Thread Theme(s): 1. Small parts and why you should have them.2. Why does my buffer retainer pin keep breaking?3. How to protect yourself from copper slag on the internet.Previous:>>64868353
Yeah
>>64875778I remember my first time trying to remove my buffer tube and forgetting about the buffer retainer.
>>64875792happened to us all
>>64875792That happend to me with he grip
Keep a magnet and some small sturdy wire around.
>this time I will remember the safety detent spring
>>64875778Beginner's Guide/Pasty:rentry.org/sa6c4m
>>64875839I don't want a safety anyway.
>>64875803never happened to me>>64875839i always remember
>>64875869>never happened to methats because you're a noshoots
>>64875874thats a lie and everyone knows it
So my parents are buying a business in texas. They are going to focus on it and retire there, most likely. They want me to help if possible. I have always lived in a ban state and might be looking at finally being able to own a suppressor, SBR, and various freedom things. What should my first uncucked build be?
>>64875905>martha & Paul’s California bisexual cakesBcm upper. H&r lower, no fence.
>>64875905Geissele Super Duty upper, Noveske gen 1 lower
>>64875905I forgot the suppressor part… I have it on good authority that the used B&T PrintX Mini 556K is going to be booming soon.
>>64875905Sig since you’re basically moving to India
>>64875937>>64875935>>64875925>>64875913Great advice, thanks!
>>64875905pack-a-punched ARP wit all da drip mane
Eotech or Vortex AMG UH-1?
>>64875969Ask yourself seriously. Is this even a question?
>>64875969Aimpoint T2
>>64875969irons
>>64875905Fuck off, they're full
>>64875840When's the last time this was updated>avoid Geissele>everyone (including me) now shills Geissele
>>64876120You never ask an anon when his infographics were last updated. We both know the truth.
>>64876120It was made by a "former" tranny, don't look at it at all
Another successful range trip. Went through 9 magazines of 29 rounds each. No problems with my buffer retaining pin shearing or my pivot pin seizing at all. Feeling great about my decision to deviate from the original design.
>>64875885
>>64876153I should have gone with 10.3
>>64876210Csnt handle a 10.5 sissyboy?
>>64876210What's the magnification on that? I am tempted to put my TA31 on my 10.3
>>64876254It's a TA31, so 4x>>64876236N-no I'm just CQBmaxxing
>>64875778Byeah
>>64875778Can I get a drip check on this build?
>>64876290he should paint it and wear camo he is easily spotted in the deserts of Nevada
>>64876210Mk18s are cool
>>64876290Average a2 grip enjoyer build (black)
>>64876296It is kind of weird how they don't wear clothes.
Did ash drop trip or something I haven't seen him in weeks.
>>64876307>how dis make you feel human boy?
That was the best cinematic short since Dead Island
>>64876311Xe's getting bottom surgery
>>64876309Current lore is that they are bots
>>64876309they do wear them its a skin tight latex suit that helps them in other planets atmospheres and space suits.>>64876339some are, not all
Test
>>64876327Is this from the 21' movie?
>>64876332Do you have proof of this?
>>64876448>ResiDEInt EvilNo, it's from the latest RE9: Requiem promohttps://www.youtube.com/watch?v=M6gXJoN8RNkIt has AR-15's and is superior to all the licensed films combined
>>64876494Wake me up when they do one on The 4th Survivor
>>64876467I saw it in a dream
Its happening again
>>64876210What barrel are you running? I went with the 10.3 because someone here told me to get a DD barrel and that's what they had.
>>6487655311.5 Criterion Core. It's fine, I just want that flush hand guard look. I'm not gonna replace it just for that, though.
>>64876505>whenprobably never since RE canon is permafucked
Games with urgi gun mods Googledotcom site: bungholio
>>64876580Nice, I have a Criterion in my 20" .308, it's good. I am trying to figure out a barrel/handguard for my supdef upper/lower still, was thinking about a geissele 11.5" w/ a 10.5" mk16 and building like a franken-URGI, but not sure yet.
Should I buy a ps90 to compliment my ar15?
>>64876840No you should buy a mk23 to compliment your AR15. Also post your AR15.
>>64876884Oops. I already did.
>>64876895Now you need to buy a Five SeveN to compliment the P90. I've been thinking about buying a P90 for my own Five SeveN
>>64876895lollmao
>>64876902I actually have little interest in the Five Seven beyond splinter cell. It certainly has the cool factor and capacity, but it’s ballistically meh to me from a pistol. I know, I know, Fort hood, etc, etc. If I can get a gen II and not a mrd, that’d be great. I think they did away with the overmold slide on the mrd.
Thoughts on my build?
>>64875803>said nobody
>>64876949could use a few more gizmos, maybe a whizbang or two
>>64876949This looks like a Lego.>>64876955This looks like the entire Zahal catalogue.
>>64876949Are you left handed or do you just have your sling on backwards?I like it
>>64877009Left handed people are going to hell.
>>64875905texas sucks for shooting, there's nowhere to shoot except private property and shooting ranges, they didn't even allow you to open carry guns until recently lol
>>64876309There's a cool mine up in that mountain there, used to go camping and exploring there a lot
>>64877150
>>64877150sp5k, UMP, or DOE ar9 for mine exploration subcompact?
>>64877157I'd probably do an sp5k because it's tried and true and just werks, and I like 9mm a lot
>>64877167that's what I was thinking but some people (AlaskaAnon) said B&T better which I think he is a wrong
>>64877169You clearly want one of the HKs you even listed them first just get the HK and be happy.
>>64877171I love the sp5k the most yes.
>>64875803FREE ARMALITE AR-15 ASSAULT RIFLE 15 BUILD TIP:If you drop a small part, drop another one and watch where it goes to find the other.Especially if it's expensive and you only have one left.
I HAVE NO AR15 AND I MUST SHOOT
hypothetically if i wanted to ARP max for nigga drip with da supa safety what barrel length should i get, handguard, etc other accessories? i need to waste my tax refund before i end it all
>>64877150This is the Lincoln Mine in Rachel Nevada right? I am once again motivated to train my geoguessing abilities
>>64877505>when u got hoops at 6 and family annihilation at 6:30
>>648775057” with no stock and a muzzle brake
>>64877167Huh. I just realized Dr Pepper doesn't look like that any more.
>>64877505Drip out at the ncstar booth also full of anodized strike industries parts every gun show has
Reminder to actually confirm your zero.
