>>64316894
What's the hot product to buy rn for a retard who needs to be spoonfed? Still just the Hoffman?

>>64316906
AS Designs super safety. Their ARC Selector wi probably be better, but the first batch of pre-orders is sold out.

Beretta 92 FRT

https://youtu.be/k-1vrRuWHJs

I already preordered, love my glock FRT so why not.

>>64317759
hell yeah, M9 is super simple to FRT. Raffika here we come

>>64317809
unfortunately raffika is 3 round burst, but yeah still pretty sick

Still no selectable glock trigger yet? I dont want to have to buy an M&P...

>>64317957
M&P 2pos exists in prototype, FRT only no position is out, reliable and well developed.
People are still trying to unfuck the no position glock FRT

>>64317032
I got in on the first batch, am supposed to see shipment by beginning of October

File: 1000022251.mp4 (2.85 MB, 1844x1080)

2.85 MB MP4

SS PSA Jakl, using the AS designs kit. Has had some strange issues but I was running a deez nutz SS, hoping I can get it more reliable with the AS-made SS I installed yesterday

>>64318684
Update: it did not fix it. Basically I get inconsistent bursts before the trigger fails to reset in super safe mode (1 to 6 rounds, usually exactly 2). No issues in semi. It's infuriating, I can't figure out the problem point. Functions checks are always completely normal. Though I did notice today the supersafe mode required a significantly heavier initial trigger pull than semi. Is that normal?

>>64318504
delayed

Batch 1 in-production, ships mid-October. Batch 2 to follow about 2-3 weeks later.

9/24 UPDATE - Our supplier has run into a machine calibration issue and a large number of parts are out of spec and not up to our quality standards, this has delayed production by a few weeks as multiple parts need to be remade.

File: 1670067169985043.jpg (122 KB, 740x920)

122 KB JPG

>>64319793
Had a similar issue with a SS before, had to polish (lightly) the cut part of the trigger with a Dremel. Try that maybe?

Any suggestions on lowers? Sub 100 is fine budget wise just tired of seeing some posts for stuff like PSA and then the listing explicitly says high shelf making me wonder about consistency/compatibility

>>64320667
anderson, bushmaster

Got my cmmg conversion kit working flawlessly. Picked up a metal slip trip that doesnt need extra weights. Worked just fine in my 10" barrel as well as my friends upper with his 4 or 5" 22 dedicated barrel. Was too much fun.

>>64320719
im still working on my 4.5in suppressed dedicated build, pain in the ass to get working.

got pretty much all borbuddy stuff aside from the upper.

Playing around with springs and weights, getting a lot of light primer strikes. I was using a DTT frt but will switch to the atrius I bought recently.

>>64319793
sounds like bolt bounce. you might need a heavier buffer
https://www.youtube.com/shorts/3CwNXxTOG28

>>64317032
Go to DeezNutz and by a super after. The work without problems, and they cost less than fancier solutions

>>64319793
The SS FAQ mentions heavy trigger pull need trigger modification. Take off a little on the round end of the trigger. Just a little, retest, repeat until the trigger improves

>>64320736
I don't know if the SS and the FRT slip trip are interchangable. I know they offer 2 different ones on their website.

So has there been any scuttlebutt about Atrius? I feel duped since I got one and after some light dremeling got it to work perfectly, but since then the AS Designs dropped their trigger and safety and it seems to be the new best option? But I can't bring myself to rationalize if I should buy one of those too, but the idea of finally making my Brn-180 FRT'able is really enticing

>>64317032
Yea ARC is a good step up from the SS but the Atruis needs a few tweaking to it's design so that it doesn't bind and snap off on non-mil spec BCGs.

>>64316906
If you absolutely want the most retard proof plug and play drop in 3-position system and do not care about cost then RareBreed is still the go-to. If you don't care about 3 position, don't want to pay 500 dollars for something that costs 50 to make, or hate the idea of patents then Hoffman is a proven design. The ARC seems to be the new hotness but I haven't seen any reviews so buyer beware. Atrius has known problems (lever cracking).

>>64320402
>>64320948
Hmm. I'll swap the trigger back to the deez nuts version and see if that changes the pull, keeping the AS cam and lever. I'll try fucking anything at this point.
>>64320753
It's a jakl. Piston rifle. I fear you may be correct about bolt bounce but there isn't exactly a buffer I can swap out ezpz.

>>64320997
i have them both

Where the fuck are you people shooting in FRT mode?
t. Landlet

>>64324475
I drive half an hour to the only place in my region that allows full auto fire. Shit was better when I lived in the rockies, you could go anywhere and shoot whatever so long as there wasn't a fire restriction

File: 1737022225805171.jpg (162 KB, 1024x885)

162 KB JPG

>>64324916
>mfw closest federal land is 6 hours away

>>64327306
I miss living right next to the national forest. Shit was so cash. I'd never heard of a "private gun club" in my entire life before I moved to this shithole on the eastern seaboard

>>64329009
NCfag here, it fucking sucks here. Thanks to all the future astronauts here, all ranges have tons of bullshit rules. Went out to NV and saw people out in the middle of nowhere shooting while offroading. I want that freedom

>>64316894
I miss fosscad - only reason I used that shitass site :(
Kinda wild too when stuff like r/meth is allowed

>>64320870
Super vouch for DNT, did a face to face with him, extremely nice guy.

>>64324475
10 minutes from my driveway to the desert. Shooting suppressed under NV also helps. Doing whatever I want and not bothering anyone/being bothered is awesome.

Any news on AUG FRTs? I know one already exists but it requires modification to the stock which I don't want to do. Curious if anyone has made something else

>>64330676
r/meth is a public resource for those affected by the debilitating plight of drug abuse, don't be so heckin racisterino

>>64330791
People have been exploring either using the safety or rear stock pin instead - they are also exploring a progressive trigger Semi/FRT but IMO that's going to be asking for trounle without a FRT lockout . Considering there's absolutely no source whatsoever for AUG ALO automatic lockout triggers (because only Ireland and Australia used them) its going to be a uphill battle.

For now If you don't install the selector extension you don't need to drill the stock - it just leaves the gun in semi or FRT unable to switch until you pull the pack.
IMO just get a spare stock - non BHO NATO stocks are cheap

>>64330791
Most development has been side tracked to PS90's as they use the AUG's trigger pack

Have they made FRT’s and/or Super Safety’s for semi auto conversion’s of milsurp weapons or is the market still untapped for that?
Also do they work in semi auto M240/9’s?

>>64331108
like this?

https://youtu.be/GnuSbhxFoYA

File: m249.mp4 (642 KB, 1862x1614)

642 KB MP4

>>64331108
its being worked on

>>64321098
>AS Designs
it hasn't dropped. Wait for it to actually be produced and shipped out before thinking about whether you need it or not.

>>64321166
Everyone I have seen use an Atrius says they break quickly. Always in the same spot, which is where the lever bends. I got one and it looks frail AF. I'm not even going to bother installing it. I'll just wait a couple weeks for my ARC to arrive. Plus Atrius had the multimonth shipping fiasco with no comms while ignoring emails. I wouldn't recommend anyone go with Atrius over AS Designs at this point.

>>64316894

You guys realize that eventually a mass shooter will use one of these and they'll instantly be made illegal right? (i know it was overturned) but even Trump banned bump stocks after Vegas. The second a shooter uses one of these they'll be illegal.

>>64331925
>you guys realize that PRRRRFT FFFFRT PLLLLFFFT SHLLLLLRP
Shut the fuck up, fag.

>>64324475
i got friends with land, or friends with relatives with land
otherwise theres an indoor range that lets you shoot FRTs though you have to pay for a membership and a full auto class (so they know you can control the gun properly)
retards still managed to get one of the full auto rental guns taken away there though because they kept shooting the ceiling

>>64331108
its largely untapped, but I started a company with the goal of going in that direction
hope to design FRTs for guns like the sten, suomi, ppsh, FAL, mp40, pps43, and the kp44
though the blowback guns might take very carefully designed FRTs to ensure they dont have an out of battery, which probably necessitates modifying the gun instead of having a drop in system
but most of those smgs come from kit builds anyways so its my hope that the buyers would be savvy enough to drill a few holes or dremel a little material if they can build the gun to begin with
>whats your company name/want details
it'll probably get shilled enough here that you wont miss it if you just lurk in the general over the next few months, too early to anounce anything just yet

>>64331121
wonder what that cycle rate is

What happened to the guy a thread or two ago who was making his own FRT/SS

>>64331925
>The second a shooter uses one of these they'll be illegal.
After BLM rioters were protected by the police and niggers running around with Glock switches without the ATF caring, think people give a shit?

