It's almost time for $0 tax stamps. You can finally, legally, have fun. Buy a $400 P1S from Bambu, some Pa6-cf filament from polymaker, and get to work. Some 3dp2a guys released the FTN 5.0 suppressors recently. There are suppressors for pistols, pcc's, and rifles. Let's talk about the last one.To start out you will need ONE of these muzzle devices:>Breek threaded muzzle+ Castle Shield <-Best one>KAK slimline micro flash can>1/2x28 to 3/4x16 thread adapterNow you can print an insert that will attach the suppressor body to the muzzle device. The breek insert is a clamshell design. Put the two halves onto the castle shield and screw on the suppressor assembly. The other two will need some epoxy.IF you want the suppressor to be permanent, epoxy the threads of the insert and suppressor body. It'll help with the longevity and make a better gas seal.The main body will NEED to be supported by a sleeve. You can print the sleeve, but the lifespan is shorter with a lot of restrictions. You can use a 56mm ID and 60mm OD aluminum OR carbon fiber tube with jb weld. You can also use fiberglass and resin wrapped around the tube, but this is less effective.Total cost>$60 Breek muzzle+castle shield>$12 aluminum tube>$15 JB Weld>$15 PA6-CF20That $400 3d printer can pay for itself in 4 silencers or 1 silencer and 1 40k model.
imma wait for the bullshit to settle down before I even botherplus I was hoping the SilencerCo S98 quick release suppressor would be out by now. I guess thats next on the list
>>64697826>breek flash hider and flash canFun fact: the flash hider's external threads are 13/16-13, a common thread pitch for other interesting projects.
>>64697826Why shouldn't I buy a Chinese fuel filter and electropencil the SN onto the side?
>>64697887Fuel filters suck shit as suppressors. I can see doing that as a meme and for no other reason.
>>64697826>$0 woooooo!!! I just have to fill out paperwork and wait for someone to give me(a mental child) the thumbs up!!!!!!>cant wait to order the funko- i mean suppressor collection!I mustve missed when people cucked out on this
>>64697838If you haven't noticed, there have been virtually no new suppressor models launching since the tax stamp announcement came. They were gonna price that shit well over $1000 but now they know there isn't a chance in hell it's going to sell at those prices. So they're probably waiting to see where the market goes, and I wouldn't be surprised if it's nixed altogether, since I very much doubt they actually have a cost-efficient manufacturing process.
>>64697826Don’t you actually still need to fill out paperwork? That part is more annoying than the actual tax
If you register any of your shit you are deadass a goy
>>64697931Yes, but the annoying parts of said paperwork don't need to be repeated on successive purchases
>>64697870I just want a 3/4-10 blast shield to screw onto my mac.
>>64697927Nice try4chan is definitely not heavily botted and the govt has ZERO supercomputer AI's running analytics here.On another note guys make sure you don't early print suppressors on a Bambu that's connected to the internet, you wait until you get the thumbs up for a registered adapter.
