here's your all-metal bullpup with a good trigger, bro
>>61594156it's an aluminum extrusion with a lower bolted on.
>>61594156Looks like dogshit compared to original
>>61594182>>61594156I really hate that they broke up the line of the receiver behind the mag well
>>61594175it uses ar takedown pins
>>61594175The scar is an extrusion also
>>61594275THATS TOTALLY DIFFERENT!!1!1!1
>>61594156the lower is polymer anon
hold up...
>>61594423So same as the SCAR?
>>61594156Looks a lot like the old Bushmaster M17.
I like my triad with a jakl in .300blk
>>61594743Sweet build anon, how (well) does the lower attach to the barrel shroud?
>>61594904A3 sells a specific lower handguard for JAKL uppers that has a build in piece for the front take-down pin.
>>61594743I'm sorry but this looks retarded
>>61594931Thanks anon, this is my dream build and I was looking at the Scy lower but this might do better.If I can continue to bother you with questions, have you weighed that gun? And did the 300 Blackout Jakl have a gas shutoff mode for ultimate quiet?
>>61594568it is except shittier looking and no carry handle
>>61594743Just got the kit this week. How does it handle suppression? Anything A3 recommends there?
>>61594156>Caribbean mulatto man and pot bellied Ivan did a Youtube on this>"If they were made today, there would be no reason these should cost more than ~$250">Go to K&M Arms to see their prices on new ones>MSRP: $2000Is this the power of talking out your anus?https://www.youtube.com/watch?v=mLL0WYN7R78
>>61595374K&M is literally one guy in a shack with no production lines. Every guy might as well be custom made
>>61595374No, its the power of a hypothetical where it remained in production and enjoyed the benefits of mass manufacturing and widespread adoption. Id say you have a reading comprehension issue, but you didn't even have to read. You just needed to listen.
I watched a video a while back, can't remember who, that said the aluminum receiver gets really hot after just like 1 mag.
>>61595007The Jakl has no off position. Weight wise is surprisingly heavy for what it is. its like 8-9lbs unloaded without the suppressor.>>61595329 I find that when shooting suppressed, It needs to be on fully open, and non-suppressed on the lowest option. Makes it easy to switch between them since its either fully clockwise or counter clockwise.>>61594946ok
>>61595466>>61595470Fair enough, even some single shot break action would be expensive if it was being made by one person.
>>61594428>$700 for just the lower shell alone
>>61595848>even some single shot break action would be expensive if it was being made by one personNo reason it needs to be that expensive even with a just a single person making them.
>>61596608it's under $600 on Brownells with coupon code
>>61595470I get the theoretical advantage of just shitting out guns in alloy extrusions but are there any other reason why we don't see more of them? You think the Chinese would have at least tried it besides the Belgians and down undies.
>>61596608So what nigga boo fucking hoo. Stripped radian and lmt lowers are about 300. The fm uppers are cheap as fuck and work well, it evens out for your special snowflake ass self
>>61594568Because it is, https://youtu.be/mLL0WYN7R78?t=745
>>61595466>literally one guyIt's a shame because I think he could use some extra help with marketing. I try to stop by his table to say hi whenever I see him at the gun show.
>>61594568>why does M17S look like M17?
Great need for AKB-23 whenever it actually comes out
>>61598679Go easy on the conspiracy theories, anon
>>61596608>doesn't need a bg check>compatible with existing NFA lowerIts the best option and its really good. I use it with 7.62 irl
is this the thread for TriCHADs?
>>61594743backwards 510c was a delightful touch
>>61601245I really want to build mine but it requires a lower with a trigger guard that can be removed and none of mined can except the one I don't want to remove it from. So I have to 3d print one.
>>61601815i just got a cheapo anderson lower. my first anderson I was really impressed with the quality of it after avoiding that brand for so long
>>61596771We do. Half of all modern assault rifles are made that way. SCAR, HK433, BREN, B&T APC, etc.
>>61594156My buddy has one in 308. I only shot a mag through it but it seemed pretty nice.
>>61594156>>61594428>>61594568>>61594743>>61598728>>61601245>>61602817Are theses FAMAS?
>>61602817Ever had a shell deflect back into the upper?
>>61602817what gelcups are those on 3M peltors?
>>61602827FAMAE
>>61594175So's your mom, still managed to pop you out.
I have one of thesethe upper is cavernous.I've had shells get stuck in there 4 real
>>61594423It isn't, I owned one
>>61594423retard
>>61594156it breaks a lot
>tape, straps, cords, and wrapsSo tactical I'm gonna tacti-cum!
>>61594568Leave it to the Australians to make a gun out of a fucking gutter
>>61594175>You now notice it's literally the same extrusion that holds the rail your blinds run on
>>61611562
>>61611451you can get like 30 feet of aluminum square tube for like $7 AND the extrusion process work hardens it and allogns the grain, so it's as strong as a forging for chump change.plus it requires no surface machining. it's a really good option.