Sports Illustrated Swimsuit editionPrevious >>65422878
First for fuck you guys.
First for ash will be a real woman and there's nothing you can do about it but seethe.
>>65429594first for M4gery
PSA 11.5 SBR?
Can coming Soon™
>>65429798Cans are fucking wiped out at every gun store in a 100 mile radius of me lel
>>65429840I'm in a cucked state that still requires they be "legally registered" per state law so I just ordered from Capitol Armory
Should I get a cheap quad rail to chop up for my mid length FSP or bite the bullet and just get a C4?>>65429840NTA but I bought mine a week before everything happened thankfully. It should be delivered by Thursday.
Tell me why its bad. 13 oz with built in active retention and only 4.75" long sounds nice to me.
>>65429865>Tell me why its badI dont see why it would be. Baffle stacks worked for decades, I cant imagine whatever new flavor of 3d printed design comes out this week would be worse.
>>65429840I got mine last week. I felt like the last chopper out of Vietnam. Yeah, I had to form 4 it, but everything went smooth.
>>65429864Centurion good
I see your raised laser and I raise you raised laser
>>65429947hebby
i like acogs but i also like iron sights
What's the best ACOG and why is it the TA01?
>AR15 boyfriend
>>65429997What about Ash? He's blossoming into a woman so you wouldn't have to be gay anymore while still getting to pound bussy.
>>65429983tritium sucks
>>6542995112.4 lbs womp womp (unloaded)
>>65430000I don't want an illuminated reticle during the day
>>65430006just put a piece of tape on it
>>65429999>What about Ash?literally who????>you wouldn't have to be gay anymore:/>getting to pound bussy.ewe
>>65429999>>65430000>back to back quads
>>65430008Or just buy the model I need
>>65430015or just get the battery one
>>65430017groce
>>65430009
>>6543004614.5" was invented so they could put a fuckin standard bayonet on it
>>65430156>obsessed
>>65430165>obese
>>65430156I don't like being reminded that this is what /arg/ posters look like. Just a fat body that looks like getting a drivers license scares them
>>65430178Mac n cheese with hotdogs for dinner. ...every night.
>>65430156this is Ash?wow she actually looks pretty nice!
>>65430197yes
Ok I need a QD mount the get the RH25v2 positioned correctly in front of my ACOG.What are my options?
https://www.youtube.com/watch?v=on8CAgKi1Sw
>>65430206ADM qd mount and just use shot correction
>>65430156>roiding for this
>>65430206SBR pictailandAdm, oasys FTS or chs fts
I'm in the process of building a loaner NV capable gun. Would you guys go 11.5" or 16", I don't plan on taking it out of my state and doing a form 1 is cool with me. I usually fall into the 14.5" camp but this is a loaner and back up for me if I go to a class. I already have a lower put together, so it just comes down to an upper receiver.
You ever pop a single shot off in your basement (at a level 4 plate ofc) just to find out if anyone would hear it and call the cops or anything?
>>65430376First off, fuck the form 1. NFA is dead nigga. 2nd off, 11.5. Because I want an 11.5 and 16 is actually fucking gay. Especially with the NFA dead nigga.
>>65430400>take your legal advice from 4chanEven dubs won't get me to do that
>>65430421Bitch nigga.
>>65430421>Even dubs won't get me to do thatwhat about quints?
>>65430429>>65430400post your SBR if you're so cool
>>6543037611.5if its a night gun you're not going past 1-200it needs a can on it to suppress the flash, which adds length and weight, and an IR pointer, which adds weightif you added those things to a 16" it becomes unwieldy and heavy and you don't need the velocity for hipshooting at whatever you're hitting with the ir laser pointer and 16" guns with cans a just a 1x red dot look weird, 11.5" guns with a 1x red dot look normal
>>65430528I post my SBR all the time.
>>65430376Millions of niggers with glock switches and your still worrying about short barrels? Do you think the ATF is gang stalking you? Slavery is a choice.>>65430400based >>65430421cringe
>>65430595I follow the laws and stand with israel because I'm not a shitskin like you.
>>65430602I live my life as a free man and love it. Overtime everything has been catching up to me, this new NFA mega dunk has been very pleasing to watch
>>65430544It's a loaner gun for NV, not my first rodeo. I plan on shooting it maybe 1000 rounds a year so I really don't care about what the upper is
>>65430156>heAre we sure that's not a pooner with those shoulders and fat distribution?
>>65430684When you're obese for long periods of time you become androgynous due to hormones being out of wack. I still refuse to believe /arg/ posters are as dysgenic as we've been led to believe but mainly for my own sanity. Myself and close friends all take physical fitness very seriously and I project that onto everyone because I don't know why you wouldn't.
