blue contrast or a regular orange
>>
>>98956565
Post the AB
>>
>>98956308
I don't remember off hand my jeans formula, I'll have to try to recreate it later, but I likely started with something like a stegadon scale green, or vallejo German grey with more blue added in as the base layer while adding a bright desaturated blue for subsequent layers and highlights
>>
>>98956538
damn, saving this for future use as a pasta
>>
>>98954802
Very cool
>>
File: 20220613134625el13uY.jpg (129 KB, 800x800)
129 KB JPG
>>98956405

1. I've seen pictures of t-72s with ERA on the sides, shaping patterned plasticard sheets is also a lot easier than flat sheets. I like the round design of the t-55 turret and didn't want to cover it. Of course that's an aesthetic decision that doesn't make military sense...

2. I thought they looked cool, they really didn't serve a purpose outside of that. It's supposed to be a sci-fi tank.

Hadn't heard of ryefield models, will need to check them out, thanks. I also had an idea of using plastic comb foundation as a basis for reactive armour. I think the hexagonal shape would be visually a lot more sci-fi. Unfortunately over here I haven't been able to find just single sheets of those, one needs to order them in bulk.
>>
>>98956703
NTA but the extra parts for scale models are called model upgrade or detail up kits, usually photoetch/metal and resin parts for a specific kit, a few companies make them for popular model kits, voyager comes to mind
>>
>>98956703
>Hadn't heard of ryefield models
They make pretty gucci model kits, but also fuckload of model upgrades. From workable tracks to reactive armor. You can get a box of actual ERA bricks (hundreds of them) fairly cheap.
>>
>>98956859

I checked, yeah they're pretty cheap, but in 1/35 scale. I suppose that doesn't matter too much when I'm trying to make sci-fi vehicles from scale models.
>>
>>98955521
How are you blending the Snaggas into the other orks? Pretty much every mini now is mono pose and made to be as difficult as possible to convert with other stuff.
The old boys were modular with the fantasy kit. The classic boy conversion was you bought a 40k and fantasy box and made a shoota and slugga/choppa squad out of each.
I honestly really really fucking hate how they do minis now after the 15 year gap I didn't touch any figures. You really need to do some very heavy conversion and green stuff work now for almost anything more than a weapon or head swap.
Yeah you can get some more dynamic poses compared to the modular stuff, but I vastly prefer regular troops to be modular.
I've grown especially pessimistic about their minis after I built a couple of Gundam kits. Really fucking hate how new minis are built.
>>
File: IMG_20261114_132102.jpg (1.02 MB, 2182x1962)
1.02 MB JPG
>>98956405

Now I made a mock-up of era brick placement with blue-tac. Maybe it would be easier just to order the ryefield bricks, as they'd be easier to fit around the turret than the plasticard sheets.
>>
>>98956988
Want it to look good? cut out those individual rectangles, 2*3 squares, and place them individually on the tank doubled up
more work yes, but it will look 100 times better
>>
File: 1794660044875.png (564 KB, 579x868)
564 KB PNG
i'm converting something
>>
>>98957006
This.
Though imo the spaced armor on the turret (especially when angled like this) is a good idea. But again, you should not half-ass it like this, and actually make the construction. And I would definitely keep it plain, I think it would look better than the not-bricks you are using.
>>
>>98950920

Anon a few days ago was posting WIPs of his diorama, a single space marine with loads of skellies coming out the water to get him. Is that anon still here? I never saw the finished product, last I saw you were debating schemes.
If you are still here please post the finished product or an updated WIP! It was sick
>>
>>98957006
>>98957028

Yeah I'll buy the separate ERA bricks.
>>
I know there is at least one anon here who has a Chaplain On Bike.
Can you please post him with some other minis so I can get a feel for the size?
I genuinely could not find it on the internet.
>>
>>98957113
You could just score that plasticatd and snap it with a ruler along the lines
>>
>>98957127
Minicompare.com
>>
>>98957131
The website is dead for me (cant access it)
I bought a Chaplain On Bike for 20€ spontaniously and now have some crazy buyers remorse, I just spent 20€ on 1 (one) seemingly normal sized mini.
>>
>>98957148
You want a different comparison?
Anyway Its a decent mini, and its only 20 euro, treat it like a golden demon piece and spend 400 hours painting it like the winners do and you'll get your moneys worth
>>
>>98957127
Which chaplain on bike?
I have all of them in a cabinet next to me and will get a pic
>>
>>98957131
>>98957148
It's not .com, it's .info
https://minicompare.info/
>>
File: 35449.jpg (252 KB, 2479x1185)
252 KB JPG
>>98957164
I'm retarded, of course you would mean the new one.
>>98957127
>>
>>98957180
>>98957184
Thanks a lot for helping me out! Have a beautiful weekend. Height wise he doesn't seem too impressive, but the width of the bike makes him stand out.
>>98957155
>Anyway Its a decent mini, and its only 20 euro, treat it like a golden demon piece and spend 400 hours painting it like the winners do and you'll get your moneys worth
I'll get the most out of it, thanks for the heads-up anon.
>>
File: 20260515_183039.jpg (1.44 MB, 1765x2773)
1.44 MB JPG
>>98955756
Most are in storage. But once i get home ill try to take pictures of some. At least of my painted ones in the cabinet.

