OH-6 Cayuse EditionOld: >>64759721
TYFYS
Ash is a womanThat explains why she is a bad person and is terrible with money
Mandatory view for BIG BOSS.Grab your AR15, get comfy and watch.https://www.youtube.com/watch?v=Nd17ZGaoZ58
>>64763692You stole my thread faggot. Make sure it never happens again.
>>64763723Homework? For the weekend? Fuck my stupid uncle fucking life
First for thermal
Rate late friday post>>64762715>Get ARJust inject the image into a housing or use an EUD. A pas29B is probably the worst way to possible to get SA. Like goddamn have you ever used one? They are so noisy the last thing you want is more bullshit popping up.>double down, why not ha. We can at least agree it's pretty cool, and I do have friends that are into it and build MESH nodes/drones/etc.Nah tak at that scale is actually useless if not downright detrimental
>>64763934>Rate6/7.
>>64763934What's your opinion on mesh? I bought all my friends DM32-UV radios for Christmas so we'd all be on the same hardware and now a couple of them are getting into mesh nodes
All suppressors without cooling ducts are obsolete.
There appears to be a truce between the rifle length chads and the SBR chuds in the Middle East.
>>64763934
In the big Block II rail mountainAll the grips have KAC engravedAnd the KK cans use normal mountsAnd NüSCARs were never made
the b5 wiggles the lmt is tight
The b5 is looser than your mom's loose cunt, just buy a magpul CTR
Why do a lot of firearms related things use hex screws? Why yes i love having to drill out the 8 screws in my scope mount because theyre all made of chinesium pot metal and are easily stripped
>>64764138Buy better optics.
>>64764117i’m not poor
>>64764184Yeah you are
>>64764088>>64764117Just put a strip on tape on the buffer and its tight as a field mouse
Is the plx c 1-8 rdb good? it seems like the perfect compact lpvo, I want a compact lpvo for a lightweight build I have, minimal shit on it. everything else is either heavier,/bigger (eotech vudu, vortex 1-10) or shittier (nightforce nx8)
>>64763692Faggot ass 'stache honestly
>>64764117What receiver extension are you using it on?
>>64764138You're thinking phillips head or torx would be somehow less likely to strip? Get a better allan key torque driver and be careful not to over torque your screws.
>>64764284not him but hex fucking sucks dick, the only hex screws I found that weren't dog shit are the ones ADM uses for their scope mounts I think they are 5/64? or 9/64? but they are heavy as shit and heavy duty. Every other company that uses hex screws uses the same shitty YES screws from the same bulk maker, Torx will always be superior nigger. Ive used the same torx screws on my arisaka mount taking it on and off for years and they still work fine. Literally anything made in the past 5 years is all torx now or moving to torx. Even wood screws are torx. I can't imagine using anything else with modern manufacturing now.
>>64764323Are you mentally retarded? If you're stripping hex screws on gun parts, you're either using worn out bits, using metric bits on SAE screws or vise versa, or torquing them like an enraged gorilla.
where fox
>>64763934mmm, cheddar
>>64764284>allan
Bad timing I guess. Try againWhich rifle brands make you respect the owner more when you see their choice? For me it's Larue, Centurion and maybe LWRCI/DD but usually only with a quad. Which rifle brands make you respect the owner less when you see their choice? For me it's Geissele, Radian, Q, SIG or any of the other brands from that category. Especially anything sub-14.5" Which rifle brands make you feel nothing about the owner when you see their choice? For me it's KAC, PSA, LMT, and home-builds, including traditional pinned FSB clamshell types
>>64764488holidays only
>>64764527topkek
>>64764523I got memed into buying a g$ sooperdooty 11.5" and it doesn't spark joy. Learned my lesson and I'll never buy a complete AR-15 again. Only build.
>>64763720Wait fr?I remember seeing his face and thinking this is one feminine ass fat boy, how unfortunate
>>64764088TrueLMT plastics are very good, better than kac
>>64764523I like buying larue because it fuels Marks ig ramblings, they're just so fucking funnylike the time he posted about bashing in a badgers skull with a tire iron and posted the pictures
Best magpul stock>but muh storage Not my problem
>>64764752*sorry wrong pic
As long as it’s not a K2 grip I don’t care what you use.