>>65430707I mog you
>>65430724I'd make you wear kool-aid lipstick
Finally got the MARC 12 out to 1000 yds. Thinking about building a mini mk12 next in .300 blk.
these niggas finally came out with an OE-looking safety selector lever. What's next, collab with Radian for their pins? ARC-Fire also has theirs with the similar looking lever but has the slide-on pins already. Going the China route releasing cooler models later irritates me.
>>65430827I have one of the older atrius in my rifle. Kinda wish I had waited for this one. It works fine, but the lever is noticeably thinner, which makes me worried that it will fail over time.
>>65429789dat bih tuh
>>65429594This picture gives me feelings. And feeling are gay. OP is a homosexual rapist.
>>65429865It identifies as Bri*ish.
>>65430739
Would you reckon an Armaspec SMB H3 would cycle with a cassette style FRT out of an 11.5?
>>65430929I don't see why not. I've never used those type of buffers, but if it really is an H3, or at least an approximation of the weight, then it should be fine.
>>65430938I should get an H3 buffer before tungsten triples in price but the Armaspec H3 equivalent was still about $55.
>>65430929as long as the gun is pushing enough gas to cycle an equivalent spring and buffer, yes. Those captured buffer systems function the same as a spring/buffer normally does just in a neater package. If it were an AR9 you would run into some potential compatibility issues but on a regular AR it should be no issue shooting an intermediate cartridge.
>>65430750That's nice
Is there even a point in buying Eotech, barring cloning purposes?
>>65431029NV capabilities and because they look fuckin sick
>>65430156Septum ring theory
Lower I just put together.Might trade the stock in for the QD version.Really hoping the captured buffer works well with the trigger.Total bitch to get in past the hammer btw just about had to force it in.Went with the non-rubberized K2 this time, tried to keep it cheap
>>65431052Whoops
>>65431057Had a Griffin Arms MK2 I wanted to put together but the OD green doesn't match the red tinted "brown" annodizing.Might try a rifle length tube and a nicer two stage trigger on that though
>>65431052>>65431057The secret to the captured buffer system install is to remove the buffer retainer pin and hammer. Makes it was easier to do. Since you have a cassette trigger, you'd need to basically take the entire lower apart but it will save you the headache.I don't think my buffer is going to ever come out of my AR9SD now that it's in, working that motherfucker in with the ejector sucked.
>>65431082The roller delayed buffer especially is a real bitch because it refuses to compress
>>65431082Yeah I was about to take the trigger out until it managed to magically slide itself in when I applied pressure at the correct angle.It's gonna stay there Im hoping it'll cycle most of my uppers it'll be my dedicated FRT lower.Depends on if the captured buffer cycles properly.Really wish I got the QD version of that stock though.It was actually a bitch to put together the buffer retainer kept locking up because the buffer tube would cant when I tightened the castle nut.Had to hold the tube while I tightened itShould've just picked up a new tube but I had a PSA one sitting around.
>>65430827>>65430870Atrius are dumb retards I told them to do this over a year ago and ended up modding my own. Their shitty lever just bends and breaks anyway. Buy ASD. >>65430750Mini Mk12 in 300blk is great idea.
>>65431129Yeah fuck that Rare Greed or bust that arm looks like snap city.I'd like to try an ARC or even something else just so I could use it with nice triggers but my gay state banned everything last year lucky me I panic bought two Rare Greeds(akshullay a rebranded Delta Team Tactical or whatever) for about $1000 because I had a feeling they wouldn't be legal soon.
>>65431129>Mini Recce 300 Hmmmmmst'v'd've
>>65431139>Snap cityThe shills never sleep, I'm not buying your bullshit Rare Sneed
I think long barrel .300's are a retarded idea but I'd still like a supersonic .300 exclusive at some point.Maybe it'd even justify 16" barrels
>>65431171>supersonic .300Winmag
>>65431129>>65431139I have about 500 rounds on mine, and haven't had any issues yet. But I know at some point, it's going to snap. Just hoping I at least get a couple thousand rounds before then.
>>65431167I was watching some autist talking about his Atrius snapping on YouTube last year.I like the ARC idea of being able to use your own choice of trigger but that tin metal just looks weak and janky as fuck.Still don't know if its worth putting an FRT of any variety on a "fighting rifle" but I really hope I can get one to cycle subsonic .300s reliably.That just be the coolest shit ever if I can get my .300 to cycle subs through a can with an FRT reliably.I'd strongly consider dropping 5.56 over it even if .300 just werked 100% of the time.
>>65431177Yeah should really just go all out on a supersonic 30 cal putting together a 16" .308 right now.I think an AR that's has similar balistics to an AK is neat tho.