In the meanwhile here's a picture from 6 months ago with terrible lighting and a very disorganized cabinet.
>>
File: ork_conv.jpg (798 KB, 2468x2834)
798 KB JPG
>>98956314
Genuine feedback - the slug is way too dark because it lacks midtones. The highlight colour is fine but the jump from dark base to highlight is too sudden. You have all this space to work with - folds of skin and bloated contours, but it looks like one big block of very dark red. Keep the dark red in the deepest recesses, but get a warmer red (or reddish brown) over the other 80% and then highlight up from that. Don't be afraid to mix in other tones to break up the main colour. Take your ice yellow and gradually work it in to your red. If it starts looking washed out or pale, knock it back with thinned glazes. Contrast paint is very useful for this.
>>98956896
I get that modern kits can feel limited but the flipside of that is that conversions are much more noticeable and rewarding when you pull them off. As I said earlier I've been doing a lot of work with the Armageddon kit due to it's affordability and limitations. It's obviously a labour of love - you need to get comfortable with the idea of drilling, pinning and sculpting. Potentially hours of work, just for some random footslogger. But I love conversions and all of my Orks are gonna be individuals. As for advice - keep a bits box, look for Ork arms with obvious cut points (gloved hands, forearm wraps) then mix and match. This can help with initial variety. For full arm and head swaps, cut down the connection points to be as snug as possible, then use Milliput to fill in the gaps. I really love Milliput. I often pin stuff too using small lengths of paper clip wire before building around that. Fine grit sanding sponges are very useful for this sort of work, as well as a cheap pointed rubber sculpting tool. Practice.
>>
Can someone tell me how to do the pink-white into yellow trick? I seem to recall working very well for painting with yellow contrast.
>>
File: 1732043181815208.jpg (969 KB, 1000x2230)
969 KB JPG
>>98957261
>>
>>98957413
nta but that's very useful
>>
>>98957407
Just paint whatever you want yellow with a pink base coat. Then once it's dry, paint over the pink with yellow. Contrast just works given the amount of pigment and how easily it layers on, but make sure you cover up all the pink.
>>
File: 1787906011957683.jpg (307 KB, 1080x1015)
307 KB JPG
First time I had a paint reactivate on me, but it's not so bad with the naked eye
>>
File: image.png (284 KB, 468x486)
284 KB PNG
>>98950926

It has been sent.

I insist the recipient opens it ASAP
>>
File: meoww.gif (20 KB, 220x244)
20 KB GIF
>>98957506
Do you have a German anon as your recipient perhaps?
>>
Is there a better way to obtain a bunch of leftover bits? I love conversions and kitbashing with whatever I can find but sellers on ebay want 50 bucks for 4 arms and I dont see an option on the popular bits websites for a pile.
>>
>>98957016
Love it.
>>
>>98957624
3D printer.
>>
>>98957624
Ask around the local scene
>>
>>98957624
join /wip/ christmas and ask for bits

You can always check second hand markets or garage style sales, but in the modern world bits piles are just not common anymore. "$50 - 6 ork arms 2004 no low balling i know what i got" is the modern vibe
>>
>>98957525
Yes
>>
File: P1040897.jpg (210 KB, 1080x1080)
210 KB JPG
Happy Native American Heritage Month.

Well, I guess vaguely Mesoamerican stuff doesn't really count for that.
>>
File: P1040895.jpg (1.51 MB, 4140x2976)
1.51 MB JPG
>>98957739
I actually really like these Amazon miniatures from Bloodbowl. They're beautiful, elegant, and simple without expending details, and mostly pretty in a sportsy volleyball player sort of way without outright being cheesecake. I had to hold myself from painting them to a high standard because it was just a TTQ commission.
>>
>>98957689
No fucking way.
Well, there are 3 German anons participating in the SS, so it might still be someone else.
Just asking because I am hyped as fuck, I am genuinely more excited about the SS gift that the one I'll get from my family lol
>>
>>98957755
>3 Germans in the SS
They are at it again?
>>
File: 1665740677373670.webm (1.77 MB, 1024x574)
1.77 MB
1.77 MB WEBM
>>98957759
>>
>>98957759

I was chatting to some Germans at an Archspire show earlier this week, later I realized that I forgot to end the conversation with the traditional greeting: "für nächste mal ohne Italien". Bloody elevator wisdom...
>>
File: 1794679881740824.jpg (246 KB, 1179x1317)
246 KB JPG
Trying to figure out a paint scheme for skellies. How would one go about adding depth or texture to the bow and the arrow shaft? I think I will redo the red as I don't love how it came out. What other tips can you guys give me?
>>
>>98957755
Is there a public list with participants?
>>
File: 200w.gif (109 KB, 200x194)
109 KB GIF
>>98958000
>public list with all government names and adresses
I hope not
>>
>>98958016
I just meant the countries where the participants are from.
>>
>>98958030
Oh yeah, that does exist!
Hold on.
>>
>>98958030
>>98958033
28...United States (including APO)
6.....UK (England, Scotland, Wales, Northern Ireland etc.)
3.....Canada
3.....Germany
2.....Australia
2.....Japan
2.....Poland
2.....Sweden
1.....Belgium
1.....Croatia
1.....Framce
1.....Latvia
1.....Lithuania
1.....Mexico
1.....Netherlands
1.....Singapore
1.....Spain
1.....Ukraine

But there are also 7 more, the SS organizer said that we have a grand total of 65 participants this year, IIRC.
>>
File: 1748756290947875.png (211 KB, 521x937)
211 KB PNG
>>98958047
Thx anon.
>>
>>98957998
Shade the sides that face the table, highlight the parts that face the sky.
>>
Goddammit. Just knocked over half a bottle of plastic cement on my desk while building these Hellblasters. didn't get anything on the models or sprue, but a couple of the bases melted into my cutting mat. and now the entire basement smells like acetone. Fortunately i wasn't using any of the measurements on the mat, because those all wiped off.
>>
>>98958168
This is a good opportunity for threadly reminder that you can get Tamiya Airbrush Cleaner to refill your plastic cement. It's cheap and it will last you forever.
>>
>>98958169
>Extra Thin Cement is approximately 50% acetone and 50% n-butyl acetate, while Airbrush Cleaner is about 51% acetone and 49% n-butyl acetate
lel
>>
>>98958233
something something legally distinguishable so we can sell it as a different thing
>>
File: IMG_20261114_204852~2.jpg (1.11 MB, 2617x1909)
1.11 MB JPG
Pair after washes and with eyes. Not much done today but at least something.
>>
>>98950920
I have been using the sanding wheel on a variable speed dremel tool in a drill press mount to do material shaping and sanding of wooden parts without aggrivating my arthritic hands with manual sanding as I scratch build models.

This also speeds the sanding process up a lot. However, I spend about a third of the time cleaning the dust build up out of the sanding wheel with an old paintbrush.

Do you have any recommendations for a faster way to clean out a sanding wheel?