>>64764820sorry, wrong pic again.
>>64764872nope. don't try again
>>64764904*gagging noises*
/arg/ approved light setup is genuinely one of the most expensive suggestions for what it isLight autism pisses me off
>>64764904Wrong again manlet
>>64764951But what if you have to Super Safety mag dump at a home intruder in your completely light sealed windowless home?Do you really want to risk your Streamlight flickering for a microsecond??
Planning to make a 2nd SBR. Should I go for the boring DD block 2 upper? Current SBR is 10.3"
ive a question for someone thats handled both ak and ar or atl wont just shill the ar as betteris the weight balance of the ar from its buffer tube good or bad? you lose foldable stock but the weight is pushed backward and this allows for a heavy barrel and short stroke piston up front without messing up balance. with a telescoped bolt like the scar, ak, bren, hk433 this might be too heavy.but also having the reciprocating mass "out there" might make it easier to control (esp in auto) but slower to pointi think in general the light and rearward moving mass of the ar makes it better for single shots while a compensated 5.45 ak is really known for its two shot burst usability. more mass and more forward.
>>64763720He's playing runscape (with gender confused individuals)>>64764523I tend to judge on how salty the platform isIt's pretty obvious if somebody's run the fuck out of something. Agree for the most part otherwise>>64764951Both of my malkoff (3v and 6v) are bright enough to blind crackheads which should be your minimum standard. Might try phlv2 eventually if I have another rifle that needs a light upgrade>>64765273Both are very soft shooting, AK slightly heavier and more difficult to deal with optics. Any AK+optics will feel more awkward than a carbine or mid length rail ARI go a different way with monolithic meme machine that's more front heavy but still not as tedious as an AK with dot+light. AR et al much easier to squeeze out better accuracyThe death of 7.62 and 5.45 really shit up viability of the AK for a 'buy only 1 rifle' mindset
>>64765319basedi like xcr. underrated.yea aks are pretty shit with optics. buffer tube make balance w optic better. but i wonder if bren, scar, etc suffers too. unlike your rifle the ak is uniquely front heavy.
>>64764284Love torx, best fastener as long as you use the right size and they're not rusty
>>64765198I wouldn't do all the SBR shit for a 14.5, even if they're free now.
>>64765355I'd say the only thing that really messes with the bren2 is the stock being so light and that can screw with the balance once a can is added. Otherwise the g36 style bolt catch inside the trigger guard is kind of a turn-off for me
I'm getting a Lucas Botkin hand guard when they come out. Who else is with me?
>>64764951Lot of options to personalize setups, relatively low barrier to entry as far as cost, ton of compatibility issues, and different opinions on beam pattern. People get pretty invested in the autism especially when they get burned by a franken light setup that on paper looks great but sucks in real life.
>>64764523What happens when I have a Centurion and Geissele? Also a few others but theyre not listed.
>>64764951https://www.specprecision.com/tactical-flashlights/m340dft-pro-mini-scout-light-pro.htmlGet that just to get the 18350 PRO Pivot body. PLH V2 Multi Mode head is like $125-$175 used, or new for like $190-$210 or something. Unity gas cap USB C and modbutton USB C is like $100-$150 used, $175-$200 new. >>64765198Post pic of current AR and what guns you currently have. >>64765273Damn dude it says on your chart that you're fucked up. Ah, you talk like a fag, and your shit's all retarded. Anyway. I love AKs. I've done a lot of AK builds and shot with AKs and trained with AKs. ARs simply are superior though. Don't get me wrong though you can be absolutely just as deadly with an AK though. Just gotta run it and train with it etc. >>64765533I don't mind this build.
>>64765504I heard he is really going through the GRINDR trying to get to the BOTTOM of what makes a good handguardApparently he has his TOP guys working on it
>>64765533nice rifle>>64765504maybe
>>64764988what about this stock though
>>64765759>titanium suppressor>airsoft laser>400 tape switches >recommending airsoft light body >ADM QD leverWhat an incredible pile of dog shit you cobbled together. And you think that you're justified in handing advice out to anons? Serious question, why get the knockoff laser when you can spend the same amount or less on a Chinese laser that isn't playing dress up? An SMS trinity is $350, and won't die under recoil. Is it just to play dress up?