>>64877753The pattern is more or less the same in each group which is fascinating desu
>>64877769Same gun on the same day with the same ammo? What else did you expect?
>>64877774More variation due to the weakest element which is you unless you're telling me that's as tight as you can group with that barrel/ammo.
>>64875814Flashlight parallel to the ground for the gunsmith crawl
>>64875814>he doesn't keep job smart stainless steel magnet trays nailed to the ceiling above your work station ngmi
>>64877786I'm not the shooter. The "weakest element" is almost certainly the range slop fiocci ammo. Watch a couple preston moore vids, cheap ammo is not exactly consistent. I'm just saying it's not unusual for the POI to shift and overall pattern stay the same. Your POI can shift a lot depending on barrel profile and firing schedule
>>64877800actually a good idea, no way this is a BB post
WTB ISO old discontinued Guntec slick side slab upper receiver AR15 one. Also has anyone ever messed with one of those blowback 9mm AR9 uppers? Does a normal 5.56 BCG slide in? Do they have the cam path bits machined? Could you just drill a hole for the gas tube and enlarge the port and make use of an AR9 upper for an AR15 build?
>>64877814>slop fiocci ammo.I do not need to know that cheap ammo has a greater standard deviation than expensive ammo. Which is why I made this comment>>64877769which you then seemed to misunderstand. >>64877819>implying I'm not full of good ideasokay wow >>64877831Hey gimp your master is here and you didn't even acknowledge him
>>64877841>I do not need to knowapparently you do otherwise your second statement is just a really dumb thing to remark on. Next you're gonna tell me it's fascinating how water is wet
>>64877814Here are the muzzle velocities for each group50 : 2466, SD 53100 : 2460, SD 61150 : 2478, SD 36200 : 2486, SD 43
>>64877831You should buy one to find out>>64877841Your average post is about the same tier as a wugpost
Compared to picatinny, how well does mlok perform with high round counts? Considering its thinner im sure it'll be hotter quicker but also disperse quicker. Went shooting my MK18 and spent 500 round in about an hour and it was hot as fuck. I want to cut some weight from the gun so was thinking about swapping to mlok instead.
>>64877852>>64877849You misinterpreted my initial statement and I don't care enough to try dumbing it down further or exploring why you're defensive.
>>64877167>>64877169I would not get an sp5k. Doesn’t like cheap 115’s and is temperamental at best. It also doesn’t do what a pistol does any better. Get full size sp5 or something else.
>>64877859>wugpostyou don't know what a wugpost is then and I end all my ted talks with a wugpost signature
>>64877865You're replying to 2 different people. Im not arguing with you.
Has anyone ever experienced this sort of copper slag buildup in a suppressor? Any ideas on the mechanism by which it is adhering to the can interior surface and building up? Any ideas on efficient removal? Around 7000 rounds through this can, majority 10.3" shooting M193 STV Scorpio, bit of FRT SS but nothing abusive. >>64877859Eh. If I'm going to pursue this project I would probably just get this one, and mill off the shell deflector and possibly mill off the forward assist provision and either weld it up and mill it flat, or like make a flat aluminum or steel panel and cover and seal up the foward assist with that. https://guntecusa.com/product/ar-15-stripped-billet-upper-receiver-anodized-black-discontinued/>>64877861Do you wear gloves? If heat mitigation for the support hand is the goal the solution is gloves and or rail panels/covers that genuinely give you standoff from the aluminum. Obviously like a quad rail with KAC panels works pretty well, but you could achieve similar with an Mlok rail.
>>64877875>u don't understandYou both have TBI and it shows
>>64877886>tripfag posted this yesterday and didn't get a a single logical responsek truly has fallen hasn't it? Have you actually asked the manufacturer about it? I don't really see where it could possibly cause any issues since it's not clogging up any ports or impeding the bullet path. Looks like free blast baffle reinforcement to me there friend.
>>64877886I swear I’ve seen this post before! I better check last thread. The mechanism was the rifling technically engraving the copper jacket and then that particulate being picked up be gas. I would do what I told you last time. Soak and pick. Also I’d increase your cleaning schedule and make sure to write it down this time. >guntecIdk if interest but I do have an old Anderson sport upper. Youd likely have to mill of deflector but that’s about it.
>>64877861Mlok gets hotter faster and its dissipation does not match most ROF.Quad and gloves>>64877904My current theory is that his YHM mount has moved the muzzle too far forward in respect to the blast baffle so its not able to correctly self clean and as such the lowest pressure parts of the can are getting abnormal buildup.
>>64877898I wish I had that excuse I'm just an idiot savant
>>64877904>clogging up>possibly cause any issuesYeah so this is the fun part of this whole observation. This is a pretty new technically new gen 3D printed Inconel can with the typical porous finish that they're currently known for. I've been skeptical of PIP (porpoisely induced porosity) cans for a hot minute now, and we already have seen and heard of issues a while back with OSS cans clogging up with use. Complex baffle geometry that by its very design is meant to trap hot particulate gas seems ripe to do exactly that. Unlike carbon buildup, this slag is like melted on, and adds significantly more weight than carbon does. Not sure which is harder to remove as I haven't removed this copper yet, but as it stands carbon buildup isn't the easiest to remove (waiting for someone with a fucking kitchen scale that actually shoots to give us hard data of these cleaning soak solvents actually removing any significant amount of carbon). In my experience the only effective way to remove carbon buildup from cans is with dremel and cordless drill mounted wire brushes and as such you really can only get the blast chamber (not bad) or the last chamber before the end cap if it is an old gen removeable end cap can. The issue is that these new gen 3D printed high suppression low back pressure cans might have significantly reduced lifetimes than manufacturers know or are advertising (ignorance vs malice), and that citizens buying what they think are legit tools with corresponding longevity are not that. You're right this particular can doesn't have any vents or gas paths at the seam that the copper is collecting... but if it did, they would be clogged as fuck. Some ridiculous acid soak and hours of picking/scraping is not "normal" maintenance (depends on how much you make per hour I guess, $17/hr?), and if this is the direction we're going in, cans should be priced accordingly given that you might be replacing them in just a few months (assuming you shoot).
>>64877934>(waiting for someone with a fucking kitchen scale that actually shoots to give us hard data of these cleaning soak solvents actually removing any significant amount of carbon)24hr soak in breakthrough cleaner10min in ultrasonic after that15 rounds of m855 2 grams removed (mostly the engine paint on outside)Quite literally $60 down the drain, thank you breakthrough.More seriously they probably work significantly better on 22lr and handgun cans.