Also do you have suggestions on how to slightly rough up plastic surfaces without doing it manually. The sandy wheel works well on solid pieces of wood, but it tends to melt plastic when I try to send it for shaping, and if I'm just trying to roughen the surface so that super glue sticks to it better, it tends to cause melting and warping.
>>
>>98958283
Go to a hardware store and get an abraisive cleaning stick?
>>
>>98958283
compressed air cleans it quick. if you blow it with a vacuum running on the other side, saves on clean up as well.
and sand paper. just rough grit and run it along. or use the wheel but turned off
>>
>>98956314
I think the other replies talking about colors are wrong. there's no rule that a fantasy slug can't be dark red. the problem is that it looks kind of leathery. I wouldn't know it was supposed to be a slug if you didn't tell me. you need to make it look slimy. maybe you can mix up a clear epoxy with some yellow or green dye and brush it on. you should do it while it's on the base though so you can make a slime trail.
>>
>>98956988
they don't look like bricks. they look like a fucking quilt. stop gluing random shit to your model. look up what real tanks look like and then extrapolate what they might look like in the future. that's the basis of sci fi.
>>
>>98958283
you might as well get a belt sander at this point.
>do you have suggestions on how to slightly rough up plastic surfaces without doing it manually
sand blaster at very low psi and pointed at a shallow angle
>>
>>98958283
>The sandy wheel works well on solid pieces of wood, but it tends to melt plastic
you need even less speed or cooling, like running water, but it will sprinkle everywhere
i have a modified dremel, stock runs at either ~3.5 or ~7.2v, for plastic i run it at 1-2v
>>
>>98958314
>compressed air cleans it quick. if you blow it with a vacuum running on the other side, saves on clean up as well.

I do have a compressor for an airbrush and a small shop vac so I'll give that a try next time. Thank you.

>>98958303
Tell me more about these cleaning sticks please.
What are they made of?
Do you rub them against the sanding surface or roll them along it or something?
What brands are good and you need different kinds for different grit levels?

>>98958449
Do they make belt sanders small enough for tabletop model work?

I don't think I have the space for a sand blaster.
>>
>>98956314
>>98958405
I've wanted to experiment with making a surface with a little subsurface scattering effect but I wouldn't make any suggestions on that front until I'm sure my idea actually works.
In regards to a slime, I think just layering on some tinted gloss acrylic gel medium should work fine. Epoxy would be pretty unforgiving if you want to roll back or make some kind of mistake.
>>
>>98958510
>Tell me more about these cleaning sticks please.

https://www.youtube.com/watch?v=U43QGqPYm70
>>
>>98958526
dudes got a pair of cannons
>>
I made the mistake of counting and found out that I have roughly 180 unpainted miniatures at home.
Fucking hell bros, I think I lost the plot.
>>
>>98958283
Might be annoying to set up at your hobby station but I have a minvac (3.8L) I run in the neat vicinity of whatever I'm cutting, drilling, sanding, etc. if I need to keep dust down. Should be able to just clamp or tape it neat where you're dremeling and helps keep the varous bits and flapwheels and such a lot cleaner overall so there's no real time loss cleaning them. If you have carbide ones or hard stuff instead of disposables just hit them with break cleaner. Shit is amazing. Amazingly bad for you too though, wear gloves.
>>
>>98958510
nta
>Do they make belt sanders small enough for tabletop model work?
Haven't fucked with anything this small but it looks like its a thing. I like the vertical mount more for work stuff and lets you set up a rest/fence to control the piece more but you can probably put this one on its side, you're not going to be using it enough to worry about bearing wear too much I suspect.
>>
>>98958564
Maybe not 180 but I'm close to 80 at least, so I can understand the pain. I have lots of primed but unpainted but also lots of unassembled Infinity ones. And the worst part is that I still feel the urge to buy Operation Mazebreaker box AND Archon's Starcraft starter box solely because of FOMO.

Sometimes I want to stand next to myself and slap me on the head.
>>
>>98958631
They have horizontal mount ones with a bench. Just needed to scroll for another 5 seconds.
>>
testing testing can i post already
finland was range banned on halloween so thank you my lovely fellow countrymen for doing what you do best
>>
>>98958711
>finland was range banned on halloween
Perkele! :D
>>
>>98958526
Thank you very much. I'll watch this at this when I have the time.

>>98958494
>you need even less speed or cooling, like running water, but it will sprinkle everywhere
>i have a modified dremel, stock runs at either ~3.5 or ~7.2v, for plastic i run it at 1-2v

How did you modify your variable speed dremel to get it slower than its default lowest speed?

>>98958599
I will consider using break cleaner or a different solvent if I really get one gummed up.

What is a minivac? Is that like a dust buster or something else?

>>98958648
>>98958631
Neat.
>>
File: 20261114_230326.jpg (1.01 MB, 2992x2992)
1.01 MB JPG
I'm gonna do this guy but there is no way in hell I'm highlighting every scale manually, any ideas on how to approach it?

I want to give the hide some variation, green midtone, but have the belly be a bit yellowy and the top scales drift towards a green-blue. What's the play here? Drybrush in greyscale and then spray the color in? Start from the green midtone?
>>
File: 1000051845.jpg (337 KB, 2097x1368)
337 KB JPG
Slow progress but it's progress.
Both faces need a lot of work
>>
>>98959030
Highlight each scale individually, stop being a wuss, it's like 1-2 hours for two hightlights
>>
File: wip_hellblasters_01.jpg (1.13 MB, 2308x2776)
1.13 MB JPG
Got the Hellblasters primed. Hopefully tomorrow night after work I can base coat them.
>>
>>98959087
the judgemental gnome stares on
>>
>>98958963
>How did you modify your variable speed dremel to get it slower than its default lowest speed?
it's a battery powered one so i built an adapter to connect it to an old router power supply with a voltage regulator
>>
>>98959201
I don't even spend 1-2 hours per model
>>
>>98959356
Then dry brush a few layers
>>
File: IMG_20261113_142631~3.jpg (143 KB, 841x877)
143 KB JPG
Working on Franky Wazdakka. Should have given him a metal nose lol

