Does the quality of air lines matter or should I just buy the cheapest ones from amazon?
>>2970337stupid questions are stupid.
I got a 3-pack from Tractor supply like 15 years ago and still on the first one
>>2970337How much do you plan on handling and using it? I like the red rubber hoses. No pvc or hybrid bullshit, they are terrible in real world use. The pvc ones are stiff when cold and have a memory effect real bad. While the hybrid ones are better, they still suck compared to a good rubber hose. Get some ferrules and a crimper and learn how to put a proper end on them because they will break at the ends of the hose 99% of the time as that is where the worst flexing happens. Hose clamps are bulky and suck ass compared to a proper crimped ferrule.
>>2970464This is a proper air hose crimper and will make your hose ends look better than factory and a pleasure to use. You can grind the old ferrules off of factory hose ends and re-use the barb fitting as long as you don't cut too deep and mess the barbs up. https://www.ebay.com/itm/257205159254
Go by the pressure rating for that hose.The cheap ones will have a low rating, or they won't disclose it if that's something they can get away with where you are. The higher rated ones will be more expensive. If you need higher rated ones, get higher rated ones.
>>2970337>Does the quality of air lines matterwords of somebody thats never fought a shitty hose that turned into a stick of sch160 hitensile because the temp is below 90fand if you weld the only ones that dont get burn holes from the airarc slag fountain are the continental gorilla