File: PXL_20250922_004108543~2.jpg (3.99 MB, 2896x2776)

3.99 MB JPG

Waiting on my Arc-Fire to ship. Was in first batch.

Working on three position AK FRT SS. Seems promising.

Wen ARC restock
Wen FART for ceepee33
>>64332125
Gib AK one

>>64332282
https://www.youtube.com/watch?v=qcKaC_d2PUU

>>64332125
I'm waiting on mine to ship as well. I need to mill out my LMT sbr lower first though as the RBT I have in it will eventually go to my scar 17 once the lower I need comes back in stock

>>64332051
thats prolly me >>64332029
took two months for the chinese shitshop to produce and ship my prototype because of a hangup, and now in the process of troubleshooting the design
my other FRT, an upgraded super selector that i designed, i wont be able to sell due to possible legal trouble (i might end up fighting both atrius and raregreed if i started selling it) but i will upload the files for anyone to use as they see fit

File: 1687445748283046.jpg (1007 KB, 4096x2376)

1007 KB JPG

Any chance we'll see a three position AR-10 super safety? I was hoping the Super Selektor could be used but they said it doesn't work on 308 rifles

>>64332546
You can use standard FRTs with AR 10s but you have to pin a little tab onto the BCG to knocl the lever down sincs bolt geometry is different

>>64331925
cool man whatever you need to tell yourself to believe the grapes are actually sour and bad

>>64331925
Asshurt mosinfag detected

>>64331108
Some dude built an FRT'd MG42. Plans aren't online afaik, though

What do I do as an NVfag and nobody will ship to me?

>>64334724
3d print

>>64332751
Any recommendations or guides to this or do I just compare the dimensions of an AR-10 and AR-15 bolt and wing it? Had some people tell me Grey Market Research has a guide on this but it 404s

>>64332125
I know you have to do some trimming nonsense, I just wish someone made a drop in 3 position

>>64334046
It's just a push button AR trigger group. Would guess it's a super safety

File: Steel__91180.jpg (416 KB, 960x1280)

416 KB JPG

Anybody get a 10/22 running? I'm trying to tune an sls lever but i cant get a full reset.

>>64334724
Pay me double to ship you one of my spares

>>64335546
is there even a decent reliable mag for the 10/22 over 20 rounds?
like whats the point of forced fun if it's empty in like half a second

>>64331925
FAGGOT

File: 16.jpg (117 KB, 1271x871)

117 KB JPG

>>64335771
https://odysee.com/@Xenu:0/dr2cmirror:7
Cheaper and more reliable than a BX-25, 4x the capacity.

File: 1750000803469869.png (209 KB, 400x398)

209 KB PNG

>>64335808
this makes me hot and bothered
what spring does it take/where can i get one?
on that note, where can i get ppsh/suomi drum springs aswell because i need one

File: 9022.png (1.36 MB, 800x600)

1.36 MB PNG

>>64335771
Even if there was I doubt it would fit in my cope p90 stock.

>>64337752
>>64335808
All you have to do is extend the tower and add additional dummies to make up the height difference, easy shit, get on it.

>>64334046
>>64335382
I think its a cuckbreed
https://www.youtube.com/watch?v=sPO5Iyzr9K8

File: photo_2025-05-14_22-19-38.jpg (118 KB, 960x1280)

118 KB JPG

>>64335254
Yeah the AK FRT SS market is super underdeveloped, and IMO it is actually one of the most promising. My two position AK FRT has been working flawlessly for nearing 1200 rounds total, maybe 1300 actually I need to double check. The design of the cam is such that the force to actuate the reset is transferred through a very durable tough piece, as opposed to the lever designs for the AR platform. The trip bar which is arguably the weakest part is only subject to moderate forces.
I've got the three position function checking by hand decently well right now, so long as you don't crank down on the trigger to hard. Going to work on it more a bit here.

I don't know if AK receiver and carrier specs are tight enough in terms of tolerances, but matching the cam and trip bar to a particular spec fire control group, auto disconnector, and auto safety, for a near drop in three position AK FRT SS that keeps the original OG aesthetic... we're not far from that.

>>64338526
Very based. Will it use the OG safety selector?

Bump

bamp

>>64316894
FuddArms is now doing a big sale after r/fosscad was banned, got 2 S7 Hoffman SS for $64 each and free shipping, hell yeah

Promo code RIPREDDIT

Who makes the best SS jigs?

>>64342481
Nice.

Page 10 bump

The p90 frt, how it works is pretty interesting

So I know the one company got all these frt things legal but now are suing everyone for some bullshit patent infringement stuff. How glowing are all these companies popping up trying to get me to buy? I like my dog a lot.

>>64344527
All of the ones listed in the OP are gtg. Can personally vouch for Deez Nuts, got 2 and still have my dogs

>>64344558
Fair enough thanks, anyone heard of polymerpew? Not on the list obviously but have some interesting stuff

>>64344604
people on reddit said they were good to go

>>64344527
they're only suing companies that make FRTs for the AR15 as far as i can tell, since they think those are the only ones their patent can protect in the court of law (in spite of what the atf wants)

https://imperialarmsco.com/cypher-mtm-black-anodize-308/ just came in stock. Scar 17 go BRRRR

>>64344689
As someone who clearly hasn't been paying attention, why bother replying? RBT has been suing EVERYONE who makes FRTs or SSs of any kind. RBT believes their patents cover the UTILITY of forcing the reset of a trigger in a firearm. We'll see how all these lawsuits play out. I'm obviously in favor of RBT getting BTFO as the newer stuff is better and lower priced than the RBT cassette.

Just to verify, if I plan to use a rifle buffer lower and a 20in rifle gas upper, there should be little to no "tinkering" to make a standard super safety work, correct? It's only carbine gas/buffers that you need to experiment with?

>>64346868
i have been paying attention, selling AR FRTs are the only commonality i can see between the stores getting sued, and theres stores that arent getting sued which developed their own shit
if i'm wrong then correct me, but show me the stores with non-AR FRTs that are getting sued
also i'm not defending RBT i hope they eat shit, i'm just telling you what i know

>>64342481
Thanks!

>>64347725
My dissaptor ran perfect with the rifle buffer that was in it with my super safety.

>>64348580
Forgot to mention im running an anderson dissaptor barrel with a rifle lenght gas system

>>64346578
damn how long did the restock take? like a year?

>>64330791
If you can into 3dpd, maybe look into the nylaug, could modify one of those instead of your own stuck

>>64342481
Me here, I went back after this and ordered five with cut triggers for a little over $400 lmao
>>64348195
Happy help fren

Can we start these threads with an updated list of all the guns you can get a fart sausage for?

>ARs (with FA type bolt)
>mp5 (with an ar style or that 3d printed lower)
>tx22
>ak is WIP?
>Aug is WIP too (and you have to drill the stock or something)
>???

>>64350465
I'll give it a go. For brevity's sake:
In development or planning = no working prototype
Prototype =late development with functional prototype confirmed shooting on video
Pre-production = as above, release imminent
Feel free to edit/collate this, make it into a graph, etc I dgaf

AR's - SS (and ARC) + FRT (RBT, Atrius) all 3 pos - all released
>All DI AR's in any caliber with a F/A cut carrier.
>AR-10's work as well but need a lever sleeve
>Bufferless DI like Foxtrot mikes needs some tinkering

Piston AR's as above - NO ATRIUS
>MR556, BRN-4, MR556A4, Wolf T91, LWRC
AR PCC's
>Most of the non blowback delayed options work with SS or FRT with minor levels of tinkering
>Some blowbacks work YMMV

HK roller locks -

MP5 - SS and ARC only - needs dedicated AR trigger compat lower designed for SS use like Leber v2 or ARMP5v3 and a trip behind bolt.
UNRELEASED - drop in FRT packs for conventional HK lowers - an independent dev group has just PROTOTYPED + RBT has promised this would be their next trigger but are still in PLANNING
>MP5 and MP5K compatible
>MKE, HK, MAC, POF, PTR, Dakota arms compatible
>unknown status on older coharie and vector arms Todd Bailey specials IMO they can go fuck themselves for owning that garbage

G3/HK51/PTR-91/AP51/HK91
PRE-PRODUCTION
UNRELEASED LOWER W/TRIP
SS or ARC in ASDesigns dedicated lower -trip mounted in lower. HK91 will not be compatible without modification.