>>98951369
>>98956263
Love seeing more orks! Both are very nice

>Also completely missed his bone (?) earring.
Most orks got so many easily missable tooth earrings and trophies, bullet trinkets, random bones, piercings, rags, bandages and leather straps, it's sometimes kinda fucking maddening lol
>>
>>98959349
Thats really cool. Mine is not battery powered. It plugs into the wall.
>>
>>98959517
nta but even easier then? a standard regulator would work. you can get pretty cheap ones. any step down with a dial
>>
I hope my SS match likes local goods.
There’s an amish market nearby that makes great jams
>>
>>98959617
Who is it, is it me?
>>
>my SS asks for only rare, expensive, OOP shit
Breh
>>
>>98959617
People usually get local stuff for the SS, especially if it's international match
>>
>>98959710
i got matched with someone who lives a literal 3 minute walk from my office.
Here have the local food you eat every day
>>
File: IMG_9955.jpg (1.77 MB, 3149x1585)
1.77 MB JPG
>>98959859
I'll trade you some Beaver Nuggets for your Nestle Coffee Crisp. It's hard to get locally.
>>
>>98959983
you dont know im a leaf.
you're right, but you dont know. wtf is a beaver nugget. ill try to get the limited edition coffee crisps
>>
>>98959859
That's awesome! I matched with someone 30 minutes away from me and I'm planning on hand delivering his gift for a really cool surprise!
Hopefully it goes well and we can get some games in together. If not it would still be cool to meet a fellow anon in person
>>
>>98959667
you are a secret santa, not a fairy godmother
>>
File: Mr Brikfist.jpg (163 KB, 570x419)
163 KB JPG
>>98951369
Bruh... how did you paint those freebooter pants? please tell me, I need to know! I want to do a freebooter squad.
>>
File: lampless.jpg (256 KB, 1149x921)
256 KB JPG
I got a partial impulsor kit in an ebay lot, and with a conversion kit I found third party I THOUGHT I had everything I needed. Only now, once the entire chassis is glued together I see that I forgot to put the headlights in.

What do I do with these gaps?
>>
>>98960184
Makeshift headlights made out of plasticard.
>>
File: 166.jpg (325 KB, 1920x1440)
325 KB JPG
I still miss winter. Wretched Australian climate. Don't come here, it sucks.
>>
>>98960056
>I matched with someone 30 minutes away from me and I'm planning on hand delivering his gift for a really cool surprise!
You better dress up as Santa.
>>
File: 20261115_044917.jpg (1.14 MB, 3280x2460)
1.14 MB JPG
>>98954645
All in all just a bad day to be the warmaster

>>98955224
The legend never dies, anon
>>
>>98960514
Really like the weathering on that black.
>>
File: Christmas Emperor.jpg (527 KB, 1115x1386)
527 KB JPG
>>98958047
Remember everyone, Christmas is still over a month away, don't panic just because the first people will get and open their gift already.

Since there is only one anon from Croatia:
- What is your stance on licorice? Since you asked for local candy.
- Favorite Space Marine Chapter?
>>
File: 1665328158583371.gif (3.35 MB, 452x498)
3.35 MB GIF
>>98960642
>Remember everyone, Christmas is still over a month away
BUT I WANT MY PRESENT NOW
NOW
AAAAAAAAAAAAAAAH
>>
>>98960642
Im a trash can, I eat everything.
White Scars and Dark Angels.
>>
>>98952072
After GW got rid of Andy Chambers after 3rd edition 40k he went on to make Starship Troopers. From what I've heard it's a decent game, but the problem is that it's just Humans vs Bugs and the skinnies who are mostly based on the animated tv show because in the original book they are just a footnote in the prologue. Three factions for a wargame is not enough to really keep it going I guess, so the game went away pretty quickly. You can still buy some of the minis from other companies that bought some molds from mongoose though.
>>
File: Unbenannt.png (1.56 MB, 1758x1005)
1.56 MB PNG
Let's say, theoretically, you were an anon from Croatia that wants LotR minis for his SS.
Let's say, theoretically, I would have a shitton of AoS orruks at home, still in sprue, I have no real use for.
Would you be happy about getting them, like could you kitbash and use them in your games ar LotR orcs or would you, theoretically, be more happy if I just bought a Balrog for you or something?
>>
File: 1794743427997.png (1.38 MB, 1589x850)
1.38 MB PNG
more ruins ready to paint
>>
>>98960686
Ruins? You could demand 500€/month for this on the German housing market.
>>
File: cat-kitten.gif (2.58 MB, 640x640)
2.58 MB GIF
>it is my birthday today
>my girlfriend bought me a bunch of italeri/tamiya tanks because she knows I play bolt action
>they are the wrong scale
th-thanks...
>>
>>98960693
Paint them as presents for her with jokes and references only you two understand.
>>
File: 1794744441560.png (2.43 MB, 2276x976)
2.43 MB PNG
>>98960687
i'm not in germany but i'm looking for a house in a similarly fucked up market, do you think i can trade this for a real one?, i making lots
>>
>>98960693
get a 3d printer and a 3d scanner, scan the sprues, shrink them to a correct size, print and assemble those
>>
>>98960679
If I was that anon I would probably not use those for lotr.
>>
>>98957506
Does his first name start with an S?
>>
>>98959566
Any recommendations for one's least likely to release magic smoke or start a pyrotechnic display?
>>
What are the most bright/saturated red, orange and yellow paints WITHOUT going into fluorescent paint territory?
I wanna try doing OSL but don't want to deal with fluorescent paints
>>
>>98961296
>I wanna try doing OSL but don't want to deal with fluorescent paints
Not sure how OSL in any way correlates to fluo paints. The whole thing is that the light source would be the brightest part of the model. So usually a tiny piece of the model would be covered in that at all. So if the weak coverage is what you are concerned about it's basically a non-issue. The majority of the effect is in the reflected/mixed light, which by necessity has to be darker and you wouldn't use the fluo stuff anywhere but the lightsource.

