CRT thread? Just got an RCA off facebook for free. What do you guys play on? Find anything cool recently?
>>12118283bro
Ah meant to post this on /v/ how do you delete a thread??
Mods feel free to delete this post, I meant to start a post on te regular /v/ board. I tried selecting delete file and delete post but uts not eorking. not sure what I did wrong
I bought a Sony Wega Trinitron for $20 off a woman who did this. She was not a very good looking woman.
Where's the peanut butter?
nice cock bro
CRTbrothers...
>>12118283>reverse image search>no resultkek
It's over.
grim
>>12118283You have a nice cock for a midget.Are you single? ;)
>>12118283The poor pets :(
>>12118283goddamn canadians
This is the best CRT thread we've had in a long time.
>>12118560it's a repost. guy was not remotely ashamed eitherhttps://desuarchive.org/vr/thread/11317750/#q11323119
can any crt emudriver wizards diagnose this? I've tried composite sync and no composite sync. I've tried every combination of 1 and 0 in the polarity presets. I'm using 4 bnc cables that I know worked in the past but I haven't used the crt in a long time and I stupidly used the hdd for something else.my gpu doesn't support edid whatever that is
>>12121285forgot to mention it's a pvm and my gpu isn't new enough to support edid whatever that is
>>12121285If it just werked and now it doesn't something must have changed in your setup. I doubt it's because of lack of EDID my setup with emudriver lacks it as well. Just seems normal that your display lacks EDID if it's an old CRT and not VGA.If a cable or adapter has changed maybe the sync isn't wired correctly. It's supposed to be over the horizontal sync pin on the VGA side. I would test continuity between h-sync VGA pin and the sync BNC output end. Make sure the appropriate switches are pressed on the PVM to use c-sync. Some have the option between c-sync and separate horizontal/vertical syncs (RGBS vs RGBHV) and you might have it set to expect 2 sync lines.
>>12121285Looks like you're sending it a progressive signal when it has to be 480i.
>>12121402I remember there was some bullshit last time that took me a long time to figure out, really wish I didn't format that previous install. all the cables were left plugged in the same (RGBH) so I really don't think it has anything to do with that but yeah I guess I'll get a multimeter just to be sure if I can't get it working soon.wdym switches?>>12121408I used vmmaker so it should be set correctly but I just read something about making sure to run the driver install as admin which I didn't do so I'll try another fresh install
>>12118295FYI there is another very good CRT releated thread in the catalog here. Hello and welcome. Now enjoy Lords of Midnight amd galaxians.>>12111365
>>12121285Migyt already seem obvious but clean the connectors with a cotton bud and some isopropyl and ensure they they are a good fit, could just be a bad contact.
>>12121449>wdym switches?Your CRT itself might have a switch or button that you've pressed that puts it into a different sync mode instead of what you want to use.
>>12121449I think this guy had the same issue and figured it out in this thread https://forum.arcadecontrols.com/index.php?topic=165954.0Scroll down a few posts where he said he figured it out and try following it.
Man what an incredibly slow thread I wonder why that is
and I will go sailing no more