HK33/AP53/C93/Dakota Arms 33
PRE-PRODUCTION
UNRELEASED - TRIP
SS and ARC with ASDesigns ARMP5 lower needed - current Leberv2 not compatible.
C93 compatibility UNKNOWN but assumed

HK11/HK21/HK23 Belt feds
PLANNING

Notes: neither of the MP5 HK lower compatible drop in pack FRT developers have confirmed capability with G3 or HK33 series

HK other:

UMP/USC .45ACP
PROTOTYPE

VP9
Planning

FN:
SCAR 17 + 16 - Released
SS (+ARC) and RBT FRT with respective TRIP + AR trigger compat lower required

PS90
PROTOTYPE

M249S
PROTOTYPE

M240S + OOW M240
EARLY PLANNING

>>64350654
Continued...
Further note on PROTOTYPES - some may as of recently already be 3d printable but no commercial metal models exist

3Dprint space - released:

MAC-10/11 - SS only
Requires printed AR trigger compat lower - several printed lowers available from minimalistic to the larger Mac daddy

Vz61 - SS in .22lr & .32acp ONLY
Printed AR trigger compat lower
Conventional lower FRT IN DEVELOPMENT

Other PCC's
Stribog (roller delayed only 9mm/10mm/.40/.45) - SS + ARC unreleased
PRE-PRODUCTION
requires dedicated AS designs lower - 2 trips required for both upper and lower.
Current AR trigger compat lowers are NO GO

Kuna - recent release
SS + ARC and Atrius
AR trigger compat lower and trip needed

Vector (9mm/10mm/.45)
Drop in dedicated 3pos FRT retains all controls
Pre-production

CZ Skorpion EVO
Protracted development - lol direct blowback. IMO sell yours today

B&T TP9 TMP
Early planning

B&T other PCC's like APC9
PROTOTYPE.

Kel Tec P50/R50
Prototype- SS
ST Inc conversion lower only

Sorry, not sorry - never getting a FRT tier:
All other Ruger, S&W and Keltec PCC's. Don't direct blowback kiddos

Rifles OTHER:

AK series including AK PCC's
RELEASED
- 2 position (SAFE and FRT) FRT - several different models including AKSS.
Some compatibility issues, but most models work with varying degrees of modification.
UNRELEASED prototypes - 3 pos out of box
Forward - current 2pos can be made aproper 3pos with F/A disconnector + sear, F/A safety lever unit I believe - legally dubious, not a huge AK guy so reference the AKfrt communities.

B&T rifles like APC223
PROTOTYPE

BREN-2
PLANNING

BRN-180
PLANNING

JAKL .223/.300
RELEASED - SS, ARC
requires slip trip and replacing rear reciever block
.308 JAKL- SS + ARC PROTOTYPE

AUG - RELEASED
3 position pack + trip with stock drilling for selector extension
Will function as 2pos if selector extension not installed ie don't want to drill.

>>64350732
>AUG - RELEASED
Whomst?
Also tfw no saiga 12 gauge ss

>>64350732
Continued...

Pistols:
2 position (SEMI/FRT):

M&P 2.0 (9mm/10mm/.40/.45)
PRE-PRODUCTION

Glock
Protracted development - mood is swinging to dedicated frame (printable)

No position - FRT ONLY

M&P 2.0 - released

TX22 - released and fun as fuck boiii

Glock - released - several models - all are jank and do not recommend. I'm sorry glock guys wait for 2pos or look elsewhere like the MAC's with glock mag AR trigger compat lowers

PSA Rock 5.7
Planning

P320 & P365
Early Planning - driven by large amount of pcc conversions

.22LR other

10/22 - 2 position (SAFE/FRT) RELEASED
kind of jank tbqh senpai - newer metal option improves things but performance is less that satisfactory

AR-22 - released - SS, ARC, FRT, Atrius
The gold standard in .22 frt long as.
Includes CMMG conversion bolts and dedicated uppers
Requires trip

SHOTGUN??!!!!
AKSS functions with some modification in AK shotguns

>>64350739
https://www.augfrt.com/s/shop

Also YES on the S12 - see below.

>>64350761
Almost forgot FUCK

Beretta 92
Prototype nopos FRT only

Any others I missed feel free to add

>>64350465
The AUG FRT is extremely well developed and is the best entirely non AR/AR compat FRT out there.
Drilling really isn't a big deal tbqh and it's not even required for 2pos function. More importantly I've heard of absolutely no issues with the AUG FRT and it's compatible with the Ratworx 20/20 and the Steyr red spring kit
Getting a selector anywhere else but the rear is going to be extremely Protracted and likely require parts sampling from the already incredibly rare ALO AUG's (Automatic Lock Out) used by Ireland and Australia Or parts from the F90. A progressive trigger FRT with the ALO or a crossbolt frt replacing the safety would rock but it's also going to be a severe hurdle

>>64350465
glock
m&p
scar 17
ruger 10/22
mat-9 in the works
ps90 in the works
beretta 90 series in the works
vector in the works
everything that as designs in the works (lot of stuff there)
I saw a lwrc smg 45 have a trip in which allowed an frt to be installed
PSA 5.7 Rock is in the works
same guy that was doing the ps90 said he got the TP9 working

>>64335808
speaking of the 10/22, are there detailed drawings of the magwell somewhere? I player around with drawing something for it, but measuring existing mags with calipers is less than ideal. I searched around a while back but came up empty

File: 20250716_140346.jpg (13 KB, 236x212)

13 KB JPG

>>64350763
>$750 big ones for the upgraded trigger
I hope these get cheaper in the future... That's half an AUG worth of $ right there.

If i wanted to FRTize a one or the other, which should I get between an MP5 clone or Vector?
>MP5
>requires buying an additional 3d printed lower
>older design
>Vector
>pretty sure the trigger is drop in, but the company hasn't reopened orders yet
>more modern

>>64350916
$750 gets you a full printed pack ready to go with ratworx 20/20. Personally I recommend against the Ratworx anyway because it compromises drop safety and the Steyr red springs and trigger linkage tuning gets you 90% of the way there anyway. The red springs also reduce the force needed to manipulate the charging handle as an added bonus

$200 gets you the parts to drop in your own pack

>>64351454
All the vectors, regardless of caliber, have very high rate rates of fire with FRT.

The MP5 has a plethora of modernization options, cheaper mags, great irons and a manageable RoF with SS/ARC.

If 9mm then MP5 hands down
If .45 then vector hands down
If .40 or 10mm either vector or Stribog
Bog's have a slower more managable RoF when FRT'd however they need 2 trips to function.

UMP will be another, niche, option for .45 but you'd be getting much, much slower RoF in exchange for substantially worse recoil and higher costs even with the new S5 tactical UMP's at $1900
.40 & 10mm MP5 aren't working with FRT yet and limited to high dollar custom builds like Dakota

>>64350654
It's going to be more economical to convert a PTR-91/G3/HK91/AP51 to a HK21 and you can easily get the HK23 conversion kit for ~2000

This means you can be slinging .308 in a belt fed for less than a M249S + lower.
And the HK23 conversion means substantially less than owning a M249S and M240S.

Forward on the Belt Fed AR uppers.