But to your question you'll probably get the best results if you paint white and then glaze with inks. As in actual inks, not the stuff hobby paint brands market as inks.
>>
File: IMG_5012.jpg (71 KB, 419x474)
71 KB JPG
Haven't painted in months, but I like how this one is turning out.
>>
>>98961399
I really like how this looks kinda like an entirely unpainted metal mini before expanding the image.
>>
File: Ass cannon Nurgle p.jpg (960 KB, 2361x1065)
960 KB JPG
>>98952832
Here's the Nurgle one. I won't be doing designing a Khorne one, I don't really have a use for that many ass cannons to begin with.
>>
About Secret Santa - how good are Victrix minis? I'm trying to figure out what to give (so far bought sweets).
>>
File: 71cDgd2gZlL-303423421.jpg (168 KB, 1650x1650)
168 KB JPG
>>98958963
>What is a minivac?
This little guy. Overkill for what you're up to but it plugs in so I'm not messing with batteries. Get the hose with a tapered nozzle near what you're sanding and it collects the majority easily, hepa filters and the like are probably unnecessary. There's a bunch of dyson ripoff for cheap that would likely work for what you're up to. Its more a matter of setting it up at your bench like an improvised dust extraction system so a couple of small clamps to rout the hose should do it.
>>
>>98961505
Victrix is awesome! I actually mentioned Victrix in my SS gift idea. Their best models are the Bavarian napoleonic infantry and Caesars Legions!!!
>>
>>98961535
Cool. I assume their other 28mm lines have similarly good quality?
>>
>>98961542
Some of their first lines are older and not as good, but overall they are all great. Their Vikings for example aren't as good as their Carolingian Franks, because it's one is substantially newer, but the difference is mostly in posing and sprue design, etc.
I think their first kits were the french and British napoleonic and these are definitely the worst. But the Bavarian for example are much newer and a huge improvement and I've been planning on doing a massive force of these.
>>
>>98960056
I met a /wip/ anon irl once
>be me
>zero social skills autist
>going to wargaming convention in america
>mention it in /wip/
>one anon says, "cool, I will be there presenting a game. Swing by if you have the time"
>fly halfway across the earth to roll some dice
>drag my friends away from their pick up games to go look for the anon
>find the exhibit, crewed by two 60+ oldfags
Me, awkward as fuck: eh, um. I am looking for someone
Old guy: looking for who?
Me: someone from the internet asked me to meet him here
Old guy: the internet? What website?
Me:4
Old guy:what was that?
Me:4chan
Old guy shouting: HEY THIS BOY IS HERE FROM A WEBSITE CALLED FOURCHANS AND IS LOOKING FOR HIS FRIEND. HAS ANYONE SEEN HIM.
>proceed to die from embarasement
I later found out that the old guy was that anon and did the whole thing to fuck with me. He did give us solid advice about local restaurants though. There was a noodle shop with so good food that I wake up dreaming about eating there again years later.
>>
File: saboteur.png (3.53 MB, 1882x1578)
3.53 MB PNG
yay

pls link me a torrent/repository of alpha legion stl official/tortuga bay sculpts because Learnian termies are $130 jesus christ please I beg you
>>
>>98961605
He sounds based af
>>
File: 20260930_021338.jpg (629 KB, 3359x1135)
629 KB JPG
>>98961505
They are great. I got their islamic infantry for my Alamut rank and file.
The arms are a bit wonky to kitbash with since they are mostly are split right across the middle which forces you to be handy with the clippers bit in general they are great. Varied interesting poses and lots of extra bits
>>
>>98961605
Did you end up having sex?
>>
>>98961500
How do you paint so fast
>>
>>98961663
I mean this one was easy, it took less than 4 hours. It's mostly the same colors.
If you paint slowly and want to paint faster, the secret is to not give a shit about irrelevant details and just focus on where to put the light and the shadows.
When you're learning the result is going to be shit whether you're going to spend 10 hours or 3 hours because you don't know what you're doing yet so you might as well just lay paint and move on and learn quickly instead of slowly.

I'm a noob but someone who's an actual painter could probably paint the whole thing in less than 2 hours and it would look much better.
>>
>so desperate for attention he samefags when nobody replies
le mao
>>
>>98961505

They're of great quality, mold lines in mail can be tricky to get rid of and a lot of dark ages minis have those mail shirts with shorter sleeves that reduce kitbashing potential. However, I'm pretty sure you can easily kitbash rus, normans, Saxons, Carolingians and late Romans.
>>
>>98961699
It's always the same.
>>
File: 20261115_191852.jpg (1.18 MB, 2607x2303)
1.18 MB JPG
Working up edge highlights on the brass/gold trim, just the upper section left to do. Then on to weathering.
>>
>>98961851
Does this count as drilled barrels?
>>
File: IMG_20261115_210405.jpg (611 KB, 1591x1877)
611 KB JPG
Made decent progress today i think
>>
>>98961898
That's a good question, I normally would, but given the amount of resin dust that was created in actually cleaning and building out the parts I was happy enough not to create more by drilling them out, this time.
>>
>>98961296
A proper oil or artists acrylic, def not anything from the hobby paint brands
>>
>>98961296
Anything using real Cadmium red is the best.
However Cadmium is toxic so don’t lick your brush.
>>
>>98961945
what mini is this?
>>
File: johnny_vs_johnny_large.jpg (326 KB, 1280x932)
326 KB JPG
>>98961605
>I met a /wip/ anon irl once
How do you think [pic related] happened?

I know a few people from here IRL, but ironically, I have never met in person the one I keep in touch with most frequently.
>>
>>98962535
met people here, played online games, met up in person to game more. a couple times
good mix of awkward autists and genuinely unhinged schizos. so basically your normal lgs crowd
>>
>>98961605
Lmao based.
>>
>>98962535
I'm surprised GW hasn't done a Primaris throwback update to Johnny. They made that John Blanche sister into a model.
>>
>>98961605
>>98962535
>>98962739

That sounds weird as hell.


