Clean Your Guns Edition When is the last time you cleaned YOUR guns? Guide: https://files.catbox.moe/9g5sv2.pdfPastebin: https://pastebin.com/gs6mLNikPrevious: >>64883629
As little as physically possible so many years in most cases. Unless it's a collector piece I shoot guns until they stop working which pretty much never happensPic unrelated
>>64888562clean guns?just buy a new one
>>64888562Am I on crack or is the front of the cylinder on that GP-100 shaved down?
>drop safeStop dropping your gun wtf
>>64888562>Clean Your GunsNO
>>64888562I need to replace the middle to corret the image un quality
>>64888623That's a Wiley Clapp model I think, which have melted edges on the cylinder/frame/muzzle.
Won me an auction last night on a S&W 500 for $899 ($1000 after shipping and taxes). Gun certainly has some wear in the pics but its all cosmetic and will be easily polished away. Spending the money I saved on ammo instead.
>When is the last time you cleanedOk, I'll do it this time
>>64888656I spy that cgs tool. A man of culture.
>>64888562I clean them if they're going into the big safe, whatever's not in the big safe just gets shot and lubed until the next time it sees the big safe. I love living in the desert where nothing rusts or rots.
Is this normal wear for the under side of a Glock barrel? There's some on the top, too, but less.
>>64888809jfc warranty that thing before it kills you
>>64888816>warrantythis is a $80 overstock part from spectre supply, as long as it emits 9mm from a G35, it's finebut, looking at that wear, I probably need to find something else, soon
>>64888834It were sarcasm, anon, that wear is perfectly normal.
>>64888849thanks, I'm too tarded to get that
>>64888855It does vary, some do more, some do less, notably people have said the GenV Glocks wear more noticeably than previous ones and it's often attributed to tighter fitment, and the finish on the barrel of course makes a big difference in how it will wear. It's gotta be really excessive to indicate an issue.
>>64888873It looked unusual to me, because I didn't even shoot it that much, but it might be because it's the only bare non finished barrel I got.
>>64888877One of my P226 barrels got smiley chatter marks after like 3 magazines, my old M&P still doesn't have any after ~7,000 rounds but the barrel hood shows some wearIt be what it do
>>64888562.22 enjoyers please how could I custom my MkIV 22/45 Tac a bit ? I want to like it, but I don't currently. Upper rail is too big, irons are quite meh. I'd need a small red dot, not mailbox-tier. Also 10 rounds but i'm stuck with that.>when I say "custom"I just mean small improovments with small new parts, not fully different slides or else. The overall aesthetic should remain quite the same I guess.>also i'm euroTandemkross and Volquartsen (and maybe Ruger) are shipping to Europe through EasyExport. I could probably buy non-ITAR parts. But no mags, no full slides or frames, and so on. Any input could help, thanks, moreso from MkIV enthusiats.
>Beretta rebate is going on so finally a good time to pick up a 96a1>Check out how much an optics cut will be >385Wtf Langdon is out his damn mind.Has anyone tried dual hammer? Not like it's that much cheaper.
>>64888987Langdon included plate, Cerakote, new front sight, and new decocker conversion Dual hammer does the beretta OEM cut last I checked which isn’t as good and to get it close to how the Langdon cut is
What should I add to the collection next
>>64889002Glock, p365, or another sp101 but in 22lr
>>64888959Look at vortex and holosun for small optics. No need for a trijicon rmr or sro on a 22 plinker. You can always remove the rail or irons. Maybe an enhanced bolt or trigger. >yuro Yeah can’t help with that.
>>64889002a hammarli 208 or other target 22lr
>>64888959If you are looking for low profile red dot mount, they tend to be sold by smaller companies like lobos or madd macs, is there anything available for europes?
>>64889002Walther P99, PPQ or PDP
>>64888997Hmm, I wonder if langstein will knock off some bucks if I ask for no new front sight and no cerakote. Probably not knowing that Jew.
>>64889057POV: you asked Langdon for a discount Get the inferior beretta cut, a few shops do it.
>>64888959Grip panels in your favorite color/woodDitch the rails and get a Madd Macs or Lobos direct mount and put an RMR or Shield pattern optic on it>>64889002.22 silencer followed by a .22 pistola
>>64888562Haven't cleaned or lubed my 92 in ages. It's starting to not lock back on empty mags so I'm going to have to lube it soon. Could have been the ammo too.>>64889057They don't charge less for no cerakote, but you get it back quicker.
>>64889118anons have noticed that between frames the mag release is in a slightly different position so mags can either sit higher or lower in different frames. you might have a low sitting frame so you might need stronger magazine springs (?) or follower tuning or something to get the slide to lock back more positively.
>>64889179>OPERATOR>TACTICAL>RESPONSE>PISTOLThis isn’t as bad as “grip zone”, but it’s close.
>>64889213t. not an operator or tactical response pistoler
>>64889217>tactical response
>>64888562>Clean Your GunsI clean every time after shootingI enjoy the smell of g96I wipe down the frame with 91% isopropyl alcohol
>>64889246
>>64889218Do you teach hide in ditch-like-bitch class?
>>64889247You can mix some gun oil into the IPA, that way its not fully degreasing the gun. We also sell a break cleaner that contains a very small amount of lanolin. Just enouth to prevent flash rust and dry skin
>>64889077Curse you Langdon!>>64889118Oh nice good to know
Langdon cut doesn't seem overpriced, it includes the refinish and plate, and sights. You'll end up needing those things anyway.
>>64889326Si si, it’s a good deal senor!
>>64889334O sea, no son una tienda cara. Trabajan con Glock y son más baratos que Maple o Jagerwerks, igual que Battlewerx, pero más caros que Wager.
>>64888809Wear is actually great. It shows you practice with your funs.
Touch grass they said
>>64889287Frame is polymer. I don't want a greasy frame.
Does anyone make an extended guide rod for the beretta 92?
>>64888891Walther mogs based on this. It's honesty insane how cheap they are compared to their quality. It's a 1/4 price HK for something like a PPS.Also in other news. Jay at EA told me a slide stop spring for a Five-seveN hasn't been available for 2 years. WTF FN! He's currently having them made as they're a common break item apparently.
>>64889359Many years ago I was at the local range and was talking to an RSO I was friends with. He mentioned that it was a red letter day as the man who made his very expensive custom 1911 was coming to visit. I hung around until the man showed up.I will never forget the look of reverence on the gunsmith's face as his fingertips traced the holster wear on the 1911. The RSO looked a tad worried and apologized for not taking better care of it. The gunsmith waved him off and said "This is what I always hope to see and never do.Shoot your guns, people
I bought the XD (non-gripzone) because it looked like the resident evil gun.
>>64889370The compensators that are guide rod mounted use them