Lima6 running like clock work with SS/ARC, Atrius and RBT FRT

Fightlite MCR's choking hard

>>64350916
You don't want the Ratworx in your AUG

>>64352402
B&T APC45 (soon) and MAC-10 (printed lower, out now - G21 or MAC mags) are 2 other options for .45.
Both have a high RoF and would get absolutely mogged by the Vector in controllability

>>64352402
stribog in .45 is the only gun I know that's roller delayed as well

>>64352499
The one plus to the Bog is a conventional design (UMP at home but actually better) with much simpler internals - the roller delayed system in the Bog (Kuna copied it) is extremely simple compared to HK roller designs but it reaps most of the benefits - IMO it's so well done HK should fucking kneel and update their UMP's with it.
.45ACP and 10mm aren't cheap so the slower RoF with FRT is another boon for the Bog.
On the 2 slip trip issue - the dedicated FRT lower (ASdesigns SS/ARC) will house a trip in the lower that needs to interface with a 2nd trip in the upper reciever. These lowers will come in either Glock mag (G20/G21) or UMP mag

>>64352569
i just hate their fucking billboard of a logo on the side on the receiver

File: berettam9.png (552 KB, 720x541)

552 KB PNG

>>64317759
I just saw this the other day on youtube. I don't own an M9 yet but I may well preorder this for shits and gigs

>>64352499
Roller delaying is why the Stribog takes the cake in 10mm also - its incredibly controllable -it accomplishes what the MP5/10 failed to do and is going to be radically improved over a 10mm UMP without the very high RoF that a 10mm Vector has with FRT

>>64352617
Agreed fucking eastern euros
Use a black sharpie

>>64352569
Kuna (9mm only) is FRT ready & released - requires a AR trigger compatible lower, either a SS, ARC or a Atrius and a single slip trip.
It is a copy of the roller delayed Stribog design but the bolt is shorter with different bolt geometry on the bottom - as it was meant to be shorter/more compact than the Stribog 9mm.

IMO it offers no advantages over an MP5 - the simplified roller delaying of the Bog and Kuna reaps most but not all of the advantages of the HK rollers. The HK's are capable of much more fine tuning between locking piece and rollers and camn be tuned better as they wear because ultimately bolt gap is adjustable.

Kuna is cool but it just doesn't make economic sense in a world of $1000 MP5's

>>64352622
I love how the first hammer fired FRT (I know I'm discounting the 1911 FRT from the 1930's but this is DA/SA) is a Beretta 92.... in a world where it's replacement is shitting the bed

>>64317759
Pistol FRTs seem silly unless they have a sort of chassis system. Does anything exist for the 92? Alternatively is there a foregrip thingy like the 93r has but for the 92?

>>64352777
I Should grab a recover tactical brace for my g40 and put a glock frt in it. 10mm fully semiautomatic sounds retarded

File: white.png (1.38 MB, 1202x802)

1.38 MB PNG

there was a FRT / "trigger modifying" ban bill in the Pennsylvania House this week. They failed to even bring it to a vote
the 'red flag law' and '1 gun a month 'did made it but both bills failed. this is a democratic majority house too
i love PA

>>64352622
getting me a 96 slide for my 92 frame for the frt. I have a lot of .40 hanging around

>>64353723
IMO wait. Current glock FRT's suck donkey dicks

>>64350732
There was a working prototype MG42 SS setup with a custom lower

>>64352777
Recover tactical, CAA macaRONI and the IWI/Zahal Kidon.
RONI for the 92 might be outta production tho

File: 1740516640007023.png (80 KB, 800x825)

80 KB PNG

>>64353788
I saw an article about this online. I thought the "machine gun conversion" ban made it out of the PA house, but the other bills were defeated. It started off as a Glock switch ban, but they added a bunch of other language to it that would cover things like frt's, ss, and maybe binary triggers. It's stupid, because Glock switches are already arguably illegal under Pa law - see 18 Pa.C.S.A. 908- Prohibited Offensive Weapons. The way that statute reads is that machine guns are illegal, but if they otherwise comply with federal law, then they are legal. It used to ban switchblade knives, but they got legalized within the past couple years, probably because too many of the usual suspects got caught with them.
Even if they made it out of the house, the PA Senate has a very slight Republican majority.
I plan on buying a few things in Minecraft because of this nonsense. Buy them before they are banned!
I love PA too. I hate the liberals in Pittsburgh and Philadelphia.
>t. PAfag

File: Cracked Tec-9 DO NOT RUN (...).jpg (233 KB, 1280x960)

233 KB JPG

Anyone developing one for older platforms like the TEC 9?

File: 1672018951305414m.jpg (137 KB, 914x1024)

137 KB JPG

>>64317759
That dude is a Kommando, great guy

>>64317759
we need a 93r

>>64350761
>P320 & P365
>Early Planning - driven by large amount of pcc conversions
already fully prototyped with no jank. I am waiting for the ATF letter. my lawyers are taking fuckin' forever. i have to cattle prod them again. already in talks with companies.
>Inb4 where video
not yet.

>>64356967
you can print a lower that looks like one

Best H3 buffer?

>>64316894

SHOTGUN BOIS REJOICE

>>64350761
>>64350739
JTS AR-12 works with the Super Safety and it's fucking bonkers
https://youtube.com/shorts/7tV5xki6q0A?si=9c6AwKEyRNEiQLdH

>Genesis at home

>>64352777
There's a pretty sikkk MP7 style chassis for the TX22

>>64335087
https://web.archive.org/web/20250328163706/https://greymarketresearch.net/m508-308-info-and-instructions/

>>64359785
AR-12s seem cool in concept, but are there any that aren't hot turk garbage?

File: PXL_20251004_230324205.jpg (1.69 MB, 4032x2268)

1.69 MB JPG

>>64332029
I have a suomi id be willing to molest for this project, if you want to get in touch I can be the test mule and feedback man. Indy ordinance build with slight modifications (better trigger, can get through a full mag, etc)

>>64332029
>dont have an out of battery,
Professional retard here: it was my understanding that the purpose of being super safe is that out of battery was mitigated by the existing safety mechanisms of the fire I'm not letting the trigger actually actuate out of battery?

>>64359865
I'd be open to that, but I wouldn't want to take your gun now until i finish my other projects and have time for it
And it might already take a few months from start to finish to design one for it even with nothing else to work on, so it might just be better to build one myself
>>64359886
Not every FRT can work that way is the thing, or atleast it can require gun modification in order to do it on some guns

File: disconnector.png (488 KB, 1280x1280)

488 KB PNG

my new super safe rifle was firing on trigger reset while on semi. i compared it to my other lower that doesn't have this issue and found the disconnector wasn't camming forward enough so was barely engaging with the hammer (green line is where the good one was contacing, red line the bad). i dremel'd the front bottom of the disconnector (lower red line) to let it rotate forward more and that seems to have fixed the issue, at least dry firing. hopefully the thinner tip doesn't break. if it does i'll get another and try taking some metal off the trigger where that part contacts

super safe mode ran normally

>>64359886
ar9s and ar22s can have oob

>>64360224
never seen that before, interesting

File: gmr trigger mod.png (824 KB, 720x1640)

824 KB PNG

>>64360229
i actually found the fix from a forum post from years ago of someone without a super safey . i guess my disconnector just didn't fit well with the trigger that came with my ss kit
i also had to do picrel to get it working when i first installed the kit

>>64360245
where did you get the disconnector from? was it out of spec?

>>64346578
So do I just need to get their bolt, trip kit, lower, and then find a FRT15L3 for the scar17? I wasn't aware we could get our scars to frt yet I've been using ARs. I'm hesitant to order a trigger pack because I only know how to use Super safe and I'm clueless on how to repair it if it breaks

File: gmr flat trigger.png (971 KB, 760x617)

971 KB PNG

it was from a cmmg parts kit, and it functioned normally until i swapped in the ss kit trigger
i don't know if it was out of spec. i think it's more likely the trigger is, i don't know the manufacturer

I bought a couple Serpico FRTs to drop in some glocks. I’ll most likely buy a 76% kit or whatever the fuck % is still good to go with the ATFs 80% bullshit just so I have a regular frame to throw the slide on when I want to go to the indoor range

>>64360413
I like my Serpico FRT, got it in my g36 gen 3. Had a blast shooting it about a week ago with my obsidian 45 on it as well. Probably went though like 300 rounds or something. I also didnt have to trim the trip, not saying you wouldnt have to, just thought it was interesting.

>>64360423
I’ve got a gen 1 and a gen 4 17 they will be going in. I’m guessing if anything needs extra work to make it fit it’ll be the gen 1. The hardest part is trying to decide on a brace kit to build a legally not a SMG

>>64360473
you can get a b&t glock chassis and change the stock to a brace from a3 tactical

>>64358398
Plz post vid so can confirm

>>64359785
>>64359831
Is the JTS 12g AK working with the AKSS?

>>64360515
Definitely a contender. I had been leaning towards the recover tactical kit but the B&T might take its place.