>>64877944Sounds like we had… a breakthrough.
>>64877949Egg status?
>>64877954Hatched & scrambled.
>>64877886>>64877915Darn. Guess I'll buy some KAC panels and actually use my gloves for once
>>64877956oh yeah. Now we're cooking
>>64877909I like the idea of copper vapor/gas. This makes sense, and we have other observations from other shooters and systems that support that at the minimum this is how the copper is coming to exist in the first place (meaning the barrel or ammo isn't fucked or something). >soakWith what in particular? I've done chemical soak based cleans before on cans, so have others. While these have been primarily targeting carbon (the dip, breakfree etc), results have been abysmal, so I'm skeptical of soak, especially bro look at the picture. These nugget slags themslves are large, like some of them are the size of a 6mm BB, and being slags they themselves are not that porous so I don't think they'll just straight up dissolve. >increase your cleaning scheduleI mean yeah I could do that. Fucking hate cleaning. >Anderson sport upperThanks, I appreciate the offer, but looking for that billet flat angular look, not the typical forged look. >>64877915>mlok gets hotter fasterNot one of equal mass and surface area >>64877915>>64877904I don't think the issue is the muzzle face or the muzzle device front end is too close to the blast baffle surface because while yes it is pretty close, (0.270") my other cans have comparable geometries (0.350"-0.450" or so) and are not showing ANY of the effect. It very well could be the shittass barrel, but right now my money is sorta on the porosity actually of the 3D printed surface. BIG mechanical adhesion factor. Actually I was just reading publications and writing up some technical analysis for work regarding accomodation coefficient vs surface roughness for various materials. The correlation is very strong. The accomodation coefficient determines the degree to which gas molecules thermalize to the surface temperature (or vice versa) of a bulk as described by a weighted average of specular vs diffuse molecular reflection (momentum vs energy conserving).
>>64877831Picrel of sport upper. I do have unused spare if decide go this route.
>>64877975>Not one of equal mass and surface areaWow thanks for this insightful postEnjoy the gold!>>64877975>It very well could be the shittass barrelNah. Ive never observed copper sputtering even on shot out barrels or like $30 dogshit barrels.
>>64877975>Not one of equal mass and surface areamay I see it
>>64877915>My current theory is that his YHM mount has moved the muzzle too far forward in respect to the blast baffleThat's part of the reason I strayed away from the YHM stuff even on my Turbo. I went with Comstock's Plan B closed tine flash suppressor with the angled cuts since it diverts some of the blast away from the first baffle. I doubt it would've prevented grip's issue, but at least it curtails the effect somewhat.
>>64877975>(0.270") my other cans have comparable geometries (0.350"-0.450" orHow do you know that .080"-.180" would not be enough of a difference to exhibit different behaviors?
>>64877975For what it’s worth I do defer to a variant >>64877915 of this theory. Unless rhat stuff is hitting the first baffle or chamber and then bouncing back. It could be tolerance ix the print but youd almost think something has to be off either in placement or timing. I’d start with bore cleaner honestly. See if you can get any bit of it loose are able to be lifted. Barring that, acid/peroxides.
>>64877944>2 grams removed (mostly the engine paint on outside)After reeweighing this shit it does look a lot closer to 12grams including paint was removed. Got test can much much hotter yesterday while shooting and it had nerve gas coming off it that smelled roughly of breakthrough so I wonder if we didnt have some absorption into the carbon stuck that wasnt cooked out at 15 round point.Giving it an overnight soak in CLR and will weigh after to verify if any gainz to be had.
>>64877976Ty ty but looking for the billet look. Hodl on to that #rare upper though for something else perhaps. >>64877183Love my MP5k. Over 8000rnds through the platform in 2025. Good times, gob bless. >>64877980>Ive never observed copper sputtering even on shot out barrels or like $30 dogshit barrels.Useful unless this barrel is just like a special never been dun befoe type of fucked? >>64877987The precious Mlok rail of equal weight and mass as a quad? >>64877990>>64877992Okay so regarding distance to blast baffle... Measure a plan B setup. Pretty sure it places it even closer since Plan B doesn't have the active spring loaded retention (Plan B chuds btfo) that the YHM Kurze has. Regardless, I don't think it is because the 0.080"-0.180" is making the difference for a couple of reasons. First, if you compare to like a "typical" QD mount setup, YHM Phantom long, Key Mo, SF etc, in those systems the muzzle and MD tip are a solid 0.5"-1.0" further as compared to ANY YHM Kurz setup. It is a reductio ad absurdum with one primary assumption; if reducing this critical dimension from 0.750"-1.00" to 0.350-0.450" didn't cause the issue, then ASSOOMING a reasonable like linear non-stepwise trend (le heckin physiques, thick tight keep us updated), reducing the critical dimension again from 0.350"-0.450" to 0.280" shouldn't all of a sudden cause the issue, since the relative reduction is even smaller. Note the trend assumption though. I think right now this is a surface roughness effect. Pic related, MG7k that probably had 4000-5000rnds on it in similar applications and firing schedule, similar dimension between blast baffle and muzzle and muzzle device end. No copper buildup. Some wire wheel work and all the carbon gone. >>64877999>bore cleaner>acid/peroxidesTy but again... is this really a generalize solution?
>>64878019I’m giving you general info of stuff to try. You want specific, try those copper tarnish removers or pcb etch stuff but make sure it doesn’t hit the inconnel. I will share your pain if you brick your can in this way but I wo t be responsible for it. What had b&t had to say in this?>sport upperSaw too late on the post timing. I’m trying to be rid of my rare wares for cheap.
>>64877800I wonder how much weight you can save by cutting out the center of the pic rails on a quad. I wonder if you can get someone to do this service for you.
>>64878039yeah https://www.dwilsonmfg.com/LMT-Quad-Rail-URX-3-Conversion_p_179.html
>>64878019hich suppressor is it again grip? B&T something, right? picrel is the combo i currently run.
>>64878048B&T PrintX Mini 556 KThe observed buildup occurred primarily with a setup where the distance from the muzzle device end to the blast baffle face is 0.280"
>>64878039I would just mill em myself might be fun
>>64878046A little bit different than what I'm referring to as they make it completely flat whereas I'm referring to just cutting out the center, but I bet Dwilson would do it if I (or someone) asked them to. Same lightning cut that the solgw fags are doing on their top pic now.>>64878068In theory it should be easy, but I say that as someone with no experience.
