Supposing, hypothetically, there was this safe that had long ago lost its key, what method would you use to open it?Violence is acceptable, but no explosives.
>>2822051Give it back, Tyrone.
>>2822053NO
>>2822051thats just a fire safe so it would be easy to open with an angle grinder or sawzall
>>2822068Dang, awesome.I have an angle grinder and a recip, so I'm covered as far as that goes.
>>2822051just hit it hard with a sledge hammer and it'll open up
you could dissolve the latch and hinges with some sort of acid
>>2822051Give it back Jamal.
>>2822070Diablo Auto Dismantling recip blades are love. Try some as it's a good excuse. I can take the nose off a Silverado with one blade including frame cuts (I harvest drivetrains).
>>2822128
>>2822051bet that lock is easy to pick.
Fill with water and freeze>>2822094I wonder what kind of acid
>>2822051You should do more fenny and then try to buy some shit with counterfeit bills
>>2822053>>2822104Cmon guys you can do better than that. At least go as far as Barkevius. Throw in an apostrophe or two while you're at it.
>>2822204Not a bad idea, but it has Pokémon carts in it
>>2822068this this save is just kuchenblech sold by the kuchenblechmaffia
>>2822074This was my plan at first. I just got worried I would warp the safe without actually opening it, and then other methods (like picking the lock) would become impossible.
>>2822051give it back jamal
>>2822051Flathead in keyway and vice grip to rotate the screwdriver and shear all the tumblers. May even be able to buy a new lock cylinder and reuse the safe. Messing around with angle grinders and sawzall is just creating unnecessary mess and asking to damage the contents.
i have a sentrysafe, not that model though. the grey plastic piece right about the keyhole is what's keeping it closed. i'm pretty sure it would pop right off with a crowbar.
>>2822204Acid is childishly stupid and the suggestion was obviously a troll.
>>2822051if this is the actual "safe" buy some lockpicks and just pick it.I just picked a similar lock in 5 sec with two bristle hairs from a street cleaning vehicle.
>>2822408Does it need to be a rather thin flathead head? I tried it and it didn't do anything.FWIW I know for a fact that the top 2/3rds of the safe's interior is filler material like bubble wrap, so a power tool probably wouldn't damage anything important.>>2822703Is it that easy? I can buy lockpicks for sure but I'm surprised any safe could be picked that quickly.Guess I want a gun safe if I actually wanted to protect anything legitimately valuable.
>>2822732>Is it that easy?Depends on the lock. Shitty locks like Anon posted can be picked with a hair pin. Barrel locks like in OP need special tools.
>>2822765a tension bar and a rattle pick should pop this one in minutes with very little skill.
>>2822766>a tension bar and a rattle pickaka special tools
>>2822732>Does it need to be a rather thin flathead head? I tried it and it didn't do anything.You hammer in a decently strong screwdriver, it will destroy the keyway. Then, you grab with vise grips and turn it open, hard. This breaks all the tumblers.
>>2822772basic stuff that can be bought online for under $10
>>2822775So we are in agreement.
>>2822776here is a guy doing it with a screwdriver and a paper cliphttps://youtu.be/dBEmyCobbE0?si=LORjkX-L4I6Ey6bj
>>2822780this one is kinda funnyhttps://youtu.be/81iHdJtZ2mA?si=0pqL2TyfQHZRydx4
>>2822051>Barrel lockdepending on the building of the safe it may be as easy as using a magnet or needing special toolscheck the lockpicking lawyer on yt, pretty sure the dude picked one like yours a year or so ago
>>2822051Have at it OP
>>2822492MURACIDTIC
>>2822780>>2822782We were talking about the barrel lock in OP.
>>2822732Most gun safes, while better, are still pretty vulnerable to attack from someone in the know. They have better designed locking systems but at the end of the day, they still don't have very thick metal.
>>2822792....please hang that from a tree, or throw it into a car, then turn it on from like 200'
>>2822051These safes are 90% foam. I'd just use a 4 inch hole saw.
>>2822765>>2822786>>2822836Are you blind or just retarded? That's just a basic bitch wafer lock.
I broke it open. All it took was this flathead and this mallet.
>>2824008Thanks for removing the head of the mallet, fucking image resizer.<Photo of the top of the box's contents, as yet undisturbed.
>>2823948It seems that I was blind, yes.
>>2824010Are those opoids?
>>2824090Just filler so the contents of the box won't rattle.Contains Pokémon related stuff.
>>2822051Chain drill with cobalt bits.
>>2822051with a shitty sub 200 dollar safe:1st step, angle grinder off the sheet metal on the exterior side wall2nd step, chisel off filler material or just break it into pieces with a hammer3rd step, dremel off the final sheet metal layer, alternatively it can be chiseled through like a tin can or sawed through if you are worried about stuff inside catching on firewith an very expensive safe vault filled with lead or thick steel i would start with oxyacetylene torch then try using either a chisel on fireproof material or an diamond angle grinder wheel. with the final layer of steel i would drill in with a tungsten drill bit then use a tungsten fox tail saw (HSS will do fine unless the vault is made out of hard tool steel)this is all in case where the safe doesn't have obvious security flaws like a shitty lock, parts that can be moved with a magnet or just be moved with a dead blow hammer. honestly just hit it with a hammer in a bunch of places while jiggling the key or move the magnet around it and you might get lucky
>>2822051Get your lockpick out and rake it open Jamal.
gallium