>>65431183>Some guy had his breakDudes have had entire firearms catastrophically malfunction out of the box, everything has a chance of failure. It's so simple to repair or repurchase rather than do the whole "muh atomic combobulation of nickel with muh steelium 49 oxide rapid cooled under heat" anyone saying otherwise is a shill that wants you to spend at his stall rather than john's stall
>>65429864Chop a bcm.
>>65431129on some platforms, you have to dremel a bit of the upper receiver material away so the Atrius or ARC-Fire doesnt get caught between the upper and the bolt. I've put around 2000 rounds already through this lever and its been fine. I also shaved down the bottom of the Atrius lever so the trigger reset travel is only about a millimeter. There's videos how you're supposed to tweak the lever a bit by taking some material off. I can see why people dont want to do that.>>65431183>Still don't know if its worth putting an FRT of any variety on a "fighting rifle"because its cool to have the option to mag-dump into your enemies, gayboy.
>>65431232I hope she has a penis
>>65430750Who sells those stubby grips?
>>65431241onyx arms?
>>65431265Yes thank you.
Need another ar10 lower
AR…11?
How to stop upper from wiggling?
>>65431365AccuwedgeJust took mine out because it makes taking the upper off a pain in the ass
>>65431367Can you send it to me through the mail?
>>65431375>>65431365cut a foamie earplug in half and jam it behind the takedown pinor accuwedge from amazon for $0.12 plus $5 shipping or deal with it you dont lose zero from it
>>65431367Good news>Wiggle stopsBad news>You're only taking off your upper with a hammer and punch
>want to install FRT>tfw really like my triggeris there anything to convert my current trigger to an FRT or do you need a full new trigger assembly
>>65431821yes but it depends on the trigger and type of FRT. Super safeties and ARC can use a fairly wide variety but requires cutting part of the trigger (see the SS trigger cutting jig for reference).
I want an M203 at some point. Should I do an M16A1 clone or CoD 4 Sopmod m4gery
>>65431832do it
For the anon last thread who asked about the battery powered illumination, I hardly use it on the TA02. If I could get a TA01 with the forward mounted dot positioning, I would.
>>65431848Whose bright idea was to add a grenade launcher onto carbines?>Starting to get into BAR weight territory>For an attachment that is seldom used>becomes dead weight when you run out of the miniscule amount of grenades you're carrying on your person
>>65431879>I hardly use it on the TA02You don't use it in the day time?
>>65431848in due time>>65431894ideally I'd like an M79 but I ain't paying $10k
The DDM4 Lite quad rail is way better than the RIS II railIt is the canonically correct free float quad rail for 11.5s
>>65431902DDM4 quad is very nice. Light, feels very secure, and it's surprisingly small for a quad rail so it doesn't dig into your hands like other quad rails.
>>65431139>snap cityKek exactly. The Arc lever is significantly more robust. >>65431162I'm waiting for an optic like the Primary Arms 1.5-12x36 but with uncapped turrets and a not shit reticle and then I want to do a neat like 11.5" GPR thing. >>65431171>supersonic .300 exclusiveEh. Like I sorta get it. 9-12.5" is more than enough. >>65431183>>65431232Yes I've watched Chris' videos and chatted with him and I've performed the clearancing work on both the upper reicever and I've reduced the cam profile to minimize the magnitude of the reset itself and I still snib snabbed levers because guess what... The levers themselves are just too thin and weak.
>>65431910Thank you for validating my opinion anon <3
>>65431899I have the crosshair reticle. No, don’t really need it.
>>65431934Tell me why>>65429865 is bad.
>>65431949Nice rifle. I'm kind of in the market for an Acog because I just want a different optic than red dot or LPVO - but between the battery one or the TA31 they all seem to (almost intentionally) have massive drawbacks.
>>65431988the only drawback is eye relief and I guess being fixed magnification
>>65429865From what I've seen the at muzzle suppression and the flash hiding isn't the best. It probably isn't terrible, and it is pretty light all things considered at 13oz (if that is even true) with the integrated mount. My issue unironically is with a) how it looks, and b) the attitude of Sean Bernstein the le hecking tyfys vet turned I guess engineer/CAD monkey with respect to how it looks. I commented on IG a while back being admittedly "aggressive" (no one knows you're a dog on the internet) complaining not only about their gay ugly external texture but about the tendency in general across various suppressor companies to do these gay faggot external textures. I ended up getting into it with Slade about objectivism and ART and beauty (I shit you not) and Sean was like "IT IS A UNIT SYMBOL YOU WOULDN'T GET IT" but also maintained that the "design" is functional and is repeated on the interior of the can and all in all the whole setup like a lot of can designs reeks of "engineers" who haven't actually done any real engineering and "designers" who haven't even read any Ayn Rand and insecure millenials who didn't grow up with the internet (if at all) and who can't take being called out on their shit (an external texture that is fucking ugly and has no point to it). All of that combined with it not being really all that amazing...That being said I think their mount design absolutely is neato and could be made into something legit cool that for me would kick me off YHM Kurz Ti... but that is yet to happen.