>>64877831I’d assume so. I’ve only ever used 5.56 uppers as picrel suggests. I can throw my bcg in any upper and the only thing interfering with fit is the extension itself. You can likely just drill the gas tube. Enlarging the port can be done. You might be able to find what you’re looking for already done at Tromix depending on what you’re working towards.
>>64877934About to start running my SS lower more, RC2 with the SF brake since it's integrally suppressed and the can is slaved. Hoping the brake might cut down on the copper buildup you're describing. Barely have a thousand rounds on that can atm but we're training/match season is right around the corner...FWIW Not seeing anything like that on my other RC2 and it's well beyond you're 7k round count. MDs used were CTNs and B&T flash hider, with a little warcomp mixed in. IDK what ammo you're shooting but I've been on AAC 77gr OTMs exclusively for a couple years now and would've thought that might contribute given all the jacket separation claims, but I've never had a single issue (and it prints sub-moa for me)
>>64878180Its not an issue with real suppressors. WGWS case unique for sure.t. Eroded all the suppressors
>>64878016I never weighed my shartfire but breakthrough worked like gangbusters for me. Had about 1k of .22lr through it as well as a few k of 5.56. Mucho worko with bcgs and mds too. A $100 gallon lasted a while.
>>64877800>>64878039Also I forgot to ask, what handguard is that anyway?
>>64877934Does anyone actually read these?
>>64877924You’re not a savant, you’re a faggot
>>64878236no i don't bother reading that narcissists drivel he routinely gets shit on in akg as well
>>64878191>WGWS>UniqueThis is very nice.
I can't go to the outdoor range today its too windy they're closing early
>>64878206>I never weighed it>But it workedBro>1k of 22lrLegit think that breakthrough is only working on the lead. Mine did nothing to the heaps of carbon sitting in my omega.>>64878269Tell them you want to practice your windcalls
Might go to the range but probably won’t cause it’s kinda late and have be done at sunset
California might be the place to be if it gets unfucked
>>64878302Lmao
Jesus Christ and I thought ADM directions were obtuse
>>64877538yeah
I am struggling to find any sort of high speed rifle oriented class around me in OK
>>64878310I can't read snow runes, what does any of this say or have to do with? Is this for some Russian AR?
>>64878340
>>64878340Its for OKP-7 opticExplains basic specs, box contents, etc>>64878337Nice rifle>Cant find carbine classTbh get a good book or two and just hit the range yourself.
T>>64878227Utg pro free float quadrail. >>64878243Take that back. Now. >>64878337Commit crimes hypothetically and test their response time theoretically
>>64878361the virgin "you get the idea" poster vs chad >>64878360 teacher of fishing
>>64878337what courses have you done already?
>>64878363>UTGHuh, interesting rail. Can't tell if they copied Larue or if Larue copied them.
>>64878417Yeah it's not awful and only real complaint aside from obvious one of weight is included screws are potmetal and too soft. Easily solved by replacing them as they are just standard screws
More pics. Might dust off this upper and get a can for it
>>64878180Ty for the dataAmmo has been STV Scorpio M193If you're bored can you measure the distance to the blast baffle front face/surface (closest to muzzle) and the front tip end of the muzzle device (closest to blast baffle face)?>running my SS lower moreyes.jpeg>>64878269NM? Come shoot (assuming you're not a leftist faggot tranny shithead)>>64878310>>64878360I returned mine. I did a write up on AKfiles.
>>64878495No CO, which is just as bad
>>64878495>leftist faggot tranny shithead>unpromptedare you okay
>>64878501BLM land closed? Just don't tell anybody bro
>>64878505Do you feel personally attacked by his statement? Sure seems like it.
>>64878507It's constant 40+ mph wind out at the range today.I will go Thursday, and freeze instead
>>64878509 it's just funny that it was unprompted I already spoke my two cents about all that and no one here wants to talk about allat. Makes me think he's paranoid if he accidentally is polite to me if I post as anon which is gratifying tbqh >>64878512that sounds like a fun time for practice man ngl
>>64878495>I returned minewhy what was wrong with it? AOA m72 finally came on by the way. had to do a little fiddling with the transfer bar but otherwise it absolutely rips. AK trigger slap is pretty wild though. AR's are much better FRT hosts all things considered.
>>64878505It would be funny if wuggy showed you his new pedo chipper project. Did you know the difficult part is getting the top of the torso in? Shoulder gets stuck. Gotta do a bit of chop chop with the saw first
>>64878505>Someone mentions leftists>Immediately BB jumps to defend themYeah ICE is sending you home to the jungle.
Anyone with an AEM5 or OCM5 know how far on that collar does the can sit? I'm going to chop a quad rail but want to know how much I need to take off so I can have a flush fit. I've heard it's only 2.5 inches of exposed barrel, then 2.7, then closer to 3 inches. I just want a flush fit man
>>64878572>Russian dot>Yugo rifleVery WGWS aligned post.>AK trigger slap is pretty wild thoughYeah it sucks
>>64878595https://www.aesuppressors.com/2025/01/03/barrel-prints/Pic rel is a 12" FF RAS on a 15.1" barrel
Made it to the range. Won’t be posting my doubles target transition groups
>>64878600I won't judge you
>>64878613 Haven’t started yet. Just pulled up but they’re always grim, especially with pistol
>>64878620Let he who can post siiiick groups cast the first stone I say. No one
>>64877150How easy is it to get to? I remembered your pics with the tanks and stuff and was wondering if this was the same area.
>>64878668shut it libtard
>>64877753Why bother with that ammo? You're not stacking it are you?
>>64878676reee
>>64877792I had a dream with one of those bcgs last night.
>>64878690Honestly its pretty goodDid not expect it to do as much as it actually did
>>64878692Shartfire OBC /a2approved/?What about KAK Downvent?
>>64878696yes it is (obc) no/meh (kak)
>>64878696OBC + KAK enhanced buffer + tubbs flatwire + A5 tube + 2x 100 yen coins makes for a great time ime. Very flat shooting and pull itself back down like a SCAR without being slow.>KAK downventNo thanks
>>64878699>>64878696That's A2's opinion btw just lyk
>>64878703>>64878702>>64878699
>>64878599So if I have a 16 inch barrel and 14 inch rail, I would have to trim that rail to roughly 13ish inches?