>>64765888That's an inconel B&T suppressor and the SMS trinity is having wide spread issues holding zero.
>>64765893Inconel blast baffle, rest is titanium and no its not
Best place to buy a charging handle and a BCG for 300 AAC? My AR-15 pistol needs them
>>64765912You're wrong retard. You're thinking of the B&T XH series which that is not.
>>64765912Dumbasshttps://battlehawkarmory.com/product/bt-print-x-rotex-mini-k-5.56-gray-suppressor-hub-compatible-no-mount-included
>>64765934>>64765943yeah well you're gay
>>64765888>Titanium suppressorWrong>Airsoft laserWe've already been over this>Serious question>won't die under recoilI've got close to 5000rnd underneath the chink NGAL. No issues at all except that the laser doesn't hold zero better than 3-5 MOA, but given that the laser is more for signalling or at worst NVG gas mask work indoors/CQB where a headbox is 85 MOA and a torso A zone is like 175 MOA, it doesn't need to hold zero. The Chink ngal meets the functional requirements, while looking correct on the clone gun. >recommending airsoft light bodyYes, it is literally a threaded aluminum tube. >>64765912You're fucking wrong retard. It is a single piece inconel. >>64765913I like the old BCM charging handles, the DD Grip n Rip. Radians aren't terrible. >>64765959Pinnacle of intellect post.
>>64765959I would kiss your mouth if you said that shit to my face
>>64765959lil nigga tried to correct someone while being wrong lmaooo
>>64765969Why doesn't shartfire sell the pro bodies seperately anymore? I remember seeing them for sale at primary arms and a few other places it's kind of gay
>>64765994Good question. They used to. Probably stopped because they were getting their lunch eaten by people building functionally superior setups by combining their body with Modlite heads. Typical shit behavior to create profit not by providing the best product at the lowest price, but rather by controlling markets and supply of the truly valuable components of their product, to force you to buy the shit components as well as part of a package. SiCo is still trying to do this faggotry with their Charlie mount bullshit. At least the Irregular Hesychia has a novel truly increased function integrated mount setup. The ASR isn't even good. That being said, Irregular still released their Hesychia suppressor with guess what... a hub mount, because only those already with capital and some degree of market capture can afford to engage in the nonsense that is "ecosystem packaging" to force the consumer to pay for crap value to get a small bit of good value, all at the profit (which isn't the problem inherently) of the company. The problem isn't profit, it is non-ethical lack of respect for sovereignty in the abstract moral sense.
>>64765969>it doesn't need to hold zerothe absolute fucking cope on this guy. If that were the case, why not just use a standalone illuminator to save weight/money and shoot at the hotspot indoors? How much experience do you have with NVG gas mask CQB? You ever get any formal training on it and the use of IR lasers?
>>64766032see>>64763723basically a cheap kiji
>>64765969As a guy using an HFXC (so with zero room to talk shit) I gotta disagree with you bro.
>>64766090>Absolute cope3-5 MOA zero retention is more than adequate for 85-160 MOA POA precision requirements. That isn't cope, that is objective math. >standalone IR illuminatorAt the time of the build, and I think this only just changed in the past week with the new Holosun release, there was no option for a continuously adjustable focus IR illuminator. There was the Kiji, but that setup starts at what, $650 and goes to $850? Also the laser is useful for signalling etc, and even the visible laser has uses also. Plus once again, there is nothing wrong with trying to prioritize looking cool/clone as well. The Chink NGAL checks all the boxes. Cheap, light, continuosly adjustable IR illum with different two different power levels, IR aiming laser with two different power levels that retains zero well enough for intended application (CQB, signalling), visible laser that also retains zero well enough for intended application (CQB, signalling, deconflict, less lethal etc), and yes, I like that it looks cool and fits the clone aspect of the build. >how much experience do you have with NVG gas mask CQBI have beginner experience with both gas mask stuff, and NVG stuff, CQB. Haven't combined em yet, but it isn't that difficult to conceive of. >>64766103>cheap kijiEh, better because continuously adjustable focus.