>>65432006The battery one is too heavy, but the non battery one also has issues with the reticle being too bright or something like that?
>>65432022>reticle being too bright or something like that?In direct sunlight it can get blown out. Most people just put a strip of tape over the fiber optic and pull it back/push it forward as needed and as lighting conditions change.
>>65432033>blown out>strip of tapeYeah that's that massive drawback I was referencing that each Acog seemingly has.
>>65432045>massive drawbackI get what you're saying but it's really not an issue at all in practice. I've had the same piece of tape on mine for almost 2 years.
>>65432022>>65432033>>65432045>>65432055nta but the only thing keeping me from a TA01 is that it's a nearly 40 year old optic that still costs a grand, pushing 1600 if you want to pair it with an RMRAt 600-700 bucks it's a no-brainer but fucking come on
>>65432007I’ve been told at the east valley tactical suppressor event by an employee that a lot of the excessively ugly patterns some companies use on the exterior of their suppressor slightly increases surface area for cooling and structurally allows them to use thinner walls. How true this is and how significantly it effects cooling sounds negligible to me. For all the shit CAT gets I like how they’re one of the few companies maintaining a clean appearance in the 3d printed can era.
Anyone here ever fly with guns? Family out in NV invited me to come over and I want to bring a gun to mag dump shit out on BLM land because we don't get to do that anywhere on the east coast. I've seen videos online and TSA always seems squirrelly with guns.
>>65430230>CHS FTSNot him, but this looks lower than the ADM FTS, man I wish I knew about this before buying that.
>>65431988Thanks. Yeah, I really enjoy ACOGs but there is just never a perfect optic, everything will have a compromise at some point. For instance, the Elcan is heavier and more complex, but works way better with a thermal. TANSTAAFL
>yfw there are still SFP LPVOs priced over a grand lollmao even
>>65432022TA02 weighs less than an elcan
>>65431232>hi simps on line my simps and cuck in real life film me shooting guns in horrible shooting stances and I suck him off when he makes enough money not you
>>65432167sfp is better for lpvos anyway reticles at 1x look like complete ass on ffp
>>65432252It doesn't matter how they look as they're supposed to just be a dot.
I'm looking at affordable, used upper parts for a non-duty piece, but it will house a long, heavy barrel. Which one of these should I try to get?>BCM upper receiver and QRF quad rail $300>KAK quad rail $125>Griffin Low Pro rail $125>SLR Helix $160>BCM Upper receiver $120Maybe list, if I get the itchM203 Handguard but it will have to be butchered to workLSW Handguard
This optic looks like something out of Alien.
>>65432288Looks like Chinese slop
>>65432288>filenamethat's a Leupold bubba
Phase 1 completeRecoil lug is as square to the blank as my shitty speed square can measure
Look I just can't stand Max Chen anymore, the racist formerly known as Wuggy. I'm contacting the physics department.
>>65432252The whole point is they're supposed to be a basically a red dot at 1x then turn in to a proper reticle
>>65432309You're doing it backwards but it looks like you're having fun and I suck at it too so I won't try to yuck your yum. You are inspiring to finally finish my own stock projects tho
>>65432321why's it backwards? if I don't have the holes to localize the action and the bottom metal, I wouldn't be able to line it up exactly where I want. I also wouldn't have a consistent reference point to use inletting blue to accurately whittle down the high spots with chisels and such
>>65432334Like I said I'm not going to yuck your yum and I'm no expert so I'm going to let you learn the hard way, but yeah you probably wanna inlet it before you finish shaping the recoil lug. Lines > barrel channel > inletting > deck height > shaping > detailing. Is the usual order and glossing over the specific steps. There's a book calling Stockmaking that makes it stupid simple we basically followed in Stockmaking.
>>65432344Doesn't matter. Not as annoying as Max Chen (maximum Chinaman).
>>65432344I won't know unless I see his nips again
>>65432344too skinny
>>65432348He has been posting about taking Chinese mystery peptides for weight loss.
>>65432350And you believed him despite him being a compulsive liar because?