File: lwrcsmg45frt.mp4 (2.4 MB, 1080x1920)

2.4 MB MP4

>>64350815
video of the lwrc smg 45 with a trip for the DDT FRT

Still being worked on by the developer

File: PXL_20250406_234700140~2.jpg (3.74 MB, 2862x2935)

3.74 MB JPG

Made a little progress on the three position AK FRT SS.

Added quite a bit of gas and spring, and it still doesn't cycle reliably. I think the trigger bar ramp wore down a bit as in FRT SS mode right now I'm getting hammer follow, as in the reset isn't large enough in amplitude to catch the hammer on the front main trigger hook, and or the trigger finger pressure plus the cam profile plus the trigger bar ramp profile is unlocking the cam and trigger before the trip bar does its job.

https://streamable.com/qtkpjb

Going to keep at it.

Just for a sanity check I ran the Romanian PM md. 90 SBR again, 70 rounds flawless, lots of trigger finger pressure, didn't lock up or slow down at all really. That setup works well.

>>64350732
There was a early prototype for the EVO but it FAILED the OOB test, repeatedly

>>64361527
thanks for following up, love seeing stuff like this

>>64360376
you don't need their bolt, just the modification to your current carrier which they do for $129. The rare breed trigger pack is self contained and you should have to worry about it breaking. It comes with everything you need. I just got my lower in today and the rest of the parts to finish off my lower should arrive tomorrow. I will have a range report probably by Sunday on how well it works. the downside to all of it is that if starting with only a scar 17, it costs about 1300. Depending on how everything works, I might look into selling my lower with a g$ trigger and the 8 or 10 scar mags I have to recoup the costs.

File: images.jpg (10 KB, 201x251)

10 KB JPG

>>64360224
went back to the range today and it's running properly, mostly. i may have taken a hair too much off the disconnector because a couple of times when i let off the trigger the reset hung up for like a quarter to half second before the disconnector let go of the hammer. no malfunctions though, the thinned disconnector hasn't broken after about 150 rounds and 3 of the mags were full ss dumps
so far so good

>>64363235
>ruining your guns
how do you even fuck up that badly with a dremel
like i was able to make a perfect feed ramp that was 1:1 with the original on a demilled kit build with almost no gunsmithing experience using a dremel, along with smoothing out and de-burring several slots on the gun

>>64363287
rotary tools can do a lot of damage very quickly in the hands of the inept, clumsy, or inebriated

>>64360853
that thing runs fast as hell

File: iu[1].jpg (2.02 MB, 4032x3024)

2.02 MB JPG

CZ75 FRT when? CZ did make a machine pistol off of the CZ75

I'm not trying to fear monger or be negative, frankly I love the SS and I have 4. But, what are we thinking the feds or atf are planning? Are they really cool with everyone just sidestepping the registry? I know we have the FRT settlement and there's a precedent now that the SS is good to go. But what happens when we get the first high profile incident with something super safe? I know gun control is radioactive politically right now, do we think the feds have washed their hands of it entirely? Is it likely to just be a state issue?
>>64324475
I'm already planning a move back west from the east coast to NM for the climate and access to BLM land.

File: PXL_20251004_201402709.MA(...).jpg (2.44 MB, 3000x4000)

2.44 MB JPG

Pic related: New supposedly D2 tool steel DLC coated AK trip bar for 1.5mm thick receivers (RPK, Zastava etc). Front edge of the trip bar where the carrier grabs it and pushes it forward rounded off within just a handful of racks. I think it might be poor material, not sure.
>>64365937
>first high profile incident with something super safe
IMO we're in a race against time right now. We need FRT and SS systems and products to be developed across as many platforms as possible, and for them to be made as functional, reliable, and durable as possible, to help motivate maximum adoption and market penetration. The more law abiding serious and even casual gun owners have them, the more proliferation and value owners see in the devices, but most importantly in the US political and legal system, the MORE MONEY that is in the space, the better the chances are that FRT and SS will survive the inevitable FRT/SS Mandalay Bay (COMPED SUSHI).

So show your friends, chat about it at the gun shop. Buy new models and support the businesses. I have A LOT of gripes with Atrius for example. A LOT. But I'm intentionally keeping my mouth shut because I think overall them doing what they're doing is a net good. We can polish off the designs later.
>to NM
Ey fucker whats good. Hit me up if you want, always looking for /k/ommandos to shoot with
@regulatedarmament

>>64366598
what do you show/tell fudds who think you are making full auto shit and would rather try and report you to the atf instead of have fun? That's part of why I'm hesitant to share this stuff.

bap

File: PXL_20250805_161031947.PO(...).jpg (1.18 MB, 4000x3000)

1.18 MB JPG

>>64366598
I've not shot this much at all this year, but recently I've came out a few times to some actual outdoor ranges (not BLM land) testing my Arizona Regulator FRT, and I know for sure I've probably helped sell at least 3-4 of them. The 3 position FRTs are absolutely the way to go, and made these go from novelty toys like bumpstocks to something way more practical that everybody can see the utility in. I will let anybody shoot my stuff with FRTs (with their own ammo) in hopes to convert them over. I hope that before the next mossad event half the rifle owning population has at least one FRT in at least one rifle they own or better.

File: 1732918305479713.jpg (1.02 MB, 1800x1801)

1.02 MB JPG

>>64369111
Hope you're well man, glad to hear you're still kicking and breathing and having fun. Fond memories 6 years ago now grabbing food together. Reach out any time you're coming through Albuquerque and I'll do the same in your neck of the woods.
>novelty toys
I like to hope that the only reason bumpstocks got removed from the menu post the oh so very real and tragic Mandalay Bay was that them being functionally such poor auto facsimiles made it so that few people were actually upset with their being banned except those that stood for the 2nd amendment purely on principle, which of course is a smaller minority than the larger 2A population.

I also try to give out free FRT SS rides and spread the good word as I can.

File: PXL_20251008_010509339.jpg (3.53 MB, 3472x4624)

3.53 MB JPG

Sad to see the as ARC was pushed to mid October. Looking forward to taking this out.

Scar 17S,

I know for you to install an FRT you need a lower that allows a ar fcg to be installed, like from Imperial Arms. However does the Scar lower from lingle also work?

Yes I know you also need a trip and the bolt.

>>64369691
I don't know about the lingle one, but the imperial arms one has a special track for the trip kit to sit on.

File: tfb-review-lingle-industr(...).jpg (78 KB, 720x540)

78 KB JPG

>>64369770
lingle does too, but just because it's there, doesnt mean it works, you know?

Guys is an m4 with a pre installed super safety for 750 bucks a good deal?

>>64369806
what do you mean by m4? need more information on the parts

File: Screenshot 2025-10-06 085233.png (71 KB, 385x438)

71 KB PNG

>>64369258
Yeah man, same offer goes out to you if you're out here in Arizona again. It's good to see you're working on AK related stuff, which obviously poses even more difficulties than AR shit just related to the tolerances across the board. You can't even just drop an aftermarket standard trigger in an AK without expecting to do some type of fitting, so a mass solution (especially a 3 position one) is probably going to be a task. I've yet to use any of them yet.

I'm toing to try to get my hands on an Arc-Fire and a Reset Ninja trigger, which seems to be a similar design to the Arc-fire just to see how they do against the Arizona Regulator. The Regulator works very reliably, but I noticed that unless you use a can, the rate of fire is way slower than a standard select fire M4 or M16, it feels like 550-650 RPM, but with a can it boosts it back up to 700-750ish. I'm wondering if it's just how it goes with that design. I've not tried a Rare Breed or Super Safety yet.

>>64371912
>Reset Ninja trigger
I'm not finding information about this, what is this?

File: 1000011565.jpg (20 KB, 760x508)

20 KB JPG

>>64370048
It had an m16 a4 hand guard, 16 ish inch barrel, an adjustable colt m4 stock, and no magazine or rear iron sight. But it did come with a holographic sight not sure what make or model on the parts though.

It looked like pic related without the fore grip, magazine, back iron sight, or that muzzle attachment

File: 547663487_122143836062673(...).jpg (70 KB, 940x788)

70 KB JPG

>>64371991
https://resetninja.com/

so apparently the site is down, that's not a good sign. Maybe it was resetnigger, idk. Basically it's as pictured from that screencap I gave, basically looks like the arcfire, but they just don't supply you a FCG. Hopefully they didn't get smoked or weren't just a scam.