I met a few of them. I follow a bunch of them on instagram now. They mostly did greenstuff work and sculpted monsters.
>>
>>98962535

I played helldivers 2 with some /wip/ guys once.
>>
I used to play vidya with a templar anon. I didn't know he posted here until later.
>>
File: 1601381052627.jpg (106 KB, 1091x1186)
106 KB JPG
>>98961605
I've met a couple of elegan/tg/entlemen over the years and they were lovely people. I went to the wedding of one and still hang out regularly with one other.
>>
File: 1775578102339268.jpg (535 KB, 1080x774)
535 KB JPG
Japan anon... Do I write honest answer to the actual mini boxes price? Or do I just make it cheaper so the total is less than 10k yen? I heard there's a tax for you if it's higher than that? I don't know if I can send you edible or snacks too? It feels quite strict. Posting a wip so its on topic
>>
>>98959030
with contrast paint would have worked like a charm... to bad you primed it black.
>>
>>98961605
Lol based.
I wonder if people I have played with IRL are from here?

I have met anons from /O/ doing drive days. Good dudes who we have now known each other for over 15 years.
>>
>>98963074
Not Japan-kun, but that skin is great. Do you have any gluttons painted?
>>
File: Secret Handshake.jpg (68 KB, 800x536)
68 KB JPG
>>98961605
Should have done the secret handshake.
>>
File: wip_hellblasters_02.jpg (700 KB, 2108x1591)
700 KB JPG
Tried another zenithal thing for these guys. Payne's grey base coat -> ultramarine blue -> meredius blue. I think I ended up over doing the turquoise, you can't really see the ultramarine blue transition.
>>
>>98962190
Lumineth archer legs and exodite dragonmaster torso. Working on a exodite army, that guy's a dire avenger.
>>
File: side plates.jpg (18 KB, 319x340)
18 KB JPG
>>98961605
That is exactly the behavior I'd expect from a 60+ year old 4chan user.
>>
>>98962847
A Primaris Johnny would be something I'd expect out of an event model. mite b cool

>They made that John Blanche sister into a model.
Also the BT Castellan.
>>
Im really having writers block about what to get my SS for Christmas, and so I haven't even bothered looking into anything yet. His suggestions are something I know nothing about and it's just making me freeze up and lose motivation for this gift. I might just end up throwing together some shit from my pile of shame and hope he likes it
>>
>>98961500
I kind of wanted to see the corn one though, 3/4 doesn't sound right.
>>
I feel like I'm losing my mind here

What color should this be? Lets pull up a reference image and directly compare colors to a paint chart
>Paint on a white pallet doesn't look the same shade
>Paint samples online don't look the same shade
>Suggested near-matches for other manufacturers don't look the same shade
>The color swatch on the bottles are slightly off

Gotta eye-ball paint on the model to my color references, trying to pull colors off a reference and compare them to a paint chart feels like a waste of time

Speed paints are even worse, the only good reference is from people posting images of results on white primer
>>
>>98961507
I tried to C-clamps, but the hose kept coming loose.
I don't want to really crank it down because then that'll just crush the hose.
>>
>>98963978
Maybe you should look into other types of clamps. There are probably hose clamps out there that will suit your needs
>>
>>98963701
nice Dullahans bro
>>
File: pclamps.jpg (18 KB, 474x325)
18 KB JPG
>>98963978
P-clamps if its not going to move around might work. Lots of diameters.
>>
>>98963976
ultimately color matching is for when you know what the color is supposed to be. if you know the tank is supposed to be mil std 5364 gray green brown then you can just get that paint. if you don't know what the color you're looking at is you will save yourself trouble just mixing it yourself instead of trying to figure out which of hundreds of paints it is.
>>
>>98963074
One of the two registered anons from Japan reporting in. For three years haven't had any problems with sweets in the parcels from anons. And it was a lot of chocolate from Bongland last year. And even maple syrup from leaf anon. As for the price of the minis I dunno. Just in case I always write less, than it was.
>>
>>98963701
>all this time i could've used a colored adhesive pad like patafix instead of (semi) permanently gluing all my heads on
>>
>>98964083
Why would you glue them on?
>>
>>98963709
Neat. I was thinking exodite, but legs threw me off.
>>
>>98963761
What did he want?
>>
>>98963761
I'm in a similar spot, so I'll probably gift him what I'd love to receive: a fuckton of local food.
>>
>>98964180
Just hope your not indian
>>
>>98964133
I glue everything on when assembling minis?
I know some anons drill a hole and use mini magnets but that sounds like a pain in the ass
>>
>>98964314
You know you can just not glue the heads on and paint them separately, right?
>>
File: 003.jpg (19 KB, 240x300)
19 KB JPG
>>98963074
One of the Japanons here. You can make it cheaper, especially if you ship it without shipping insurance. Anything processed works for sweets and foodstuff. Just no meats, or fresh food or fresh milk products. And please, do not send weed or drugs, because I will go to prison for that shit.
>>
>>98964445
Oh shit, it's you.
Glad to see you are still here and doing well, I'm the sister who sent you your gift in 2020.
>>
>>98961898
>>
File: FvHxyUBaUAAGIr4.jpg (619 KB, 1479x1109)
619 KB JPG
>>98964539
EY! nice! Glad to see you are still hanging around! Those marines are still sitting on my shelf and draw attention from newcomers to my place. The Sherman also saw good use in my Chain of Command campaigns over the years.

Although, I am ashamed to say, that the fellowship still lies unpainted in my drawer...
>>
>>98957016
cool
which brand is that undead horse from? rings I bell; I think I had one similar
>>
>>98964016 >>98964009
This would be something I'd be frequently setting up and then taking back down because the desk I use for a work surface is small and the room that I work in is not large enough for a bigger desk, meaning I can't have a vaccume hose permanently mounted taking up space when I'm not using the dremel drill press.

