>>64740976
same way you patch any other holes in drywall, retard

>>64740976
Fuck ya
mudda

ND's are a normal part of fun ownership

>>64740976
Toothpaste. Or just put up a cool poster

>>64740976
stay in school nigger, you are not cut out for this thug life

What about aluminum?

Bondo and expanding foam?

>>64740976
>>>/diy/
There's a few ways to do it
>Not my problem: tape over the hole and paint over the paint
>It just works: buy a drywall patch kit
>Too much free time: cut a square around the hole at a 45 degree bevel, cut a matching piece and plug it in, slap some fast setting mud over it, sand, paint and lick the fixed area for good luck

>>64743156
>45 degree bevel
Just put a paintstick through the hole, screw that into the good sheet as a bracer, then fit your plug and screw that on. Then mud your screwheads and seam.

>>64740976
How big is the hole? .22 hole can be patch with a goo from a tube. They have it at the hardware store. 12 ga. would will need to cut a around it to make is a clean hole. Buy a 2'x2' piece of drywall, cut a patch to replace hole in the wall. If a stud is in the hole, put in patch with a drywall screw. Use patching compound from the tube to fill the gaps. Sand and paint. If no stud in the hole, get a small piece of wood that is longer than the hole is wide. use it as backing with a couple of drywall screws to hold it in place. Place patch in hole and screw it to wood backing piece. Goo, sand, and paint.

>>64743170
That works well but seems unnecessary for a small patch

>>64740976
Dry wall patch, if you're in a real hurry and just need to hide the problem as opposed to fixing the problem you can stuff it with TP depending on caliber or cut out a slightly larger piece of printer paper, scotch tape it, and dim the lights

>>64743183
True. More a method for fists, feet, heads, doorknobs, etc.