Just installed Arch on a NUC8 I got from ebay
Not sure how badly it got raped by the previous owner but when I ran CrystalDiskInfo it said the m2 disk was like 96% healthy
I installed it with a ext4 fs and when I booted into it, I ran dysk and it's reporting 221GB out of 234GB are free, so 13GB are used and I did a minimal install (only installed a few things to get connected to it from my main machine so like openssh and a terminal font)
What's worrying is how smartctl has reported some weird shit already
https://pastebin.com/TQ1WwAKn
Error 336 [0] occurred at disk power-on lifetime: 3846 hours (160 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 0b ec b5 00 a0 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ea 00 00 00 00 00 00 00 00 00 00 a0 00 00:03:44.299 FLUSH CACHE EXT
2f 00 00 00 01 00 00 00 00 08 30 a0 00 00:04:08.199 READ LOG EXT
ea 00 00 00 00 00 00 00 00 00 00 a0 00 00:04:06.983 FLUSH CACHE EXT
ea 00 00 00 00 00 00 00 00 00 00 a0 00 00:03:34.427 FLUSH CACHE EXT
ea 00 00 00 00 00 00 00 00 00 00 a0 00 00:03:05.686 FLUSH CACHE EXT
Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum.
Error 335 [63] occurred at disk power-on lifetime: 61166 hours (2548 days + 14 hours)
When the command that caused the error occurred, the device was in an unknown state.
Should I reinstall Winshit and do one of those disk checks where it marks bad blocks or whatever?
I've bought several of these and the m2 never shit itself like this before