>>65432340No yum yucking taken anon, this is my first time doing it so I'm open to suggestions. I'm loosely following a youtube series from some guy 15 years ago because I couldn't find anyone else going through the full process with hand tools.The next step is going to be the lines though. I'm not entirely sure if I'll use something square to the board and outline the action or measure out from the centerline of those action holes and connect the dots but I'll figure something outOnce I do that I'll be waiting on the chisels I got off eBay, they're coming from Japan so it could be a few weeks. I'll use those to make a clean edge around the outline before I start chiseling and gouging.I'm planning on just free floating the barrel since it's thick as fuck and heavy enough to probably not need any extra stability. I do want to keep it a very loose free float though in case I decide to epoxy bed everything at some pointI'll see if I can find a copy or pdf of that book somewhere
>>65432295You are correct. I mistyped it.
>>65432355>becauseHe had a week long crashout?
who is the most hated on /k/
You're all going to be jealous of ash's massive knockers by next year.
>>65432438me
>>65431241It’s a chopped KAC broomhandle I got off of TacSwap
>>65432447Ash takes test I sent him vials.
>>65431848Tfw no m203
>>65432499testrogen you mean
what happened to the buyer guides
>>65432522Anon's guide for beginners, text and figures!https://rentry.org/sa6c4mVicious' TL;DR V3.1 with annotations by A2Grip:https://files.catbox.moe/91lvkc.jpg
>>65432373Not here he didn't
Scatzoo dog fucker carbon making up stuff.
>>65432536See (ongoing)>>65432542
>>65432547You call that a crash out? I'll crash out your face you little bitch.
>>65432547it's not a crashout if it's true
>>65432558Scatzoo dog fucker carbon is sensitive sense he started estrogen.
PLXC rdb or Razor? Let a nigga know.
>>65432558Doubt it>>65432562>if I make things up it's actually real>>65432565>mirror, mirrorThis is your brain on runescape grooming discord
>>65432565You should just beat his ass I mean seriously how much more of this disrespect can you take?
>>65432624>Plcx gets here WednesdayMild enthusiasm other than needing to mill stacked dot mount to fit>no dot at 0.5mil for 200yd hold>no zero stop/poor turret implementation>still need to size to fit tenebraex caps>need to order tritium capsule for levelHolding off on cerakoting the mount until I'm done milling the accessory ring to fit around the objective
>>65432624PLXC>Brighter>lighter>shorter>potentially cheaperThough I would give vortex credit for their insane customer service. Kind of makes me want the very expensive LPVO they unveiled recently.
>>65432630Go eat more slop with your porker gf. Its funny how you preach online how everyone should be healthy and shit then eat slop 5 times a week. You are a hypocrite.
>>65432655>uhoh he's deflecting againI had grilled chicken and rice yesterday, retard>fresh eggs and a smoothie for breakfast every dayKeep trooning out I'm sure it work out a second time
>>65432512focus on getting a suppressor first
>>65432666i have no idea whats going on in this thread i just seen this passing by the board and i just want it know, chickens are the shit man, fuckin free eggs every day. amazing
>>65432646y do the turrets matter. do u dial with an lpvo?
>>65432685Scatzoo carbon should do the same but his drug charges won't let him
How did I do on my Fallujah style AR? I'm a newgunz plus It's my first AR build and I liked the aesthetic
>>65432698the cloner subreddit awaits you
>>65432693You should get better turrets for the price, and yes, you'll probably want to dial to confirm BC. Bet you 2nd generation will have better turrets. At least it tracks cleanly (according to cdoes)>>65432691They are cheap entertainment for sure and the eggs are so much better>>65432696>[it was real in my mind.jpg]
>>65432698Pretty good I'd let you thank me for my service behind the outhouse.
Why do people like tucked suppressors? The only upside I can think of is that since the handguard covers it, you're less likely to burn yourself with the suppressor. Otherwise its just more weight. I guess you can also mount a light/laser further up?
>>65432720I've only seen this with tiny 300bo builds.
>>65432698LONG MAAAAAN
>>65432726and 22lr
>>65432698I don't really care for the riser or the rail, but if it works for you, it works.anyway, here's my A4 clone.
>>65432698You put that gay ass carry handle on there but couldn't get the handguard correct? Kill yourself faggot.
>>65432698So the ACOG depleted your cloon budget?
>>65429865Fireteam exists.
>>65432769What's wrong with the handguard?
>>65432790It's a low back pressure suppressor in name only you might as well not even buy something 3d printed at that point
>>65432793kys kys kys kys kys kys
>>65432793It looks like an airsoft rail he purchased on Amazon.
>>65432802>>65432808Fuck it, it works good enough
>>65432815stop calling it a clone
>>65432800I just don't think that's true, it's nowhere near any trad baffle can I've shot and I've shot a few. Barrel is a 13.9 G$, H2A5 buffer and Tubb (RIP) AR10 flat spring with the eBCG. It's gassed as well as any adjustable gas block gamer gun, recoil and gas is simply not there. And you know what you can't tune out? Downrange signature reduction. Personally I think people have to keep trying to find something wrong with it so Ridgeback's marketing checks clear.