>>64878716The OAL of the KAC ras is 12.25 barrel nut if specs are to be believed. On a 15.1 barrel its leaving enough gap that I feel confident nothing is hitting under barrel whip or rail loading. So that gives us a 2.85" number to work off of. Apply that to your 16" barrel and we get 13.15".Any reason youre not just mocking all of this up prior to cutting?
>>64878236Fuck no.
>>64878269Hopefully this weekend it will be nice.
A lil mistake and the shift turns into a 7am to 12pm ;_; range day got fucked
>>64878692What does it do? I was just scavenging a dead guys rifle and saw he had one so I took it out.
>>64875778do any of you bull queers and prolapsed twinks have the lightburn files for AR engraving and PMAG engraving?
>>64875943its unlawful for that much S0VL to be fit into one picture
>>64875969>Vortex AMG UH-1youre the kind of faggot that hounded the cubscout leader to molest you more till the guy killed himself.
>>64878728Waiting on a few parts to come in before I cut to get everything right but wanted to see if anyone had a ballpark measurement. I appreciate you a lot
Anyone big on SPR shooting? Going next month to practice 100-800m in the mountains.
>>64878669No, the tanks are near Fallon, the Lincoln mine is near Rachel, there’s some cool stuff near the tonopah test range too, a big wooden hangar and some old ammo bunkers
>>64878828Pooping with iPad and don’t have my trip rn
>>64878818Good luck, post build when done>>64878825You should buy a level and a better bipod before then
>>64878828>FallonInteresting. That's in the vicinity of where I'm going next so I'll keep it in mind thanks.
>>64878825a2 is right get thesehttps://www.amazon.com/CVLIFE-Tilting-Adapter-Compatible-Shooting/dp/B0C39TJZ1Rhttps://www.amazon.com/Monstrum-Profile-Picatinny-Anti-Cant-Bubble/dp/B0BWKXHMY4
>>64875792I know its there and I still shoot them across the room
>>64878842>>64878852Good thing I have a leveler on the scope already and have a BOG Deathgrip tripod arriving tomorrow.
>>64878687why does the high council guy have a boy lover logo on his chest
>>64878862Cool.You got good chrono data for your rounds/gun?
Should’ve followed my instincts and not spent 250 dollars on valentimes day bitch blocked me this morning. Didn’t even thank me for dinner.
>>64878881What a curiosity, indeed, anon>>64878814>average eokek enjoyer that missed out on the class action vibe>>64878931I guess meal ticket anon was right. Always follow your gut
>>64878931What a cunt.
>>64878931Nah they always do this stuff. Another shit test. Show up at her work or her kid's daycare at pickup time. They love guys who take initiative.
>>64878895I haven't chumped the change for a chrono yet. I can tell you that its an 18in 1/8 SS410 barrel and I'll be shooting 77 gr OTM AAC. Looking at reviews another guy with an 18in got ~2500 with the most recent batch PSA has been making (caused by the powder shortage it seems).So I'll just have to see if the 800m target will invincible next month. Depending on how it does I might buy bonefrog or something 'premium.' I watched older reviews and didn't see that it's become a shit round recently
>>64878931Next time bring your AR to the restaurant and show it off to her
>>64878931Her intuition kicked in when she realized you are an insane person
>>64878945I think that will be your biggest limit in terms of range.
1) The optic shuts off during firing. For some reason in this setup the recoil of the gun firing somehow ends up applying a vertical force to the brass plunger power switch. Not sure how, but after 6-7 rounds of firing consistently the brass plunger power switch works its way upwards relative to the optic housing and the optic turns off. Some duct tape fixed it for the day, but definitely something I would need to address for use on this gun. It might not happen on other guns with different recoil impulse. Possible fixes are removing the brass plunger power button and applying a knurling texture to it to increase the effective OD. Another possibility is to drill and tap the housing for a small nylon or rubber tipped set screw for adjustable retention/friction on the brass power switch plunger. Some field expedient tape might be the solution for now. This optic was purchased originally meant for my Type 56 SKS Paratrooper project, so maybe the recoil impulse that gun is just different and the issue disappears.2) The zeroing adjustment locking set screws seem to affect the zero. There are a pair of ~0.050" allen hex set screws in the housing which I believe serve the function of locking out the zero adjustment. The problem? Tightening them down seems to move the POI up and to the left by like 12-16 MOA. I believe my first attempt at experimentally testing for zero retention with this optic was confounded by this. I'm not 100% sure, but it appears this is happening, so I chose to just no use the elevation/windage adjustment locking set screws.There was an age when I wouldn't post such /akg/ related content in /arg/, back when you know, words meant something, but this general has become such trash bullshit slop unironically an /akg/ post in it is a step up from the usual content.
>>64878572On neat you bought one of the pre installed FRT setups. Yeah my friend's M72 FRT setup originally made use of the Kono trigger shit and it literally was too painful IMO to use effectively. My last really good working FRT setup used an ALG AKT and it was fine. Anyway: OKP-7 Cont.3) Zero retention is still a bit of an unknown quantity. Because my initial test was confounded by the potentially POI shifting zero affecting adjustment set screws, I was only able to test zero retention with 100 rounds or so of 7.62x39 fired from this gun, and the combination of ammo, platform, and me being a bad shot, makes it hard to determine if zero was retained or lost after this 100 rounds. Pictures related. Zeroing and testing done at 25m. The initial 9 shot before group after zeroing at 25m had a group size of 5.73 MOA, with an offset from POA in elevation of -1.9 MOA and a POA windage offset of -0.1 MOA. The after 100rnds 9 shot group at 25m had a group size of 7.4 MOA (this is pretty freaking bad, like I said, shooter, ammo, platform, rest setup), and a offset from POA in elevation and windage of -1.64 MOA and +1.50 MOA respectively, indicating a potential zero shift of +0.26 MOA elevation and +1.6 MOA in windage.The issue is that with group sizes of 5.73 MOA and 7.4 MOA, I'm not sure how to calculate and or determine the statistical significance of the apparent ~1.8 MOA shift to the center of the group. My hunch is that something like the standard deviation of the offset of any given shot in the initial group from the POA would be a good metric for the resolution with which this setup can measure a potential shift in zero.Again, I would say that the zero retention is still unknown in absolute terms, but perhaps we can tentatively say that there is the possibility still that this gun has acceptable zero retention, especially for a 2-4 MOA AK.
I want a MAWL >>64878931You’re better off king, not even kidding.
>>64878961Is that the Chinisium OKP-7 or a real one?
