It didn't work. It says it is plug and play you don't have have bypass the ballast. What now?
>>2951576you rolled it into the contacts correctly on both ends? you take out a working fluorescent or a dead one? fucking up the contacts is the most likely, next is bad ballast. if you have other fluorescent fixtures of the same size play swap a bulb until you figure it out.
>>2951584I had contact and tried in other fixtures and it doesn't work. It only flashes on momentarily when I turn the power off.
>>2951591
I just rewire the fitting when I need to put an led tube in, you just do straight 240 or 110 what ever you've got into the tomb stone.
i want to find whoever invented fluorescent tube lighting and kick him in the nuts.>>2951591maybe you got a bad bulb
>>2951576Re-wire without the ballast. Check to make rain well sure wires are proper. Re-try the bulb and if it still doesn't work take it back as defective.
>>2951714Damn well sure. I ducking hate autocorrect...
>>2951695There are different kinds of LED replacement bulbs. Some use both ends as L/N, some have the two pins on one end as L/N and the opposite end is just dummy pins.Just as >>2951614 posted with zero context whatsoever.
>>2951576your ballast is a switching one, that does not work with led replacementsyou have to rewire the lamp directly to mains (basically remove the driver), which is something very easy to do
>>2951739This is what I've got.
>>2951807you dingus didnt bypass the starter
>>2951807Remove the balast, dummy.The silver cylinder. Twist it to unscrew, replace with the one for LEDs.
>>2951576>>2951807it's literally cheaper and easier to just buy the whole light instead of fucking with the bulb. you can get undercabinet led lights for like $10 now at menards
>>2951927>>2951932see>>2951576>It says it is plug and play you don't have have bypass the ballast.
>>2951807Thw silver thing is the starter. The box is the ballast. The ballast is probably bad, that's why new fluorescent wouldn't work. Even though the led would work with a ballast, the ballast is still bad and won't put any electricity put to run it
>>2951968The starter is not the ballast
>>2951966>it's literally cheaper>$10 for the equivalentPost the $10 equivalent.
>>2951989they run them on sale all the time if you sign up for their emailed online deals, but they go fast
Just bypass the ballast, it only takes a couple minutes.
>>2952176I need a wiring diagram.
>>2951977LEDs dont need a starter. OP should cut out the starter and hook the 2 wires together.