Do you have suggestions for such a setup?
>>
File: images (2).jpg (35 KB, 387x516)
35 KB JPG
Anyone care to shill (You)r brushes? What brand(s) do you use? What do you like about them?
>>
Can you guys perhaps recommend a clear/transparent primer, if such a thing exists?
I am mostly building military vehicles, which often times come colored in, for example tan or green. I'd love to use that background as a basis for painting them.
Alternatively, can I just skip the primer altogether? I do not have to paint that much, since the base color of the plastic takes away like 90% of the stuff I wanted to paint anyway.
>>
>>98965215
What are you securing the hose and clamp to right now? Maybe there's a way to attach the clamp to the hose and then temporarily attach the clamp. Like maybe there's a way to thread through with a twist tie, even.
>>
>>98965243
I've seen clear primers around, but they're kind of hard to come by. Primers come in a pretty wide range of colors, including shades of green, and I've been told once that there isn't a huge difference in enamels and primers, that it was just the amount of talc used. I honestly never looked into that, but I've never had adhesion issues when I did apply spray enamel directly to a model as base color, skipping primer.
>>
>>98965215
man why don't you guys just move your shit into a bigger room? are you hiding from your wives in a closet?
>>
>>98965243
If you - for that very stupid reason you are mentioning - want to skip the primer, you can start using lacquers instead of acrylics. You need an airbrush and a respirator with big boy filters for these, though.

That said, if you are just starting, and the way you cleaned up and built your model implies so, don't try to develop new ways how to halfass something, and simply learn the proper way. The color of the plastic is NEVER the right shade, not to mention the texture or finish.
>>
>>98965243
Trying to paint on bare metal parts (or rubber, since tyres sometimes come as actual rubber in scale models) is in theory possible and in practise not
one of the big advantages of a primer paint rather than just the etching chemicals is that it makes any gaps, mould lines, sinkmarks, and other such shit that will completely ruin the look easily visible
and the time saved by skipping a basecoat won't really pay off with regards to how bad it'll look, imo
>>
File: 1753987619792935.png (12 KB, 244x128)
12 KB PNG
>military model makers watching me kitbash an ork heavy slugga on a m8 scott tank cause i think it looks cool
>>
>>98965227
Rosemary & Co. They are good quality. Also relatively cheap.
>>
>>98965326
No one cares. If anything, most people would consider it cool.
>>
>>98965337
Not the anon, but I had 40K autists refuse games with me because I used a "wrong" paint scheme for my dark knights.
>>
File: 1794847966579.png (502 KB, 843x811)
502 KB PNG
>>98965067
it's the nurgle lord horse
>>
>>98965344
>40k
>games
There's your problem
>>
>>98965344
Some problems fix themselves. The turbo autist is too autistic so you don’t have to interact with him.
>>
>>98965227
second >>98965329. rosemary 33s are my go to. around a tenner for a brush, so way more than a cheap china pack. but its just so nice to paint with. and cheap compared to other brushes while still hitting a nice brush with a great point. i generally base with cheap synthetics (i have a golden maple set, they are fine) then use my nice brushes on top
>>
>>98963701
it's subtle but I can see the zenithal. Also the color is really nice. Good job.
>>
>>98950926
To Belgian anon, it has been sent, had to fight the weight of it near the end so pardon if the box is not pretty. I too insist you open it up when you can and share what you got.
>>
>>98965413
>>98965329
>Unfortunately, we cannot ship sable to the USA at this time. Please choose an alternative.
It's over
>>
File: IMG_20261116_184429~2.jpg (1.67 MB, 2081x3182)
1.67 MB JPG
>>98965227
To be honest, to me there are roughly three categories of natural hair for miniature painting use - super cheap (barely usable), middle ground (what I use) and super-duper expensive I wouldn't risk using. Brand barely matter, I saw "kolinsky", "kolinsky red sable", "red sable", "golden star kolinsky" and many other variations from Kolibri, Lineo, Davinci, Kozlowski, Restaurohouse and Rembrandt. They all perform the same, with only slight variation in price between them. I gave up "hunting" for good ones, just grab Kolibri or Davinci and use those. Yeah, there are some expensive W&N or Raphael or Avantgarde such but I don't want to even ruin them with cleaning since every single time I use some brush, after some time it will get damaged solely from that cleaning procedure (yes, I use soap, that "special" soap from art store is just the same but for 5 times the price, also apply conditioner from time to time). There are also so called "premium synthetics" but these are for naive newcomers since they will wear off just like any other synthetic (which is still good to have for drybrushing, washes or metallics).

Already have whole cup of brushes that never saw actual work yet, that's enough. But I won't lie - sometimes I buy brush or two solely to have excuse to talk to girls at art stores, since these are staffed almost exclusively by friendly female art students. I'm sorry.
>>
>>98965566
my lgs stocks them. you can also try actual art stores
>>
>>98965261
The right hand side of the fromt edge of the desk.
>>
>>98965571
>But I won't lie - sometimes I buy brush or two solely to have excuse to talk to girls at art stores, since these are staffed almost exclusively by friendly female art students. I'm sorry.
based
>>
File: 1794852104115.png (974 KB, 717x1209)
974 KB PNG
it is now ready to paint....maybe next year
>>
>>98965215
>project scope creep is a constant hazard
Make a working board you can store vertically under the desk.
Attach the pclamps to the base with a hose in it and enough tail to detach the hose from the vacuum when you're not using it.
Not sure if you're making a stationary rig for the dremel, if so you can likely make the feet fixed to the working board.
>>
>>98965651
If you've got time to take a picture you've got time to prime.
>>
>>98965438
>some anons are getting their SS gifts over a month early

https://www.youtube.com/watch?v=dpKc8N3FJsQ
>>
File: IMG_20261116_192156.jpg (1.95 MB, 3198x2668)
1.95 MB JPG
>>98957129

I started doing that actually.
>>
im thinking to wait til black friday, really max out how much i can pack into the SS box. as long as the gift arrives before christmas, its all good right?
>>
What is a good ratio to mix PVA glue and Furniture Polish to get DIY Mod Podge?