>>64878572C) Survived so far! I put about 250 rounds downrange underneath the optic. Baby numbers of course, but it has survived so far. No catastrophic breakage or failure, the window didn't go sailing out of the fixture, the optic did fine clanking around in a pile of guns in the back of the truck etc.Overall I'm hopeful this optic can either be fleshed out by the end user to be something truly serviceable, or better yet I'll speak for myself when I say I would gladly stomach a $75-$150 price increase to say, $225-$300 vs ~$150 if the manufacturers can address all the issues we've discussed so far.Wish they improved the optic.
>>64878959I'll report back how it does, might but some a couple 20rd boxes of better ammo just to test grouping and range effectiveness
I can’t even see the blue painters tape at 35 yards
>>64878966>group size of 7.4 MOAChinas strongest warrior>>64878981Gather some data at 100yd will probably be the most useful feedback you get.
>>64878931Take it as a learning experience (all women are shit)
>>64878971I have one in a junk drawer. Been 20yds from a Sasquatch. I know what I got>>64878974Weren't these kind of shit even in Russian form?
>>64878931
>>64878676>5 shot group>meaning anything Pick 1.Only 10 shot groups matter.>>64878683Yes i am. I really like it. Vmax is outstanding.
>>64879060>Vmax is outstanding.Subtle trolling
If im trying to zero an optic, would a bipod or those bag rests be better?
>>64879067For zero it doesnt matter, just put some dots on targets and shoot
>>64879067Laying down and using a bag is my preferred method
I can’t zero a pistol to save my life
>>64879048It’s fine man I have 5 other girls I can talk to it just pisses me off she love bombed me and then turned into a total bitch after I spent money on her.
>>64878931Stick to bettering your ar15 groups and improving yourself for the coming discourse. Women are hobbies nothing more
Pretty cool to watch this thing come aparthttps://www.youtube.com/watch?v=orbKXcVq9q4
>>64879087Fellas, you gotta integrate your woman into your hobbies
>>64879100from the thumbnail i kinda thought that was KCanon then i remembered he is cooked beyond savinggod bless my woman likes guns
>>64879104>thought that was KCanonsame. I was about to have an Alfred seeing Bruce Wayne in an italian cafe moment
>>64879095I fw OCL (Andrew). Love to see good cans made affordable for the common man.>Pretty cool to watch this thing come apartYeah that shit got liquidity lmao
>>64879104>>64879112Trust me gentlemen, I like my women without the penis and my music after the 90s
>>64879118>I like my women without the penisWith or without a penis I hate em
>>64879087Yeah some dumb bitch is showing interest in me because she doesn't know how much of a trainwreck I am. I don't want her to spoil my focus and start whispering that poison in my ear, telling me lies like "you're good enough" and "I like you the way you are." Fucking gainsgoblins.
So is "FDE" just whatever the manufacturer feels like?None of the FDE colors are the same across multiple manufacturers.Its not a huge deal I guess but I would've just went with ODG or coyote brown if my colors aren't going to match anyway.
>>64879087To be fair I did tell her I wanted a few days to think about things because she didn’t seem to care about me or my life and then she blamed everything on me and blocked me. Like it’s my fault she’s got a kid and love bombed me then decided that she wasn’t interested enough to care about what I’m doing or my life. It’s so dumb man. No wonder her baby’s daddy is a 12 time convicted felon and she got divorced from her first husband. She was so hot and cold with me that it made me sick to my stomach. Never not listening to those feelings again. She’d be like hyper interested in me one moment then ignore my texts for 12 hours the next and complain about her family all night when she did text me back. Really annoying toxic shit.
Offset ACOG kinda goes hard
>>64879149>baby’s daddy is a 12 time convicted felonOh hell no these types always come back and say they want to be a part in the kids life and then just make a mess of everything. You date her you're dating him too.
>>64879118Excuse me?https://www.youtube.com/watch?v=rIdjLL13gdI
>>64879143Cerakote or rattlecan for an even color is my best suggestion. Flat Desert Earth sounds to me like any color that is matte and dirt/sand color, makes sense with manufacturer varaibility (also material considerations. Certain dyes can make plastics/polymers weaker)
>>64879149>No wonder her baby’s daddy is a 12 time convicted felon and she got divorced from her first husband.Ok there's no way this is real now
>>64879173I was looking for a picture like this. I found one from the redditors but have lost it. Wish I could find it for green again.
>>64879166That feels backwards>>64879169You are excusedhttps://www.youtube.com/watch?v=8GGMdMo61_o
>>64879167He’s in jail he got his probation revoked. Facing 12 years. Also got a felony for stalking her. I didn’t know this until I found the court records. She didn’t tell me. So that was another reason I wanted a break. She claimed to be a devout Christian and said she wanted all the things I want but now I think that was just to reel me into her toxic life and use me.
>>64879118i meant the gun looked like KC’s and he mightve found a nice girl>>64879137unironically this>>64879149ok this reinforces in my hatred of foids
>>64879216Yeah I know, just clowning on KC
>>64877861railscales if you don't like gloves, i like the minidot pattern
>>64879166there's a guy on here who has iron sights as his primary and an offset scope. unfathomably based if you ask me.
>>64878728Can you post a pic of that recce rifle without the suppressor? I want to see where the collar sits with the rail
>>64879400Sure once my wife gets done busting my shit wide open
>>64879427
kcanon told me he’s attracted to prepubescent boys if that matters
*big bossmy bad
>>64879521lol fag.
>>64879143>this post in 2026Pottery>>64879067Sled indoors. Otherwise you have to increase the sample size to shrink the statistical uncertainty that might swamp the systematic bias that you're trying to zero out in the first place. >>64879245>>64877957>use my gloves for once>don't like gloves2026 and there are people in /arg/ that think using gloves is optional. Ridiculous. Bring back the bully.
>>64879534You got that gene that makes you puff red when you drink, Chinaman?
Haha completeNow the empty feeling of no projects to do begins to settle in...I think I'll spray paint it.
>>64879548hnnng urgi close enough
>>64879548This needs one of those knockoff acogs from the facebook ad.
>>64879565Why I have the real one already on therePatiently awaiting its spray paint
>>64879568Looks.
>>64879574Yeah I was kinda hoping the spray paint would just make everything blend together FDE is actually ass but a decent base for my area
>>64879580Not the color I mean the shape. Does anyone else get what I’m going for? They do look really good with paint on them though.