>>65432834I tried it on an 11.5 bcm upper and it's legitimately the same level of gas as an rc2
Rhodie 6J bros it's almost time.
>>65432698Terrible rail, terrible riser.
>>65432844i thought inconel was goonuff doe?
>>65429594>>65431934Imagine being so poor you bought an atrius instead of ASD and had to mod it.Also imagine buying a non M16pocket lower and non M16 cut upper.ASD is 100% the way to go.My V1, which I later put on the milspec levers, then sold to my bud after recieving my V2.V1 has around 1.5K no issues, V2 has 800 no issues.Just threw in a H3 buffer Super 42 and called it a day on my roll your own.ADM uppers and lowers are a direct fit.
How fucked am I?i've ran 11500rds through it without issues since the first few hundred when i originally did some retarded gas and buffer choices.
>>65432873
>>65432897why would you be fucked?
>>65432897>I ran well over 10k rounds through this gun>how fucked am I?Nigga what? It's a proven gun, you don't have any egregious parts choices other than maybe the troy rail but that's nitpicking. It's fine anon.
>>65432897Originally started in 2016 and been swapping parts to add ability or improve things.Parts list so you can bully:Sure Fire RC2 Mini 5.56 canSocom Muzzle Brake (Pin and Welded)Bastard Flashlight with M600V Head, Arasaka Body DS07 tailcap and Arasaka Mlok mount.BE Meyers Mawl-C1Unity Tactical Micro Switch2014 Noveske Afghan BarrelAdams Arms P-series Adjustable Gas block and piston Rod.Troy Alpha RailBCM K grip thingy LMT BoltAdams Arms Nickel Boron Lightweight CarrierPOF Roller CamADM Upper RecieverRadian Charging HandleFCD Extended Forward assistGeissele Super Precision 34mm MountVortex 1-10X Razor HD Gen 3Trijicon RMRHD W/ Reptilia MountMagpul Pro MBUS sights (front reversed)ADM4 Lower ReceiverGeiselle SSA TrigerASDesigns V2 0-45-180 arcfire w/ blockerSparrow Extended mag releaseI DONT FUCKING REMEMBER ANTIROLL PINS DOES IT REALLY MATTER?Also don't remember the detents and springs. probably delton or some shitBCM gunfighter mod whatever gripFCD end plater w? FCD barrel nut for double staking because I suck at itCenturion 10 position Buffer TubeGeissele Super 42 H3 bufferMagpul ACS-L Stock (I like it, fight me bitch)Originally had a M600DF that I sold once I finaly got nightvision. Overspent on the MAWL because I tried others and hated how they were high and wasn't going to go non LVPO because I am genetically fucked up in the eyes.OH! Forgot that I did have some issues with my Original rail that led me to buy the Troy.Overgassing a rifle by accident on a modified barrel nut with a piston system can bend the rod. ASK ME HOW I KNOW. So my Midwest Battle Rail with it's barrelnut got swapped with the only NOT BBC SIZED rail with Mlok and a milspec barrelnut that I found that would clear the piston.I also ran the gasblock wide open and the extra support keeps the rod from jamming and bendingAlso overtorqued the screws and it's holding zero. Funny.
>>65432685Thats the plan, going to move in November and was waiting on that desu
>>65432931Going piston AND suppresor had my hands tied.Adams Arms which is the most reliable kit by simplicity needs a milspec barrel nut or milspec length barrel nut, or you can cut it down for clearance. It also needs enough space to clear the block. AND I wanted 7postion Mlok because I wasn't running nightvision yet so I had my OG weaponlight at the 2oclock to be best out of the way in both visibility AND resting against barriers.Had a Midwest industries one on there and swapping my can between guns I may have forgot to cut the gas. The cut nut only supported the bushing on one side so the rod jammed open and she became a single shot.It was either Adam Arms Chonky boy of a rail that they had at the time, or this.And this HASN'T show me any POI shift on my MAWL so I really can't justify shopping for a new rail.Especially since I live in foresty mountians of the sort where a 600y flat range to confirm zero out to is pretty much no existant and I actually have my rifle dialed out to that so I'm not taking anything fucking off that touches the barrel until it's worn out enough to throw a centurion one(Since anything post 2015 noveske sucks due to john's death and QC crash. Fuck Private Equity)Found a 2019 photo with some crayola's in markings because I wasn't sure if I'd like how it'd look.
>>6543289711000 rounds from a bench?
>>65432971Any experience with a complete Adams Arms upper? Thought about getting one of the 11.5 ones to use as a beater/loaner.
