ITT: cursed firearms and weapon perversions. Bubba's special cross-breeds, failed prototypes, the fruit of twisted incestuous relationships, and other abominations against God.
>>61947935
>>61948017Those are some of the strangest proofs I have ever seen. 12ga but the choke is .626? That's a super tight choke for 16ga, getting damn near 20ga. And then it says 12/20? Is this some kind of necked-down shotgun?
>>61948386The fuck is that, blunderbus drilling?
>>61948553It has two barrels so it can't be a Drilling. "Drilling" comes from the number three in german. Eins, Zwei, Drei. Drei-Ling = three-barrels. But yeah, it's a combination rifle and blunderbuss. Combination guns were pretty common historically but it was always various combinations of shotgun and rifle barrels. This is the first I've seen that had a blunderbuss barrel.
>>61948361>Is this some kind of necked-down shotgun?The "Vena Contracta" Shotgun. You know how people always dreamed about a gun that "carried like a 20ga but shot like a 12ga"? The madlads of the 19th century tried to do literally that: make tapered barrels that accepted a 12ga shell but had 20ga muzzles.
>>61947935There are plenty of custom shops that offer to fit a python barrel to a ruger or smith.
>>61949000So why are you whining instead of posting pictures of them? Why are you hoarding all the best interracial porn to yourself?
>>61949169Because they're easy to find. Bowen, who are among the best in the biz, have been doing python/anaconda barrel conversions forever.The also do custom S&W styled barrels from scratch too.
>>61949201>Because they're easy to findIt's a firearm perversion thread, the rarity of the gun doesn't matter.
apparently they produced the 1906 colt vest pocket with a 6 inch barrel for a specific european market so it could be legally carried. i only know the guns physically existed as factory guns and have no source behind that claim so take it at face value.its probably the longest 25 acp barrel ever produced and at the point where the bullet might even be losing velocity due to how fast burning the powder is. the barrels are easily removable but the novelty doesn't seem to be valuable beyond the factory condition of the gun because its just downright a shitty modification so its just a bizarre curiosity
you can suppress a revolver. lol
>>61949305that's pretty cool anon, I hadn't heard about those before.
>>61947935they said it couldnt be done.
>>61947935Is it wrong that I not only don't hate it, but sort of like it? Not sure how the finish would look IRL, but I kind of dig it.
>>61949305nice findalsohttp://ballisticsbytheinch.com/25auto.html6 inches is fine, at least for modern loads.
>>61949542It's just a SCA- oh
>>61947935>Smolt>bubba specialYou're a clueless fucking retard. Shut the fuck up and lurk, faggot.
>>61950520
>>61948386Duckbill choke meant to get a wider more horizontal pattern in shotguns.Some SEALs in Nam would use these on shotguns, allegedly.
>>61950527thatisthejoke.jpgAnon, I didn't think it was possible for me to lay on the sarcasm any heavier. Just how bad is your autism?
>>61950538Nevermind, I just realized the whole damn barrel looks like that.
>>61950538Gee, you think? Are you the same retard as >>61950527? If so, you need to stop posting unless it's to share some good pics in the thread.
>>61950551I’m not the same anon; go take your meds, this sort of anger and obsession is not good for you.
>>61949169>>61949625BasedHere's my customized model 10, although it's not really perverted, just done up by one of the greatest Smiths of the time. The action is insanely smooth and it's such a pleasure to shoot
>>61950520>>61950534
>>61948881What happens when you feed it spicy slugs?
>>61950571that's a tier 1 boomerwaffen sidearm
>>61948386The Pogginator 9000
>>61948386Unreal Tournament shock rifle - combination gun version
>>61949555To be fair the hard part isn’t putting the silencer on… it’s figuring out how to load the largest copper bullet you can find to keep the velocity subsonic while still making enough gas pressure to reliably cycle…
>>61950821You get to experience large black men in white hospital suits holding you down on a gurney while a nurse named "Bess" uses a pair of kelley forceps to pull pieces of the barrel out of your face.
>>61948779I kinda want it
>>61950571I bet that doubles the weight of the revolver.
>>61949331There's a guy on YT who made a clamp clamshell to allow use with a silencer and the ATF got mad at him and told him it was a silencer part and now I'm mad.
>>61947935is this cursed enough?
>>61947935Because of import laws, Taurus has to cut down their snubbies in the US rather than directly import them with the desired barrel length. This one skipped that step. Oops.
>>61947935the design of this bullpup stock is already ugly, then they went and threw the ugliest color combo they could get with the plastic pellets they had.
>>61947935Yes, that is a brake combined with a front sight post.
>>61947935no explanation needed
>>61947935I found this in /msg/ and I love it.
>>61947935Okay I think that's most of them I can find. Have a Marlin 336 that's had a red dot on it since the 1970s. Guess the tactical lever action thing isn't really that new after all.
No it's not a Nagant, no I don't know why someone would thread and put a silencer on a Dan Wesson.
be vewy quiet
I'm hunting duckshttps://www.metrogun.com/
>>61952481do i even want to know what this fires?
>>61952548I think it's still in its original chambering. It is (was) a Swiss straight pull. I'd have to check archives.Pictured: Gaunt's .44 Mag AK. https://www.youtube.com/watch?v=VN_ms5-UkOQ
Early Ruger Standard prototype. Ruger really liked the Nambu and Luger and was heavily inspired by them.
