Yo yo mah niggahz what’s crackin?Purchased this a couple of years back and he fell off the shelf breaking off some of the tops of his wing bones,I feel like it should be relatively easy to sculpt but I’d appreciate any tips considering what to use and how to glue the parts on.Thanks in advance
>>11557790I don't know, green stuff? Epoxy putty?If you want to glue the broken parts try loctite or tamiya's plastic cement (green cap)
If you have the original broken pieces you can use a pin vise hand drill to make a hole on the piece and where it would join the wing, glue a piece of a pin or paperclip into the hole then glue the pieces together using the pin to reinforce the piece. If you're sculpting it, I still recommend using a pin vise drill to make a hole and put a paperclip into the wing to sculpt over as it will reinforce the sculpted part as well. Epoxy putty is a pretty easy material to use. Get it at a hardware store, it's usually a 1 to 1 mixture and it air dries sturdy.
>>11558109>>11558208The pieces were lost and thanks for the advice, I’ll get some epoxy putty and go from there.Luckily the parts are pretty easy to sculpt