>>64765877Thanks, same to you. Is that a real LSO grip? Those things are cool.
>>64766126>I gotta disagree with youThat isn't an argument lol. State your argument? >>64766090The chink ngal has held up to the use requirements I have for it. Over 5000rnds on it, 3500 if not more being FRT fire, plenty of heat. Cold and hot environments, a solid course, a field exercise, many a range day. They also have been thoroughly reviewed and durability tested by others, and basically everyone agrees, the main issue is zero retention and water proofing, which a bit if silicone in the power stop screw holes fixes. Not sure why you're so mad about this topic? What do you use for IR lasers and illuminators?
LAMs are outdated in modern warfare.
>>64766152I'm going to abandon them all together, but they're pretty far down the list at this point for aiming solutions at night. Similarly actually IR illumination has been pushed down the list thanks to the proliferation of thermals. Passive enhanced detection is definitely superior to active emission enhanced detection. Like okay maybe you're in B tuns, and you don't want to be looking through a thermal for super low light detection due to FOV restrictions... I would argue that even shit ass tubes even in extreme low light situations like a fuggin tunnel, offer enough detection to function well, mainly thanks to the close ranges that such environments present.
>>64766129>>64766148>replying twice with an explanation to the same post within 6 minutesbrain damage is a hell of a thing. Guess your critical reasoning isn't the only thing that's taken a hit.I use a raid xe because it's the only laser that isn't cope and heavy
>>64766172>shitty tubes, let alone any tubes, being acceptable in sub-t environments without IR illumLMAO.
>>64766177Hey man don't get me wrong, if I had $4000 to blow on an IR illum/aiming device that is 3rd down the list of priorities for detection and aiming... I guess I might buy a real NGAL. Might though. If I did have that kind of money, I still don't think I would spend it on an IR illum/LAM. Lot of other stuff I would prioritize. A lot. >>64766184I've been in some relatively dark environments with Gen 2+ tubes, and sub 50-75m, you can make out a human form just fine, and whatever benefit true gen 3 tubes have, is marginal compared to the benefit of active IR illlum, so the real issue you should be pointing out isn't shitty tubes vs good tubes, it is IR illum vs none. I'm confident that that situations where somehow gen 3 tubes allow you to get away NOT using IR illum but gen 2+ tubes would have required IR illum... Are exceptionally rare, if existing at all.
>>64766172Cheap COTI is here nowCheap fusion is here now>>64766195Why the fuck would you buy anything less than omnis? They have been cheap for years
>>64766207>Cheap COTI is here now>Cheap fusion is here nowPrecisely why I decided to only spend ~$325 on a chink airshift clone IR device >Why the fuck would you buy anything less than omnisLol you yourself just said above "Cheap COTI is here now". Prioritizing super nice tubes doesn't make sense, when you're not going to be relying on the tubes for detection. Gen 2+ tubes do just fine for making sure you don't walk off a cliff. Gen 2+ tubes do just fine for identifying a person vs a trash can sub 100m as compared to gen 3 tubes. Hey man look I've got 2200 FOM white phos, so don't get me wrong, but I would argue most are way better served spending $3500-$4500 for some Gen 2+ binos and then spending $1750-$3000 on a COTI or COTI+handheld scanner, than they are blowing the equivalent amount of super high spec Gen 3 tubes, or just even paying the gen 3 premium over gen 2+.