>>64879583The rail is actually heavy and plastic is better if you don't need a LAM unfortunately but I like how narrow it is.Also the indexer probably needs to move the front 1" of rail gets unreasonably hot shooting supressed.I'll find that out later when I try out these parts at a range.
Is there a better equivalent to brownells retro furniture? Havent had much luck on the surplus side. Usually beat to shit for the same price point.
>>64879548>completeoh?https://www.ebay.com/itm/187930455860
>>64879619I was looking at that a few days ago but I've heard horror stories of guys stripping the screws trying to get the factory mount off.I was thinking the next step would be a dot on the ACOG possibly.Or I just buy more ARs because I'm in a postmodern AWB bluestate...
>>64878417Marky mark followed the proven formula: a barrel nut you can shim and time out to mil-spec torque values, a positive lockup between the handguard and barrel nut (certain manufacturers *cough cough*wilson combat* manufacture a certain amount of slop in the interface to be less demanding on correct timing), and a modicum of thought given to rigidity.Even the match dudes who just need free float handguards and use a pinned FSB have the correct idea:But for shooting point-blank distances (0-200 yards) with a LAM or BUIS your standard basic friction fit rails work fine. Only the Larue/Troy hipsters and KAC hypebeasts disagree.
>>64878417>>64879653Oh, forgot to mention the poverty "tube" handguards like UTG get the barrel nut wrong in case you were wondering (cut en masse overseas, can barely achieve mil-spec torque (I've seen 30 foot pounds in some manuals), and have to do insane things like rockset your handguard to the barrel nut even if you can.
>>64878284>metal wasnt shiny>metal now shinyIt got the baffles so clean I was able to detect a tiiiiiiiny tiny baffle strike going all the way down the can. Yes, it pissed me off. Same with my Omega 45k. Except for the baffle strike. Blast chambers face on both still dirty. When I soak MDs and BCGs in it they come out looking new. I would fuck with it some more before writing it off.
>when a $2 accuwedge adds $500 in value to your ARHmmmmm
>>64879733Sonny this here colt. I knows what I got.
>>64879733TIL what an accuwedge is, never heard of this before. My first thought is how mismatched/out of spec must your lower/upper be to have that much slack to warrant this doohicky
>>64879743Pretty sloopy even though I bought the upper and lower receiver from the same company. Different coating as well. I bought the accuwedge and it fixed it cant be fucked to care about the coating
>>64879743>being this salty over dropping big cash on an AR when you could make it "premium" with a set of O-rings
Accuwedge is just cosmetic, no? Seems like chasing diminishing returns and spending time and money on something that isn’t even yielding good returns.
>>64879793Its like 4 dollars bro the slop is annoying
>>64879801I was more meaning that it will take up slop but that it doesn’t really matter. You could probably just print or make one, but whatever works. That was one feature on Aeros that was marginally interesting. The tensioning screw.
>>64879805>but that it doesn’t really matterYes it does because its annoying. I also thought the aero tension screw receiver is a good idea
>>64879801Unless your lower/upper is out of spec, you don't need it. Actually, you don't need it at all. At best it makes the rear push pin require a punch to get out instead of just being able to push it with your fingers and at worst it breaks and a piece of it works gets loose in your lower or stuck in the trigger and results in a stoppage that requires separating the upper and lower to clear.
>>64879811Bruh its a piece of rubber that puts a little tension on your breakdown pin.That's itYou could do it with a bit or cork and a knife yourself in 15 minutes.Yeah, you have to use a flat end or knife to get the breakdown pin out, oh well.
>>64879815On a bench gun or range toy I'm with you, but if it's a gun you depend on I think it's good to be able to separate the receivers without a tool.
>>64879811Its not about need its wanting to not be annoyed by the slop. Its as simple as that>>64879819 Use a bullet from your mag and push the pin out
>>64879825It's nearly as annoying to need a tool to separate the receivers, if not more so...I've seen people use O-rings on the lug to solve the slop problem and some people put a foam earplug under the lug, but all of these solutions make the pivot pin harder to use. A tradeoff I guess.
>>64879830>It's nearly as annoying to need a tool to separate the receivers, if not more so...Its not something you do often and when you do you will always have a bullet nearby to do it>A tradeoff I guess.Yeah
>>64879805As somebody who's owned three aero lowers take my advice and just rockset it down out of the way.It never stays adjusted.
>>64879166>quad rail on a delta ring with an FSB with an offset ACOGI've scrolled past thos multiple times and have forgotten to mention how fucking trash that actually is.Keymod would make it it 100%
I am honestly glad another anon is having schizo woman moments at the same time as me, really brings the camaraderie of this place into perspective. That being said my AR15 build has hit a snafu I am unsure if I want to continue it’s current trajectory.
>>64879960I found her ex on fb and he’s actually schizo like posts legit terry davis esque schizo rants. He talked about what an evil woman she is, and even though he’s a druggie criminal schizo I’m inclined to believe him. But at least I’m already talking to a younger hotter woman with no kids. And yeah I can’t decide on what to do with my gay-r 15 either. Suppose I’ll try the new eotech for a while and see how I like it. Just need it to be back in stock.
>>64879074Why do I see cock and balls
>>64877886So long as your can doesn't have aluminum, titanium or adhesive inside, you can plug the endcap and pour some of this in. Let it soak about 30 minutes. Follow it up with hot water to get it all out. Then heat the suppressor and make sure it dries.
I missed out on my Midway birthday discount and didn't gunsoom. Damn
>women with out tailsNo thanks
>>64880022It’s hereditary so her kid is schizo too most likely. You dodged a bullet.
>>64880179your mind's eye sees what it most desires
>>64880272>women without hoovesungulate master race
>>64880179The gun is names Savage for a reason
>>64880272I agree
>>64880273That kid doesn't stand a chance growing up in that environment
>>64880273Yeah that’s what I was thinking. That kid is gonna be an absolute menace. Single mom, dad in prison, genetic disposition to violent schizophrenia and drug addiction. Feel bad for her to be honest
>>64880324She'll make a good future stripper/OF girl
Can I just wrap or paint my stainless steel barrel if I dont enjoy the look without affecting anything? Local pawnshop has a deal.
>>64880394Yes.
>>64880394No that makes mustard gas.
What should I be basing my zero off of? I flip flop on this. M193? 77gr? 1:7 twist. I shoot m193 more often, but not sure if I should just learn to hold and instead zero for the good shit.