>>65432873>ASD is 100% the way to go.like I said, I've put thousands of rounds already though Atrius and its fine. Though I will replace it with the superior ASD sometime. I saw Atrius for sale for around $100USD at my LGS and bought it on a whim. When people dont shave the upper a little bit, you'll get snap city. ASD ones snap too with the same exact problems.>>65431821>is there anything to convert my current trigger to an FRT or do you need a full new trigger assemblyAtrius and ARC-Fire just change out your safety lever. You can keep your trigger usually- unless its some weird ass match-grade cartridge weird shit. But even at that, similar triggers could still be used like certain 3.5lb Mimtac or Rave140 triggers. With some tweaking you can also use the Geissele ones.
>>65433082>With some tweaking you can also use the Geissele onesYeah mine's an SSA-E
>>65433094>Yeah mine's an SSA-EIf you use the latest ARC-Fire brand FRT, it states it is compatible with those. For Atritus, you'd want to buy the version called "G-Lever" that has an extra rail extension to support those. Either works, I would lean towards ARC-Fire for drop-in no hassle.
>>65432292you rang?>>65432938I like your style. What stick you puffing on?
Are all captured trogger pins for cassette style triggers a standard diameter?
>>65432281https://bravocompanyusa.com/bcm-upper-receiver-m4-flat-top-m4-feedramps-complete-unassembled-demo-scratched/
>>65433186>troggerThank you based india
>>65433190hell yeah. Thanks, bro.
>>65433190I still have one of these laying around. I don't know what to build.
How are you faglords doing
>>65433292>Loose Machine Tolerances>Fagpul moéHello, Amelianon.
>>65433314>magpul(the preeminent AR furniture company for the last 20 years)>is actually B5...Anon
I'm sure you guys probably get a bunch of newbie questions but I'm kinda stuck between 2 options on my first ever rifle and would like your opinions.From my research it seems the BCM blem upper w/ BCG is the cheapest ticket to buy once cry once land but what are you guy's thoughts on buying thishttps://palmettostatearmory.com/psa-16-chf-mid-length-a2-5-56-nato-1-7-13-lightweight-hex-m-lok-upper-no-bcg-or-ch.html+https://www.wcarmory.com/microbest-bcg-556-chrome-c158-luxe-cr-ext.htmI save about $150 and I get a FN CHF barrel which is better than BCM Chrome lined or am I mistaken?Thanks for any spoonfeeding bros : )
>>65433314hello!
>>65433373>PSA shitbuy the fucking BCM anon, dont think the PSA is better because you put a nicer bolt in it
>>65432698big yikes
When you buy a gun online from like PSA do you do the 4473 in person at the ffl or online?
>>65433436at the FFL you send it to they have you fill it out when it arrives and once it goes through you get the item and pay transfer fee.
>>65433510You forgot about the penis inspection part.My FFL is required to inspect the penis as is state law.
>>65433510I feel like this could be easily abused so I don't believe you
>>65433539How could this be abused?
>>65433549It's summer.
>>65433436PSA transfers the firearm out of their "bound book" and into your FFL's. You then complete the 4473 with your FFL.
>>65433570I believe this, thanks for the good info
>>65433648me on the shirt with the butterfly top right
>>65433648Is this a current picture of that fat faggot?
>>65433328he’s talking about the grip you absolute imbecile
>>65433648christ i can smell this picture and I do not care for that
>>65433373all fn chf barrels are not the sameit is marketing - you do not know the specs that psa has contracted to them for bcm chf good to go
>>65432844It's shit, rhodie 6 mogs this piece of shit
>>65432720Only people with an intact foreskin would understand. Obviously doesn't apply to you
>>65434168It's literally just a rhodie 6k with a different exterior though?
>>65434190And the 6k is shit
>>65434197How so? Do you have experience with it or are you just regurgitating what you read online?
>>65429794I have a 10.5 specifically to spite you
>>65434206Are you retarded? It's shorter (barely), so it's not as quiet and is worse for flash suppression. You might as well just toss it away and use an a2 flash hider
I'm getting my suppressor soon. If it's shit, I'm going to tear this shithole a new asshole. You fags will never hear the end of it.
>>65434213Thanks for confirming you've never tried it.
>>65434225Lemme guess, you got scammed?
>>65434219What can?
>>65434228>>65434228huxwrx 556 titanium
>>65434239Anon...
>>65434239
Alright, I see how it is
>>65434239Zero people in this general would have recommended a titanium can, much less the hux flow in current year.
>>65434239oh no no no
What’s a good sling to grab for my a4? I have a surplus m16 sling new and sealed from 1986, but I can’t bring myself to open it. Idk should I open it anyway?
