How to sand foam to make it look less icky?Can a 220 grit sanding disc with an angle grinder do the job?
>>2828449Cut it with a razor dumbass, do not sand it. Do not grind it either.
Wait for it to cure completely.Use a sharp knife to cut from two angles.(go around cutting down with blade against the wall, go around cutting horizontally with blade against the floor)Remove 'fillet' in single piece.
>>2828478what if I had a shroud and connection to a vacuum? >>2828479gotcha. what about using a sawzall
>>2828686oscillating tool is easiest way to cut that stuffuse the cheapest blade you can find, doesn't need to be sharp
>>2828689on it bruv
I get in situations like this sometimes. Use a box cutter to cut away the excess. Simple
>>2828689Cheap piece of shit kitchen knife from the dollar store is better. Cut through it like butter. If it dulls sharpen it up on a belt sander and continue on. Throw it away when you're done if you want.