>>64372340
im thinking scam

File: ChatGPT Image Apr 13, 202(...).png (2.04 MB, 1024x1024)

2.04 MB PNG

>>64372349
the email confirmation I got was from "sales@battlepro.co", which seems like a 3rd party hole-in-the-wall vendor based in Maine. Worst case scenario in 3 weeks if I get no response or tracking info, I'll just put a claim in through my bank. If they ARE legit it basically seems like a direct knock-off of the Arc-Fire or one very similar, albeit about 25% less cost.

Atrius is still shipping their 3 position super safety right? Should I just cancel my order and give that money to GMR?

File: 20231013_082350__15260.16(...).jpg (147 KB, 1280x960)

147 KB JPG

>>64369777
There is no rail on the lingle one that is anything close to the one on the imperial arms co version.
>>64366598
hopefully its just a bad 1 off. I have a 23" vepr in 7x62x39 I would love to be able to toss a FRT in with a 40rd mag or drum.

>>64372769
>There is no rail on the lingle one that is anything close to the one on the imperial arms co version.
I see, thanks!

bedtime bump

>>64372305
if it's at least a d2 super safety then yeah sure

I personally would rather get my own SS because I would want it from greymarket or someplace I know to be good

Is a 1301 SS feasible? Or does the layout/takedown prevent this?

>>64371912
Looks like an Atrius - that arm is going to snap. I did peruse their website though they have normal super safeties, TX22, AK and Vz61 frts at decent prices.

>>64375848
Why tho? Mag fed shotguns I understand

>>64376202
>Why tho?
Cause the 1301 is fucking sick dude.
Unrelated question, removing the lever from a SS just makes it a regular ol push button safety right? Going to be driving through FL soon and want to stay kosher.

>>64376478
The cam is what resets the trigger. Removing the lever would leave the the mid position either with a locked trigger, or able to fire depending where the cam rotates to when you pull the trigger. So no, it wouldn't be a normal safety

>>64376638
But the safety position would work normally, and the SA position would work normally because the cam is moved out of the way when you slide the safety to SA

File: PhotoRoom-20250401_152933_1.png (1003 KB, 1947x1947)

1003 KB PNG

>>64376202
I know technically the ArcFire hasn't released yet, but from the photos we've seen would you say the same about that one as well in terms of the arm being likely to give out?

File: 1653997004967.jpg (122 KB, 375x500)

122 KB JPG

>>64376654
Yes .... but 'if caught', being less likely to get slapped with a felony charge, you 'will still' get a elbow deep cavity search.
AKA: the prison inspection search special or the PISS procedure.
Also.... Roadside searches are legal in Florida.
t.FHP Officer

File: IMG_1587.jpg (1.81 MB, 4997x2670)

1.81 MB JPG

>>64369258
>Colt HBAR 20”
>DNT SS
>rifle gas system
>A2 receiver extension
>standard recoil spring
>Kynshot RB5001 buffer

Fired 360 rounds today in testing. Mechanically no issues with the trigger itself, but did experience failure to feeds about 6 or 7 times. The BCG didn’t have enough ass to pick up the next round and return to battery, likely because of the added drag from the SS lever.

Experienced no issues at all when using 30 rounds PMAGs. I imagine that an increased power spring would assist the carrier through its hangups.

Biggest takeaway is that the kynshot buffer and rifle gas system slowed the ROF to a nice and cool 530 rpm.

File: IMG_3978.jpg (1.72 MB, 1170x1458)

1.72 MB JPG

Complete fucking noob here, what frt is the most polished/g2g and easy to do? I might be full of shit here but i kinda see more value in going for an frt in a belt fed or a smg vs converting an ar or ak to a frt stick

>>64335771
A neutralized threat which is what a weapon is for. Practicing with it is the fun part. Making shit for it is the fun part. Noone wants to have to use it to end a life.

>>64377087
currently the easiest is still the Delta/Rare Breed FRT trigger. There are some disadvantages though, it's several times the cost of other solutions, you cant customize the trigger and the mechanism can gum up and have to be cleaned every so often, but that depends on your shooting schedule and if you use a can or not. The advantages of it though is that it's the easiest to set up and it works with high shelf lowers.

ARC I'm thinking will be the best though whenever it comes out

>>64377109
you're missing the point entirely
magazines that empty that quickly arent that fun, gets old when you have to constantly load them back up at the range

>>64376962
>>64376962
>Roadside searches are legal in Florida.
Lol ok bud. Royer and Rodriguez would like a word with you.

Where the fuck do you find the M&P 2.0 FRT files? I must be full retard because I can't find shit on odysee, and I refuse to pay that faggot $250 for a part that can be printed

>>64378536
this?

https://odysee.com/@ToadLicker556:d/M-P-2.0---Freedom-Finger-reupload:1

>>64377309
I mean i get your point but I was addressing your question, not your point. I understand that emptying a mag or clip in 2 seconds is comparable to wasting 200 american dollars. Or a different kind of waste. And I agree with you. So shooting that fast is a novelty at best. Its fun. But if you can control that novelty. Oh boy.

Link to vz61 frt (.32)? I cant find it anywhere. Also where can i learn more about the ps90 frt?

>>64376901
ARC doesn't have the sideways bent lever that the atrius has and the lever is just substantially thicker. If ARC is going to fail anywhere its either going to be improper heat treat/metallurgy or in the ratchet arrangement where the selector and lever mate - I could see crud getting feasibly getting in there impeding operation

>>64380000
Reset ninja for one

>>64380434
Are there any that work with the standard lower and not 3d printed ones?

File: P320 Pic_40.jpg (3.4 MB, 4032x2268)

3.4 MB JPG

>>64360518
Soon(TM)

>>64380602
No there isnt (but a bounty is out for pne that will work with a rate reducer), but the current one works with any ar compatible lower,

Could you slow down a SS to something like 300 rpm or slower? Will adjusting gas/buffer weight/buffer spring get you there or would you just end up with malfunctions?

>>64381573
I’ve got mine down to 530, I’ve seen some builds pushing 500 with gas and buffer systems changes. Not sure about much slower than that.

Has there been any relevant news, or has it been all quiet recently? In terms of firearm laws.

>>64380753
You got a site up for it? Post an announcement when you do por favor, gonna need one for my raider. Have you tested it in a raider before? Don't see how it would cause any issues but thought I'd ask

>>64381580
What's your setup? Heaviest buffer and venting as much gas as possible?

>>64381580
What length gas system?

saving this bread for tomorrow

Ran about 200 rounds through a Deez Nuts 4140 safety this weekend, once I put an h2 buffer in it ran flawlessly with no tuning for both of my suppressed setups.
Good shit, would recommend.

>>64382774
nice one, what upper receiver did you use? The are a lot of uppers that requires cutting the top of it for smooth operation. The ARC does not

Just bought a AK SS kit to make 3 POS, going to try it in about a month, but im sure it will be a nightmare to put together to get working. I wish there was more documentation out there instead of this black hole of knowledge

>>64381615
>>64382521
See >>64377019

When I’m back from deer camp I might be able to upload a video.

Rifle length gas and the heaviest hydraulic buffer I could get.

>>64383107
Please document the process anon. What kind of AK are you working with? I've been wanting to super safe my Zastava M70, but I feel like it would be even harder since it is different from standard AK.

>>64383648
WASR-10, I heard it's one of the easiest to get going

>>64381605
no reason it wouldnt work in any chassis. getting some new parts made so I can pair it with the raider and such. the SMC bravo was cheaper so that's why I used it, but still very good. 1200+ rounds with the short barrel and it's still intact. announcement in good time.

dont die

File: ps90.webm (586 KB, 1280x720)

586 KB WEBM

>>64380000
>Also where can i learn more about the ps90 frt
was on r/fosscad but that's gone now and I cant find the post

Basically how this one worked was that it utilized the progressive trigger of the PS90 in which it's still two position, safe and semi, but a light touch made it super safe and a hard touch made it single shot mode. According to the guy making it, it was designed this way because he was unsure if it was considered a machine gun or something with a normal configuration

There seems to be another company making it that seems to be working as you would think and according to a comment, it would require a new selector which makes sense. Looks like the same company that's doing the vector frt

I'll see if I can find more information but with the closure of r/fosscad, getting info is a lot harder now

>>64387899
also it looks like the same company is also making one for the cz scorpion, pretty neat

Wake up babe new FRT dropped https://arizonaregulator.com/

>>64388465
>NO ONE DARED TO ASK HIS BUSINESS NO ONE DARED TO MAKE A SLIP

>>64388465
the market is getting competitive which is awesome

>>64388578
It's pretty cool since its apparently a drop in. I'd like to buy one but had to buy a new phone recently and I already have two Deez Nuts triggers.