>>64766184This
>>64765792trip on stinky
>>64766224Omnis aren't super nice tubes. Before the L3 apocalypse they could be acquired for 800 all day long. There is no reason to use gen2 dogshit unless you're some sort of ITAR situation limiting their availabilityGen2 is for coping eurotards and get mogged completely by omni VII/VIII
>>64766257NTA but lucass butkin is a gay man with gayface
>>64766224>I would argue most are way better served spending $3500-$4500 for some Gen 2+ binos and then spending $1750-$3000 on a COTI/arg/ has been obsessed with buying junk thermals for a few years now
>>64766263so is shoenice who i was replying to
>>64766263
>>64766184>>64766227And this is why the primary purpose the chink ngal fills is IR illum... and it has done so reliably, not just for me but for many others, with totally acceptable durability and longevity. I'm waiting on Surefire (or anyone for that fucking matter) to release an updated 340V head that has threads for 18350 bodies and maybe a bit more visible light candela and lumens. I like IR illum. I value it. I think in the past 2-5 years long range adjustable focus IR illum has been supplanted by thermals though. But as I said earlier (reading comprehension), close range IR illum (B tunnels) is a pretty niche use-case, and at these close ranges IME you can detect pretty well even without additional IR illum just by virtue of the total NIR emission captured by the optics. Yeah maybe there is an intermediate range 17.5m-42.5m where the FOV restrictions of most thermals would be too problematic, but that passive NVG detection would perform too poorly. To that I respond, where the fuck has your situational awareness been that you weren't effectively thermal scanning and detecting prior to closing that distance with opposition, or what silly end of days dark walmart are you in? I live in literally the 6th least populated state per sq mile in the union. I've been out in the dark before. Gen2+ tubes binos and a multi use thermal with a chink IR device is a better setup than gucci gen 3 binos and a $2000-$4000 IR device. >>64766260Okay yes sure if you're going to jump through the hoops of having a setup built and you're sourcing the tubes and housing and glass separately then sending it off to a builder yeah sure, you can probably get Gen 3 Omni 5-7 or w.e for $500-$1000 more total in the build than the exact same housing and glass with Gen 2+But most aren't doing that, the differential is closer to $2000-$3000 because we're comparing turn key setups buy it now add to cart to similar. >Gen 2+ is for coping eurotards and get completely moggedQualify this
>>64766224>>64766195>spending money on good NODs and thermals which will actually help in the event of a conflict is not a priority>buying/building AKs and shitty LR-300 clones isYou should really work on your prioritization methodology.
>>64766279You can buy a tube, housing and glass and assemble it in 15 minutes with $30 in tools. It's easier than assembling a lower. Everything screws together.Omnis are the king of light amplified/$
>>64766267Exactly, wake me when I can buy the FWS-I commercially.
>>64766224>spending $3500-$4500 for some Gen 2+ binosWhere the fuck do I get that? I see most pvs14s going for $3500 now.
>>64766148>State your argument?Basically boils down to "if your zero is drifting that much there's no reason it won't drift further under realistic circumstances and you're trusting an unknown POI" which I'm heavily against because bullets going where you intended is rather important even on the range. My 40mm will absolutely yank the POI on my chinklaser and that's a problem IMOBut I just use it for a convenient focusable IR illuminator and white light package on a budget. I'll pony up for something good when I stop being a fag (unlikely)
>>64766373You mess around with printing ammo and stuff for the 40mm? Always wonder about if it's worth it to get and mess around with.
>>64766288Lol I mean fair. Waiting on a few serious things while working on the LR300blk (which has serious too akshully). Need another Nx8 2.5-20Waiting on all thermal prices to come down a bitWaiting on a chrono>>64766299>assembling your own NVGAh yes, this is excellent general advice!>>64766339Those Chink RIX things are on sale new from various vendors all the time for $3500-$4500. I've seen em used for as low as $3000. Albeit the issue is that they don't come with real PVS14 glass. Some though do, those are the ones closer to $4500>most pvs14s going for $3500Exactly why my point is that gen 3 isn't worth it. >>64766373There is a fundamental difference between drift (bias error) vs imprecision. I've not subjected my chinklaser to 40mm recoil (that real HEDP? fugg), but from what I have subjected it to (elaborated on earlier in thread), I've not seen significant "drift" but rather just what appears to be laser POI imprecision. The lack of zero retention that I have measured three times now (various round counts etc) is basically within a factor of 2-3 of the actual zeroing imprecision on the adjustments themselves, almost as if it is slop in the adjustments and the mechanism that leads to the apparent 3-5 MOA zero "drift". Imprecision improperly characterized over time can look like drift. >I use it for convenient focusable IR illuminatorThis is exactly my primary use for the chink NGAL, and it works well. >pony up for something goodI've been arguing all morning that this isn't necessary. Spend the money on literally 10 other things. Handheld thermal scannerShort range cotilong range cotiSASSELR rifleAnti mat rifleDronesMore dronesCoursesFood prepsSubgunPCCFRT shitBelt fed etc etcSO many more things to prioritize than ZOMG my IR laser holds zero! It is fucking 2026.
