Hi, /k/I've been wanting a decent 7x57 sporter for a while, and a family member gave me a 1916 Spanish Mauser for free, but unfortunately the barrel is pretty much pitted out, and it has a rather large sight ramp that I have no need of.I've been looking at potentially getting either a custom or prefit 7x57 barrel for it, but my main question is if it's feasible for me to do the rebarreling myself. I have almost no gunsmithing experience, but I am familiar with mechanical things in general.I'm just not sure if this is a job that really should be done by a gunsmith, or if it's doable with a decent instruction set and someone who isn't totally retarded. I'm not certain about setting the headspace properly, and I'm not sure whether it wouldn't be beneficial to send it off to McGowen or a similar barrelmaker to have the action fit there.I'm looking to economize as much as possible, but if it's actually doable and roughly the same cost with buying the action wrench/gauges/etc to having it fit professionally, I'd prefer that so I have the ability to do it again in the future with other Mausers.
>>65635046A man's got to have more money than brains these days to sporterize a milsurp rifle, an incredibly uneconomical labor of love.If you do it, don't cheap out on anything, budget milsurp sporters are horror shows visually
>>65635050It is already sporterized, and beat to hell from 106 years of abuse. I like Mauser actions, and this particular 93 action happens to be the cheapest way to get a Mauser action in 7x57.
I don't think you can prefit mauser barrels. it's going to cost you $3-400 for a gunsmith plus a couple hundred for the barrel itself.
>>65635046It's entirely doable to rebarrel the rifle yourself. The actual process isn't that difficult as long as you have the right tools and have done a modicum of research, my dumb ass managed to rebarrel a 1917 Enfield in my bedroom. The biggest challenge honestly would be pulling the original barrel off. Old barrels on bolt actions can be on pretty tight, to the point a relief cut needs to be done in the shoulder of the barrel where it meets the receiver face in order to reduce friction. A tight enough barrel vise with steel contact surfaces can also work if you don't care about marring the old barrel's finish. The problem for you is that you're not really gonna be able to economize this process at all if you don't already have the tools. Ballparking these costs here, you'll need>$300+ new barrel>$100 barrel vise>$100 action wrench>$60-75 headspace gauges>$150 chamber reamer, handle, cutting oilYou could theoretically find used barrels on Ebay or elsewhere for a bit cheaper that are in 7x57, but the question is if it'll headspace to your bolt or not. If it doesn't you've wasted money.
>>65635201>You could theoretically find used barrels on Ebay or elsewhere for a bit cheaper that are in 7x57, but the question is if it'll headspace to your bolt or not. If it doesn't you've wasted money.Correction, if the headspace winds up being excessive, you've wasted money. Can't put material back into a chamber to reduce headspace
>>65635046The only "economical" way to do it would be to get lucky. Lurk gunbroker for either a barrel or a cheap donor gun (have fun with that; Spanish mausers are notorious for being beaten to shit) and then either have a gunsmith swap them or buy a barrel vice and do it yourself while praying; any small-ring mauser barrel in x57 should theoretically "drop-in" but there's a decent chance that it will need to either be adjusted (by a gunsmith) or will be incompatible.Also, Spanish Mausers are notorious for being poor choices for rechambering - small-ring designs are inherently weaker than large-rings, barrels and parts are less available and Spanish steel was inferior to basically every other steel in Europe. They have a tendency to develop nasty headspace issues when rebarreled to higher-pressure cartridges like 7.62 NATO or 8x57.
>>65635975Like I said in the original post, I'm keeping it in the original 7x57 and I don't intend to shoot pissin' hot reloads through it. I just want to replace the old barrel with something with a nicer contour/weight and rifling that isn't gone Based on the cost of tools and the possibility the barrel might not fit, I may just pay McGowen to do it since they offer action fitting at a reasonable price for Mausers
>>65636244why not just keep the rifle as-is (i've got an older rifle or two that i just keep around) and get something else, whether it be historical or modern?
>>65636244>I just want to replace the old barrel with something with a nicer contour/weight and rifling that isn't goneAnd the point of half of the people in the thread has been that you could get another Spanish mauser - or some other 7x57 sporter - with a crisp bore for less than it would cost to acquire and fit a new barrel and if you change the barrel profile you'll either need to re-stock it or live with it as an ugly duckling. If you re-stock it that then the rifle you have is functionally a donor action and you could probably pay for half of a better action by flogging it for a couple hundred bucks at a gun store.If you want to do it yourself as a project than that's one thing but it seems like you're on track to spend a not inconsiderable amount of buck for relatively little bang.
You would be far, far better off trying to find something like a Zastava M70 in 7mm Mauser. They made them up until 2020 or so and they aren't terribly expensive. Usually around 7-800 bucks. Winchester also made a Model 70 Featherweight in that chambering. They're wonderful little rifles but you'll probably pay double the price for one.
>>65636244>small-ring designs are inherently weaker than large-rings, barrels and parts are less available and Spanish steel was inferior to basically every other steel in Europe.He's correct in that other post, small ring Mausers are prone to stretching, Spanish ones doubly so because they used poor quality steel...it's how you see such good survival rates of Chilean 1895 Mausers compared to Spanish rifles in the same chambering.Honestly, I don't think there's an economical way to do what you're wanting to do. Still kinda hope you do it anyway because it'd be cool, but it will take awhile and it will be expensive
>>65636361He was incorrect in that he was replying with the idea I was rechambering it for a more modern, higher pressure cartridge.>>65636309Trying to find any modern rifle in 7x57 is very difficult, I've been watching online retail sites for a pretty long time for something like a Zastava M70 or Ruger M77. They simply don't come up often, and often command a premium over more common chamberings like 30-06.
>>65638470>He was incorrect in that he was replying with the idea I was rechambering it for a more modern, higher pressure cartridge.Even 7x57 beats up those Spanish receivers
>>65638522Maybe a little over time but that was the original chambering
>>65635201>$60-75 headspace gauges>$150 chamber reamer, handle, cutting oilAbout a third of that if he rents them from 4D and isn't too retarded to use them without fucking them up.