>>64388578
Competition = proliferation
Proliferation = common use
And the bright side there is once we're at common use, If the NFA gets deboonked SS/FRT's aren't some gay shit like bumpstocks or crank triggers - there's still utility there

>>64388465
>3 position only works with their trigger

Damn. At least I can use an ambi safety

Talk to me like I'm a clueless pleb. What's the point of all the expensive FRT options when a SS for like $70 does the same thing?

>>64389039
it said on the page that it worked with larue, no?

>>64389575
SS requires a low shelf lower, sometimes the upper needs trimming and you have to cut the trigger

The other FRT options while expensive and imo not worth it, there are still advantages.
you can use a FRT in any shelf lower and it's truly retard proof to install.

I agree with you that SS is way better though

sneed

File: 55-32.png (1.25 MB, 1918x854)

1.25 MB PNG

A man from Washington, D.C., is facing machine gun charges after visiting a Northern Virginia gun range with a 3D printed forced reset trigger

>On Sept 22, 2025, Erez Avissar of Washington, D.C., rented a rifle from Silver Eagle Group (SEG) in Ashburn, VA. He took the gun into a shooting bay and proceeded to disassemble it. A SEG range safety officer (RSO) approached him and inquired about what he was doing. The man responded that he was testing out an FRT that didn’t work in his rifle. The RSO asked him where he got the FRT from, and the man told him that he 3D printed it. FRTs violate SEG’s policy, and he is also not allowed to modify rental guns. The RSO canceled his rental, and he was “sent on his way.” He was a member for six months at the time of the incident.
>Four days later, someone made an anonymous text tip to the Metropolitan Police Department (MPD) reporting that Avissar had an FRT.
>The case was assigned to MPD Investigator Keleman, who stated that an,

"FRT can convert a semi-automatic firearm to a fully automatic firearm."

>On October 1, Investigator Keleman applied for and received a search warrant
>“knock-and-announce” raid on the studio apartment of Avissar, where he lived alone. The suspect did not answer the door, so MPD forced entry into the dwelling and detained Avissar without incident.
>PD found several FRTs in plain sight next to the suspect’s bed. Due to the FRTs, Sgt. Possinger requested an addendum search warrant to seize all electronic devices. The addendum was approved on the same day by Judge Todd Edelman. Police recovered multiple firearms, a 3D printer, filament, five SD cards, four USB drives, two laptops, three electronic storage banks, and one cell phone.

https://www.ammoland.com/2025/10/man-faces-machine-gun-charges-for-owning-a-forced-reset-trigger/

>>64392663
Everyone apologize to me right now for shitting on me when I said non-Rarebreed triggers are still a legal gray area

>>64392663
>brought a fart to an indoor range
>rented a gun
>started fucking with it in front of the RSO
>straight up told the RSO he was fucking with the gun AND told the RSO he was putting a fart in it
What in the unholy fuck compels someone to do this?

>>64316894
>"low shelf" lower receiver
retard tier question here: will the SS work in an M16 pocket or does the shelf have to be there for it to work right?

>>64393623
it'll work, but you probably would need a centering block as well, a lot of kits have the block included. you can also use an earbud over the lever

>>64392738
Autism

>>64392738
Dude was retarded. Even if everything works out, I bet he's having a terrible time in jail rn. You couldn't pay me enough to be in his shoes.

>>64331925
the tranny shooter that shot up the catholic church used one and nothing happened.

>>64392663
>Investigator Allorie Keleman, who stated that an FRT can convert a semi-automatic firearm to a fully automatic firearm.
>>64392710
Y'all, y'all goin to jaol.

With the precedent for an amnesty period for SBR registration, think there's any chance they open the MG registry and have an amnesty period for FRT/SS if they take steps to pursue FRT/SS as MGs?

>>64396079
>open the registry
Lol. Lmao even.

>>64396277
Just saying, if they were willing to allow SBR filing w/o the tax opening the registry might be the only option to get mass compliance. If they just say "FRT/SS illegal now!" There's going to be mass noncompliance.

>>64388465
Even though that page is boomer schizo vomit, that's pretty slick.

Scar 17 FRT worked really well. Most of the time I was shooting off a bipod. Had to tighten the mag release a decent amount as I had a mag or two that would unseat itself, though it could have just been a mag issue.

>>64392710
>D.C. metro police
No shit they'd charge a non-nigger with any gun crime they can pull out of their asses. Doesn't mean FRTs by and large are illegal.

>>64396079
Open the registry and just have thousands or millions of people registering actual machine guns? I doubt it.

>>64396557
using an imperial arms lower?

>>64396651
You're probably right. I just don't see a way they can actually ban/criminalize FRT/SS after Garland and most recently the Rare Breed deal.
Will the feds really just let us be? I can't see them criminalizing without some sort of legitimacy.
I guess they could ban "trigger assistance devices" but even that kind of falls apart when you measure it.

>>64396952
there are states that already ban it though and can just follow their wording. iirc Florida bans FRTs/SS

>>64316894
Reminder your state is just one mass shooting away from banning these.
t. floridanigger

>>64396709
yes >>64369302

Also your attorney general is now Pam bondi you're fucked.

>>64397125
you have to use a FRT? you cant use a SS? would be cool to use an ARC with it and I wish the lowers weren't unobtainum that only goes on sale once a year

>>64397132
answering my own question here, it looks like the answer is yes

https://youtu.be/Lx2QJxSuJZY

I know asdesigns is working on the scar, I'll just wait on that

>>64397348
I wonder if they are using a link trip. I have an email from them from august saying the link kit will not work with super safeties. If it comes out that it does, I would love to put a SS in it and move my DTT back into my high shelf AR lower.

rip scar

>>64396079
IMO I think it's more likely that proliferation of FRT/SS = common use
When they eventually go after them, when they classify them as MG's the courts will decide that millions of MG's are in common use and then the NFA/Hughes can be ruled unconstitutional. This is the trap that a future dem administration is likely to fall into

File: IMG_1412.jpg (2.32 MB, 4163x1990)

2.32 MB JPG

Any word on a CP-33 super safety or FRT? Would bang in this gun

>>64396647
No. Fucking idiot. Oncs again you retards refuse to read. He was arrested because he had a NON-RAREBREED frt. Right now ONLY RAREBREED owners enjoy legal protections from prosecution. Please eead the settlement Rarebreed signsd with the govenrment.

>>64400413
someone posted on twitter they were working on one.

>>64400381
As much as I'd like it to be true, I don't think even 5% of gun owners in America will own a SS/FRT while there's this vague legal situation going on. Don't get me wrong, I bet there's a bunch out there but they're likely concentrated in the hands of a few gun owners when compared to the populace at large.

>>64400806
I read the settlement nigger, calm down.

>>64402003
What an obviously low IQ post that doesnt prove anything

File: FlamboyantUnderstatedGela(...).jpg (246 KB, 627x502)

246 KB JPG

MP5 vs AR with one of these puppies for home defense?

>>64402458
You misunderstood the point of my first post and sperged out, suck my dick.

yeah

>>64402463
My ptr91 had trouble with soft tip rounds getting caught on the feed ramp. Or whatever it is, technically. I imagine mp5 pattern would be pretty much the same, on account of it’s pretty much the same. I personally have no experience with the ar, but maybe it’s cheaper and easier to get an ar that will feed and fire soft tip/holow point rounds in quick succession reliably?

>>64402463
You might have a hard time with hollow points feeding since mp5s don't have feed ramps. Mine does not like flat nose rounds when you get to the last 10 or so rounds in the mag. The first 20 usually work fine. Ice heard of some people not having any issues with theirs or with certain mags.