I have a driven arms scg grip and an lmt enhanced trigger guard. The trigger guard ears (the gap) hurts really bad with this combo. Wondering if it’s normal or if my lower ears are sharper than they should be.Ordered an ergo plug thing.
>>64880443Gapper or just ditch the LMT trigger guard for something that actually covers that area
Obama acog glass clarity be like uhhhhh let me be clear
>>64880458That trigger guard is never coming out.Roll pin was the biggest pain in the ass to get 80% of the way in and stuck. Ended up having to try to back it out for it to get stuck at about 70%. Ended up drilling into it to break it up some before being able to pull it out with a vice grip.The replacement went in correctly but it took a ton of swings with the hammer. It’s an lmt mars lower and I guess mine has super tight tolerances. It’s a pretty desirable trigger guard though right?
>>64880440Zero with 77s and then shoot 193, the minuscule amount the zero will be off will only be noticeable at distance. >>64880394Blasting the barrel will help the paint stick>>64880201>/arg/ using copper solventsNo no no careful bro we dont need a repeat of the dude with the SR25
>>64880440Honestly anon it depends. If you're larping at classes and pushing your good shit often at the range, i.e. making full use of the good ammo, then I would zero for the good ammo. If it's rare to actually shoot your good ammo, or to need to, I would zero for the ammo you use most often at the range which I assume is the m193. You'd be wasting ammo reremembering poi shift between the good ammo and the range ammo and might calcify bad muscle memory for when you ever need to use the serious ammo. That being said understand you'll probably be using whatever you're zeroed for in an emergency but it's unlikely m193 would be insufficient
>>64880470>dude with the SR25qrd
how is reality winner a real name
>>64880475>Wineo leaves copper solvent in for too long>Ruins barrel>Complains to kac>They tell him to pay for it>He mad>He does it again>Blames kac
>>64880503how long is too long in this scenario?
>>64880524Depends on the specific copper solventSome are 24hrSome are extremely aggressive and will destroy your shit if you leave it too longEPA and toxicity has dialed it back a lot all things considered. Butches boreshine is nolonger shipped like sulfuric acid and contains half the people melting chemicals it did even just a couple years ago.Its really not a concern for blaster rifles and most autistic bore breakin shit is complete fuddlore and not even remotely applicable with an autoloader.
>>64880469>It’s a pretty desirable trigger guard though right?Nigga it’s still just a trigger guard.
>>64880469>It’s a pretty desirable trigger guard though right?eh, it's no FCD winter
>>64880469Use the wheeler trigger guard pin tool I had a lower that was the same until I used it.
>>64880538I'm begging you, please get new pictures.
>>64880503That anon posts his guns on /pol/ all the time
>>64880642Already posted new OC itt>>64880643Yeah hes doing a lot better now, good to see
>>64880538>Some are extremely aggressive and will destroy your shit if you leave it too longSo less than 24 hour? I just read the label and go off that and some minor googling
>>64880618I actually used my crow gun works tool which is essentially the same thing.It worked like butter on my last build many years ago.This time, when the pin got stuck, I muscled it and the screw literally screwed through the handle, making the tool worthless.I’m telling you, that pin was TIGHT.It’s also because I forgot to oil the pin. But even the oiled pin was super hard to get in.
>>64880655>>64880642>I already posted it dudeFascinating
Which buis you guys use?I want the Troy Hk style ones.I hear people are pissed they hired a ruby ridge sniper but as far as I’m concerned, this makes me more confident in the product.
>>64880669>Childshooter buisPoorly made anywayBuy magpul pro buis if you want a functional pairBuy KAC if you want an aesthetic pair>>64880660You will be fine if you keep to it.
>>64880674>if you do things right they will be rightthanks for the affirmation
>>64880687More paint has been scratched off. Consistent with screwdriver marks, hm.
>>64880674>childshooter buisSeems like they would know how to make a good product tho
>>64880738israeli claws typed this post
Ive never once needed to use BUIS in over a decade of shooting
>>64880789BUIS are a remnant of days past when optics were dogshit and people still used Eotechs (lmao) and would need new batteries every op. Nowadays you only ever need BUIS if you purchase chinkshit like Holosun or whatever is the flavor of the month optic on Reddit, like Eotech.
>>64880789I have twice. Broken eotech almost ruined my range trip but I had irons. Second time was a athlon scope that broke when I dropped my gun on it.
>>64880796I run holosun and eokek optics and neither have given me problems. I keep two cr123 batteries in my grip just in case.>>64880798How did you break an eotech? Was it the 512 or something?
>>64880674>Supports only specific childshootersWow dude how morally upstanding of you
>>64880804xps 3 that just stopped turning on. I changed the battery yet it was just completely dead. I sent it back to eotech and they fixed it. Something inside must have gotten loose.
>>64880778A2 loves Israel if they dress up like trannies for false flags
>>64880731>oh anon is doing great. He told me recently he's learning forensics on a Japanese forum!
>>64880796I like them because they act as a good reference for zeroing optics as my biggest actual functional reason.Apart from that:>look cool/ are a big part of the modern rifles silhouette.>sometimes you just want to shoot an iron sight.>its an emergency sight.I just don’t see why you wouldn’t get a pair unless money was an issue or your gun is already loaded with extraneous things.
@grok said buis make sense for a fighting rifle.
>>64880669Troy BUIS are good. This is a Christian general, we forgive Troy and don't hold a grudge over something that happened over 30 years ago. Any user telling you otherwise is likely a chicken swinging demon who rejects Christ, practices primitive and barbaric infant genital mutilation, and wields vastly disproportionate influence over our democratic process and institutions.
>>64880824>good reference for zeroing optics as my biggest actual functional reasonthis
>>64880833>rejects Christ, practices primitive and barbaric infant genital mutilation, and wields vastly disproportionate influence over our democratic process and institutionsshut it down. NOW
>>64880811How long did you have it before it stopped working?
>>64880824Unity doesnt make enough room>>64880834Doesnt work with higher optics
>>64880859Are you seriously high right now?
>>64880874dude
I have a question but I will save it for the next thread:
>>64880941I'll make it in 4 hours, just hang on
Baked & faked>>64881117>>64881117>>64881117>>64881117
>>64880669I have the midwest hk style front sight and it's been fine so far. It looks exactly the same.
>>64876580how big of a pain in the ass is it really to install these larue rails? was thinking about getting one of the mlock ones to replace the mcmr i have
>>64881959It's very easy, just need a strap wrench if you don't already have one.