>>64766434>ChinkOh fuck that I should have known better than to ask you.
>>64766434>that real HEDPI fucking wish lol, just some hollow plastic fakes I used for pictures. Guy that converted my ML37 to 40mm wanted product photos. And a half pound chalk round at 350fps is a hell of a kick, good way to test electronics lolWhat you're saying is reasonable, especially if the idea is "the laser really isn't the point of this device" but I just don't agree with the base argument that an aiming device not holding zero isn't concerning. I guess in my mind I'm equating it to a red dot having the same issue. Which I recognize isn't what you're saying, but I have a hard time not associating them. I do use the laser on my MP5 though, a lot, and it holds zero on such a low recoil platform which is nice. >>64766403Yeah I actually designed a cheap, quality, printed foam less lethal round for the 40mm to shoot on a budget/let others try at the range. I'm working on OC/CS rounds and I have an impact detonating flash round as well that's a couple bucks a pop.
You're all gay
>>64766521Excuse me sir, I am a faggot, I've sucked a lot of dicks to earn that title and I deserve to be called as such.
>>64766521I really doubt it desu
>>64766475Very cool stuff, definitely seems like a fun thing to have and mess around with. I've busted out my printer recently for some Army related stuff and it's got me thinking about the other fun things I can do with it before I shove it in a closet for another 5 years.
>>64766619I certainly don't regret either 40mm I gotHave a 150ish yard flash bang shot (up in the trees, was still figuring out zero)
>>64766475>I'm working on OC/CS rounds and I have an impact detonating flash round as well that's a couple bucks a popAre you on your way to Minnesota by any chance?
>>64766631No I just have an industrial quantity of fucking teargas I need to find a use for because I frequently let the intrusive thoughts win
>>64766670Between the 203 and the ML37, what do you prefer? always wonder if the swing gate loading matters for Civs since there really aren't too many long boy rounds to take advantage of.
>>64766716The ML37/40 is objectively superior in just about every way. It's QD, it's side opening, double action, fits rifles better, cheaper ladder sight, nicer stand alone chassis, and it's cheaper on top of all that. If you print/build your own ammo the swing-out loading does present an advantage, by the way.
>>64766750That said, the M203 is just fucking cool.
>>64766856image looked right side up on my iphone, not sure why it rotated
Currently building an 11.5 carbine upper as a spare. What is the general consensus on Centurion rails as well as their stripped uppers? Love their barrels and their CM4 lowers. Was gonna grab a used Bendy Bill MK4 but idk.
>>647668594ch strips exit data
>>64764222
>>64764752this stock is pretty neat minus the magpul label
So ARO mrs has a shit notch filter. Skip
>>64766959Idk what that even means
>>64766859Crop the picture even a little bit vertically newfag
>>64766969some holosun garbage
>>64766269oh
>>64765969What is this thing? What does it do?
>>64766207What is this cheap coti? You don't mean jerry whatever do you? I've been eyeing the RENV-C coti but 4k is months away for something like that right now.
>>64767057Fidget spinner
>>64767070
>>64767057gas-o-meter for the Go To War upper
>>64767067I just looked at that image again, is that 3D printed??
>>64766475I've only shot a handful of chalks but it truly is fun. I actually should get into a launcher. Waiting for some good breacher rounds for them. Definitely excellent way to test max g for electronics. >base argument than an aiming device not holding zero isn't concerningI was about to respond but then I continued reading lol>isn't what you're sayingI appreciate that. The point I'm making is a bit nuanced and convoluted. For my POU, lasers are for signalling/deconfliction/less lethal, and if they are being used for aiming, my POA/POI precision requirement is like fuggin 80-160 MOA because I'm using it for indoor CQB gas mask NVG stuff. The aiming part of the LAM is SO far down my list of aiming methods and application cases, and the requirement itself is SO lax, that it becomes trivially logical to spend $300 on a chink clone laser that matches the aesthetic of the gun over spending $2500-$4500 on a "real" laser. >no associating themI get it. LAMs for the longest time were about combining with focused IR illum to make NVG shots at like legit distances, so much so that we cared about parallel vs converging zero so that we would have consistent hodls WITH the laser lol. But then binos got cheaper, and more red dots have good NIR transmission, and more people got nods and now most everyone shoots passive (or ought to be honestly). >ML37I know it is functionally superior AND cheaper to a 203 but I want a 203 just for the aesthetic on my CQBR Block 2.5>MP5Nice BT rail. I want a drop in FRT SS trigger pack for my MP5k so bad. >>64766880Centurion is solid. But I would just get an MCMR lol.>>64766959Bad NIR transmission?