File: sus_cow.webm (1.18 MB, 720x960)

1.18 MB WEBM

>>64402463
Are you implying you'd defend yourself with an FRT gun? I'm sure that'd go over well in court

>>64402463
just use a shotgun like everyone else

What’s the best place to get an FRT for my AR-15?

>>64404753
in the OP

How do I lower RoF as much as possible? Currently have an H3 buffer and flatwire spring. I'm considering getting either an adjustable BCG or riflespeed gas block.

>>64405757
probably lower the gas and get a delayed bcg like the surefire optimized bcg

I know Freedom Triggers isn't currently selling them due to GayTF, but does anyone here have an M&P trigger? How have they been for you? Also what's with this gay new captcha with the circles

>>64407203
>I know Freedom Triggers isn't currently selling them due to GayTF
they say they are waiting on their ATF determination letter. FFT says they have waited 5 months of a 6-9 month time frame.
I was told by some people I've met that since the new regime the ATF is much faster dealing with determinations and such. for some it was 2-3 months, im told. its all word of mouth but its hard to say how long they will drag their feet. then again the 2-3 months were just super safety sellers. who knows.

>>64407890
the government is shutdown

File: 1660671996045413.gif (3.6 MB, 300x300)

3.6 MB GIF

>>64407893
forgot. excuse the retardation.

bumpfire

>>64405757
get a lighter spring and a heavier buffer. cheapest solution. you could get a yhm suppressor gas block and drill it out yourself

>>64409143
you'd want to lower the gas on an adjustable gas block right?

>>64409158
yeah but adjustables suck

>>64409158
you could probably get away with using your oem spring with the heavier buffer you already have to lower the cyclic rate

>>64335771
I have an open bolt 10/22. It really kind of sucks. You can't switch it back to semi auto and the larger capacity mags have to be massaged to work. With a factory 10rd mag, it's almost like it shoots out a solid 8" stream of bullets. 10rd factory mags run flawlessly. The BX mags of 10-25 capacity have to be massaged. I run them up against a file the remove the top edge of the right side of the magazine. It seems like that part slows the bolt down and it will not strike the first round hard enough. With that top corner side ground off, a 25 round mag has to be fired in two or more bursts or it will get ahead of itself and jam.

any ideas if a pps43c could be frt'd?

Im one of the thread bakers and im thinking of removing https://www.deltateamtactical.com and https://www.tacswap.com. both dont deal with super safetys/FRTs primarily nor are they actively making them. What do you guys think?

>>64409427
yeah remove them, not really relevant. glock frts can be bought on ebay and you wouldnt list that right? same for tacswap. I dont think DTT will sell the frt anymore honestly and we all know it's rarebreed anyways

This shit should be illegal honestly. It's such an obvious cheeky fucking loophole

>>64409583
what do you think about braces vs stocks or p&w?

>>64409583
You're right, it should be illegal to restrict the God given rights of Americans to make them chase retarded loopholes.

>>64409583
Cope and seethe fudd. Your collection will be worthless soon

Sent from my iPhone

>>64409583
Trigger reset go brrrt

File: G3MsF3LWAAA1d8V.jpg (64 KB, 640x640)

64 KB JPG

>>64409583
What kind of bait is this, faggot?

File: PXL_20250327_034802730.jpg (2.64 MB, 4032x3024)

2.64 MB JPG

So I just want to put some info out there for you guys as I don't think I've seen anybody mention it before. For all of you guys who are paranoid (and somewhat rightly so) about ordering any of this shit, myself and my friends who have ordered from Arizona Regulator have had the following positive experiences that may ease your paranoia: if you use his order form and send that in with a money order, he will send you your goods in usually about a week and a half to two weeks. It will come in a USPS priority box, and inside will be your original order form and envelope, he DOES NOT store your info or keep it around. AZ Regulator is based af and I highly recommend his FRT.

>>64410513
that's good information, you can't use a geissele right? you have to use the milspec it gives you? What about 9mm? I wonder if you dont have to cut the bolt like you do for the SS.

File: Polish_20250518_042738440.jpg (65 KB, 925x925)

65 KB JPG

>>64410686
As of right now AFAIK the 3 position variant (which I'm assuming is the one most people will want) is only available with a milspec trigger. He offers the 2 position one in 3 variants to work with a Geissele, Larue or milspec trigger, but if you get the AZ-15A1 (3 pos) it comes with the "reset pack" mechanism, as well as a full auto selector, trigger and disconnector, and a semi auto hammer. The trigger he uses feels like a Schmidt or a Colt, and once you start shooting it it already starts feeling pretty good. On his website he says he got his 9mm Colt mag type lower to function with it as well. I don't recall reading about any cutting on the 9mm parts at all, and there's no modification needed for any of the 5.56 triggers except maybe some filing on the reset dingus on the pack for fitment if needed. Coltfags like me are SOL unless you mill out the trigger pocket to low shelf/m16 spec, which I'm going to start getting ready to do, as what I'd like to do is just have the AZ Regulator trigger spec in every rifle I have, and just dump in the reset mechanism into the gun I want to shoot at the time.

>>64411341
you still need a low shelf? that's stinks but still super cool. I'll likely pick one up as well, I love new innovation in this space

>>64365937
>But, what are we thinking the feds or atf are planning? Are they really cool with everyone just sidestepping the registry? I know we have the FRT settlement and there's a precedent now that the SS is good to go.
Since when has there been any "precedent" about the SS, by which I presume you mean the Hoffman Super Safety?

The only court case so far was Rare Breed and that ended in a settlement. There is no guarantee that any other design wouldn't have to go to trial, but it's likely that the Rare Breed case could be cited to any non-ideologue judge to get him to back off.

As far as what the feds are "planning", obviously half of the feds are seething, and the other half are just "I don't wanna touch this issue because I'll lose the next election". Trump seems to have figured out that he pissed off half his base with the bumpstock and red flag law stuff, so he's not likely to push for another "just ban them and figure out the words later".

Do FRTs work on AR10s yet? I wanna have an “M240 at home”. [spoiler] no, I’m not glowing.

>>64412930
grey market seems to be the only seller of ar10 SS, otherwise I do not believe so

File: output.webm (1.24 MB, 1080x1080)

1.24 MB WEBM

RIP the Scar…. But here’s the ScARC

>>64388465
>>64396456
The guy running that shop really is batshit insane in my unprofessional opinion.

>>64392710
No, you still deserve to be shit upon. The guy was being charged under a state ban on forced-reset triggers, not on NFA charges.

Just because it's not full-auto doesn't mean states can't come up with their own bans, and both Virginia and D.C. have done so. VCDL has issued an opinion that the Virginial law is so poorly written that it should be considered invalid*, but that's going to require a test case, and it looks like that guy volunteered.

* Remember when Saint Kyle of Kenosha was being persecuted and undergoing tribulations and the judge decided that the state law prohibiting carrying of a rifle by a minor was so badly written that the charge had to be dropped? Same deal with this law in Virginia, the legislators were dumbfucks when they wrote it.

>>64400806
No, you fucking moron, he is being prosecuted under a state law that prohibits all FRTs, Rare Breed or any other. Same as in a dozen other states including Floriduh, Illannoys, Californication, and Jew York.

If he'd put in a Rare Breed he would be just as fucked. Or not fucked, see my above comment about "test case".

>>64412930
Yes, it's the same trigger group, so a SS will work with those parts. There is however a nuance. The bolt carrier is different so the lever has to be modified to work with the different bolt carrier.

I don't know if there is a way to print a lever for it or if the commercial solution >>64412934 is the only realistic way to do it.

File: 20251016_140620.jpg (2 MB, 3468x4079)

2 MB JPG

>>64387899
>was on r/fosscad but that's gone now and I cant find the post
I w
Just got back into 3d printing and saw that the subreddit got banned literally three days after I was into printing again. The subreddit splintered into a handful of new subreddits but I think the mods officially decides to take things off site

Fosscad.io
Forum.guncadindex.com

These sites are "federated" and you need an "instance" to post. Hosted on "lemmy". Whatever those things mean.

File: 23646.png (20 KB, 867x116)

20 KB PNG

fudd lore or true?

>>64414938
well yeah, pinning the trigger to the rear would be a machine gun

>>64400806
Wow it's illegal in florida? they gotta fix that asap

Anyone gonna make the next thread? I'm just gonna copy/paste the OP from this one and just add that AZ frt to the list