>>98965716
Kickass.
>>
>>98965652
>project scope creep is a constant hazard

You make an excellent point.
>>
>>98965716
Yeah, now imagine how much better the rest will look if you do what you've done on the current there
>>
>>98966173

I feel like I need to push back here a bit. I've looked up quite a bit of images of how kontakt-1 bricks and other ERA. Often they are laid out very symmetrically, like on the Abrams I've attached to this message. Typically the "sloppiest" era placement I've seen has been on the turrets. However, your critique has made me think more carefully about this project and pay much more attention to details.
>>
>>98966248
NTA, but I wouldn't necessary see Russian/Ukrainian vehicles and their ERA application as good. There are some pretty gnarly (and some completely retarded) things these dudes are doing. Though, admittedly, the most retarded shit comes from Russians. Like putting ERA on BMPs and shit.
>>
>>98966294

I'm not arguing about the pros and cons of ERA placement. I brought up the example because I had seen very neat rows of ERA bricks, as well as ones that have been placed more sloppily. I had considered it justified to use these bigger plasticard sheets for larger parts of the vehicle, while it was better to cut them to smaller pieces for placing them on the turret.
>>
>>98966294
Russians pioneered era, and their armour actually sees combat, so it's leagues above western stuff
Same shit was said about fpv drones and cope cages, but now as soon as the west starts to adopt it (years later) it's legit...
>>
>>98966423
>Russians pioneered era, and their armour actually sees combat, so it's leagues above western stuff
lmao sure thing, Ivan
>>
File: images (11).jpg (23 KB, 576x532)
23 KB JPG
>>98966248
that doesn't disagree with my original suggestion, just place them as neatly together as you can, individually placed ones with tiny imperfections will look better than a exactly aligned sheet of plasticard
>>
>>98966423
>so it's leagues above western stuff
lol
lmao
>cope cages
They were originally called cope cages because they were first deployed against weaponry (Javelins) they do exactly one thing against - often prevented the crews from exiting from the burning vehicle, hence occasionally called "grills" or "barbecues".

>>98966417
I'm just saying, there are situations and placements when reactive armor doesn't make much sense (like with those BMPs). It should be always placed with that in mind.
>>
>>98966426
Sorry I'm Australian, it's not hard to read up.on, kontakt 1 has a wiki which is prob all your able to read anyway
Go learn something
>>
>>98966450
Cheers to Melbourne Oblast, comrade.
>>
>>98966444
no, that's the use you attributed them to, not what they where intended for
And why are you surprised a nation now at war for years against a equal opponent has developed better and weaponry? that drives military tech forward much faster than peacetime buerocracy and politics
>>
>>98966453
5 shekels have been deposited to your account
>>
>>98966457
>no, that's the use you attributed them to, not what they where intended for
Wrong.
>And why are you surprised a nation now at war for years against a equal opponent has developed better and weaponry?
I'm not surprised, because it's a false claim. Can you show me these superior examples of Russian ingenuity?

>>98966461
>exactly one minute apart
toplel. Maybe go back to /pol/, craftsperg? I'm sure there are similarly delusional retards there.
>>
>>98966294
>>98966444

Would it make sense for an APC/ifv that ferries power armoured troopers to be equipped with ERA? The reason why it's not used for transports is because it would shred unprotected infantry, right?
>>
>>98966471
>craftsperg
Lmao
Rent free
Sherlock I replied to the two people who replied to me, there's no mystery who it is...
yeah I'll provide the proof right after you, now back to /k/
>>
>>98966505
It very much makes sense on IFVs; they are supposed to stick around and fight with the infantry. Western IFVs like the Bradley use reactive armor, so do top-of-the-line vehicles like the Puma.
On APCs, which are generally very lightly armored, it depends on the vehicle. Something like like BMPs make zero sense - not only is the armor too thin, so it gets rekt anyway, but you might also end up ventilating infantry not only around, but also inside. At least with the Kontakt 1s.
More or less applies to older western APCs, like M113. Though these would usually deal with custom-made reactive armor if needed (I think Israelis done some solution of their own for M113, but I can't remember the name), not slapping Kontakt on it and calling it a day.

>>98966510
>nothing
As expected.
>>
>>98965716
that gun looks like something i put in my ass
>>
>>98966577

Is it good or bad?
>>
>>98966688
feels good man
>>
>>98966471
>hurrdurr russkies can't innovate
you should go back to pol or k or wherever your ignorant ass crawled out of.
>>
File: 20261116_222841.jpg (1.06 MB, 2313x2724)
1.06 MB JPG
Attempting to restore a few of my Lugganath Eldar from forever ago.

The black on the tank has come out with a really weird finish but hopefully I can smooth it out. Any advice on getting smooth results from Pro Acryl Coal Black? Might try a different paint and see if I can get that to go on smooth.
>>
>>98966707
Imagine having reading comprehension this bad. Are you even sentient?
>>
>>98966707
Nta but I'm an aviation guy and always had a soft spot for Russian helicopters. So kino. Western planes can't compete
>>
>>98964180
I hope you don't have me,.I'm not fat
>>
>>98966573
>>98966577
samefagging
>>
Okay
Which one of you was this?
>>
>>98966959
What is this?
>>
File: hey ive seen this one.gif (1.29 MB, 498x270)
1.29 MB GIF
>>98966959
>women ruining everything
>>
File: 20261116_201600.jpg (388 KB, 4000x2252)
388 KB JPG
Elfs
>>
>>98967101
it says what it is at the top of the document you braindead retard nigger
>>
>>98967255
Damn, didn't know we had IPMS(UK) staff posting here.
>>
For those who used sponges for painting, do they have to be bullet shaped?
>>
>>98967289
No, but having the point does help focus paint when stamping it on or getting into tighter areas without having to cut up the sponge. It's just a matter of convenience since if you don't need the point you can just flip it over for the larger surface area.
>>
>>98967289
porousness matters more than shape when it comes to achieving a desired effect, but I'll second >>98967314 's comments on convenience too
>>
File: stipple_sponge_12pc.jpg (399 KB, 1500x1500)
399 KB JPG
>>98967325
>porousness matters more than shape when it comes to achieving a desired effect
Yeah, that too. Makeup sponges are good for smooth coverage and fine texture, but stipple sponges are great for effects like scratches or chipping.
>>
>>98967314
>>98967325
>>98967343
Good to know. I have some for oil washing, this will save me a trip.
>>
>>98967212
So kino
>>
New thread:

>>98967735
>>98967735
>>98967735



[Advertise on 4chan]

Delete Post: [File Only] Style:
[Disable Mobile View / Use Desktop Site]

[Enable Mobile View / Use Mobile Site]

All trademarks and copyrights on this page are owned by their respective parties. Images uploaded are the responsibility of the Poster. Comments are owned by the Poster.