>>64767057Innovative Arms W.A.R. upper. Literally back in 2016 Giddy (long gone brownoid poster) was pioneering their use. They're originally and still primarily marketed as a 2 position gas switch for 5.56 suppressed vs unsuppressed case, originally developed back when high back pressure cans were the absolute norm. I'm trying to use the system rather instead of being a switch for 5.56 suppressed vs unsuppressed to manage the increased backpressure of the can, as a switch for 300blk subsonics vs supersonics, both with a can, to quickly and on the fly, truly as quickly as performing a reload, adjust the gas so that subsonics can be legit reliable, but supers can be not ridiculously punchy and overgassed. So far it isn't working lol. >>64767067DNT HS635
>>64767174>DNT HS635Not a thermal scope, the device that clips onto the night vision. Pic related, it overlays a thermal outline that you can adjust the settings of into your nods.
>>64767186>DNT HS635This is why nomenclature is important. COTI is the device that goes onto NODs, the thermals that augment day sights on a rifle are just called clip-ons or thermal clip-ons if you need to distinguish between I2 and thermal devices. Calling everything a COTI just leads to confusion.
>>64767067Bcoti$450 for the build kit
>>64767295That's interesting and I think I will try this, though I'm a brainlet at circuits/electronics. Thank you for telling me about that.
>>64767141Yeah we're definitely coming at it from different directions and I acknowledge that for sure. I think for my uses it's still important but I'm also not trying to stay current with the firce on force meta so active emission isn't as big a concern to me and paper/steel. Different use cases (aka, the root of 90% of shitfests on /k/) Yeah I agree on the 203 and that's why I have both lol. Also, the Shorty-40 looks tits on an MP5, pic related SuperSafe MP5s are the funnest shit ever. Unfortunately my SD is bitchy about 115gr because it doesn't have the bolt velocity to ram my finger off the thing
>>64767398And speaking of chink lasers, behold! my latest retardation
>>64767405Those coupled mags are insane.
>>64767405Tell me more.
>>64767424Lelkek P50 with a StuffAndThings lower and a super safety The mag release setup was designed by a fucking retard, I'd wait for a Mk2>>64767412100 rounds on the gun, neat trunk blaster I guess>>64767141>Waiting for some good breacher rounds for themOh! I forgot to ask, what are you looking for exactly? Might be a good project idea for me
>>64767436>100 rounds on the gun, neat trunk blaster I guessI love it.
>>64767436I love that everyone is getting super safetys. My state still has it banned but I really want this to stay and hopefully help get the NFA banned. SMGs are fully back.
>>64767459Pandora's box is wide open with FRTs and super safeties. There still will be efforts to ban them in the future but they're beyond "common use" when that argument has to be used during the 5 year long case to unban them.
>>64767459The past two times at the range I heard them from other bays.
>>64764951on topic, best minimalist light for a 7.5 abomination build? mini scout with arisaka 300?
>>64767509g2x in a ring mount
>>64766885>>64766971I guess cropping the pic vertically makes the phone create a new version and not just flip in in the exifdata (which gets scubbed by some sites), cool
are you supposed to slide your mount forward into the picatinny and tighten or slide it rearward into the picatinny and tighten
>>64767849load it rearward for recoil
>>64766263He's married to what seems to be a girlboss leftist lady. I'm surprised he remained in the firearm industry after she drove a wedge between him and the company he founded. He made the mistake of onboarding his wife to his company and the obvious happened. That being said, I respect Lucas a hell of a lot more than most in the firearms industry who keep silent about Israel and our ZOGged ass political system and foreign policy.