>>65434529>i need a sling>i have the perfect sling already in hand but i don't wanna use it because uhhhhhh
>>65434529Grab a cheap one idfk, wtf do you want us to tell you?
>>65434529I use a Specter Gear sling on mine. it's alright.
>>65434916I want you to tell me that everything is going to be okay. I want to feel held for once in my life. I want to put my head on your chest and hear your heartbeat while your breath tickles my ear.
>>65434934Shut up fag
>>65434934not only are things not going to be OK, they will be getting much worse as well.
>>65434954Good
>>65434931Nice, we have the same rifle and floors. lol>>65434678It’s sealed from 86. :(
RC4 fde for my 50 shades of babyshit block ii
>>65435003You can get another one for like $10. What the fuck is even the point in buying one if you aren't gonna use it. Slings aren't exactly huge ticket collector items
AR9-15 Hell yeah
Yo printscan kinda sucks Doesn't help that my hands immediately start squirting half a second after they've been dried or if air stops moving past themHopefully ATF doesn't hassle me about this shit, the government's got all my prints on file using way better tech
>>65435088it took the UPS printscan thing like 30 minutes for me because i have hyperhydrosis and the nice lady had to have me hand sanitize and dry with paper towels after every 2 attempts and it would still smudgethat shit sucked by it ended up working
>>65435095Yeah I'm p sure it works by passing a small current through the silver box around the touchpad that you have to rest your fingers on, and they measure the the current or voltage drop on the pad so any fucking minuscule amount of moisture and it basically shorts that whole part of your finger and it's all blackOr at least how I think it worksThe fancy ones with the clear glass window and green lights and mirrors and shit worked way better when I had to go through a Tier 5Hopefully the wait isn't long but it shouldn't be the months to a year that it used to be
>>65433100>250 for thatthis is like a 10 dollar part and im being generous>>65435069hell no
>>65435115U
I have a big chunky A2 and like every guy with a slampig, I dream of a petite spinner10.5 or 11.5 while keeping the A2 fixed stock?
>>65435088mine were absolutely fucked and they took them no problem. fingerprints are the only thing they seem to not be sticklers about
My eBay chisels haven't shipped yet so I'm taking my time trying to find a good way to make my outlines. I don't have a way to squarely trace the action so the only good lines (the width of the action and the tentative width of the stock) are the ones I measured from the holes I've drilled. Measuring the taper at the back of the action is going to suck ass so I figure if I just get a shallow recoil lug slot drilled out I can get a more accurate traceFun project though, the most wood working I've done is building my workshop table
>>65435003>It’s sealedGayest sentiment on the planet. Congrats on having a bag with a fucking $5 strap in it. Make sure to hang it in a shadow box, faggot.
>>65434937Mmm yeah like that what are you going to do to me if I don't?
ACOGbros, is the glass really that clear?Is it worth the grand that it still costs, or the ~1600 bucks with an RMR?It just looks so cool but I'm such a jew it's hard to justify basically the price of my rifle for a 4x and red dot
>>65435422>the price of my rifleyour rifle is shit so dont bother putting something good on it
>>65435422I got my acog and rmr used for 1000. At that price I'd say it's worth it>is the glass really that clearyes
>>65435433Over 1700 bucks back 5 years ago or so aint poverty spec, that's like 2200 today adjusted for inflation and that's without the suppressor >>65435440The combo for a grand?Fuck I need to keep searching around then, I though about pulling the trigger the other day for both for just under 1600 new Haven't had much luck finding anything used for much cheaper than new
My can finally shipped
>>65435422>glass really that clear?Yes>hard to justify basically the price of my rifleThe only thing on any rifle that actually matters is the barrel and the optic. You should always be dropping big money on glass.
>>65435451search tacswap there are a bunch, ebay too
>>65435422you dont need the rmr for starters unless you got nods
>>65435599True I use a $100 primary arms since I don't have nods.
>>65435603Tbh the primary arms is bretty gud for NODs too
>>65435115>this is like a 10 dollar part and im being generousya paying for the legal statute, not the part. I'll pay that just so I can enjoy my tools at an amazing cyclic firing rate without glowies knocking on my door.
Found a punch in my dad's old tools and actually staked my castle nut for the first time in 14 years
>>65435824
>>65435824>14 yearsYoure lucky to be alive.
Hell yeah bros this bitch ain't going nowhere
>>65435860Nice.
>>65435860where to cop QoS engraved CH?
>>65435880My wife got it for me.
but enough about BRN-4 users!
He could be reading your comments
>>65436130Why would he post that, it's a window into how assblasted he is
>>65436130Mother fuckin fuck, that fucker reading my fucking comments just fucking pisses me the fuck off. I can’t believe this fuckin shit.