>>61952447BRetta hue hue hue
Now you'll never be able to unsee it.https://tincanbandit.blogspot.com/2019/10/featured-gun-ruger-22-pistol.html
closer to final design
Before becoming a gun company he also sold a hand drill in the 1940s that suspiciously looks like a Ruger Standard.
>>61952616Why were they so in love with that grip angle? It makes the magazines work like poop
>>61952624I really like the grip angle. I just wish my Aguila 40gr didn't like sticking against the front of the mag so much. Wee1 Tactical JR-15 now rebranded under GOAT Guns brand after some news sites stirred some shit about its edgy branding. I'm happy it's being made but I'll be honest and say it's neat...but kinda pointless for me. I'd be best off with a dedicated 22 upper to swap out while hunting. IIRC 10/15rd mags available soon.
I'm sorry I forgot what thread I was in for a minute lol. The JR-15 is a scaled down AR in .22. I kinda want it for some reason. Pictured is a copy of Ruger's 10/22 magazine made by Daisy for use in one of their rifles from the 80s/90s.
Pardini TR-20 looking like it came straight out of a political antigun comic.
>>61952695>straight out of a political antigun comic.It even looks like it has a 100 round extended clipazine with how far it sticks out
>>61952605BRBR GIBE LASAGNA AEHOOOOOOOOO
>>61952737Does it even have a piston rod at this point or is it a true direct impingement?
>>61952710I even made this pic back in 2023. I don't even remember having made it.
A (formerly?) Cali legal Glock. IIRC it was to allow building of a polymer-80 or importation of an off-roster Glock model (?).
the ruger p94s with the built in laser look like a fake gun a child would draw
>>61952775Oops. Glock is bolt action. Pictured, a totally regular M1 carbine...
>>61952783Can't tell if really slick and nice looking or like a Beretta that got stung by a bee. Maybe a mix.>>61952784MADE IN CHINA
Anyways I think I'm just about out. 50 state legal non-NFA silenced muzzleloader. Cursed? Hard to say.
>>61952791ruger p series are just nice looking guns in generalfreakshow ruger p series is the p89x special edition that came with a .30 luger barrel and recoil spring. why?
>>61949305https://unblinkingeye.com/Guns/LBAutos/lbautos.htmlwell here's a steyr 1908 with a 6 inch barrelapparently austrian-hungarian law banned weapons shorter than 7 inches
>>61952647>Does it take Glock mags? Don’t tell me.
the korth sky marshall. it's a 9mm luger revolver that doesn't take moon clips, but it has a rail on the side, and an even more bizarre rail behind the cylinder. the cylinder rail is for a proprietary laser attachment they sold alongside the gun that points in line with the bore. it retailed starting at $1000what confounds me about the design is the rails. i get the laser sight in line with the bore... but if you put anything on the other rail it's going to block the laser. so why not just make the rail in line with the barrel?
>>61952954
Filename says it's a Vector prototype. Can't see shit in thumbnail preview.
>>61947935>enters your thread>BLASTS you 6 times with .357 out of a 2" barrel>refuses to reload>BLASTS you 2 more times>leavesNGL I'm buying one of these and EDCing it... one day...
>>61953718also>called SW 327>doesn't shoot .327
>>61950802Ahh a fine way to execute your horse.
>>61952471Show us the rifle.
>>61953780I'm gonna be honest anon, IDK where the fuck I even got that pic. It has a 4chan filename in my folder though.
>>61952475I require an explanation. Proto m79 rifle grenade-dedicated garand?
>>61953942No further info in filename; you're going to have to search prototypes or file hash on desuarchive, sorry anon.
>>61952471It's not "combined", it looks like they cut out the front fsb ring to make enough clearance to thread on the brake. Still very goofy
>Be madlad duck hunter on the West Coast of the US>Can't use punt guns because the sea conditions are too rough>Get a crazy ass idea>What if I get a huge ass shotgun>And then like add a second set of barrels on top>And cut it really short so I can hide behind a cow and sneak up on ducks
>>61954604
>>61954613
>>61949000>complaining about an excuse to post Smythons and Cougars
Some guy's FAL with a twist
>>61955019Why would you do that?
>>61950987well that's the next step. luckily the desert eagle has a pretty high twist rate for .429/.43 bullets, so I'm starting with 300grs and Accurate No. 2 for the powder. The gas port is right at the throat, so if I hit peak pressure fast it should unlock, then maybe the back pressure from the can will blow the gun open.
Does the Mach Industries hydrogen gun drone count? It's not technically been built yet, but it's almost killed the 20 year old designer several times and wasted billions.
>>61950538>maybe true
>>61952481>pump-action K31?I need that.
>>61955019>mfw commie FALThat reminds me of the Norinco M14 chambered in x39. It also took AK mags.
>norinco hunterweird trigger geometry + 2 hands required to swap mags
>>61952518It's really easy to adjust the cylinder gap on a Dan Wesson, so it seems like a good choice for experimenting with suppressors on a revolver.
>>61953718>Modern smithDisgusting
>>61956266I have seen one of those at the Norinco booth at a trade show in ChinaMight even have an OC pic but can't be fucked to dig it up right now
>>61955551>There is now an I in FAL
>>61957186>the EFFIN' FAILt. misses playing MW2
This thread made me remember it but does anyone have the old /k/ meme image of the manga gun? The one that had a modified chamber so it turned into an automatic.
>>61953942I think it's an experiment to reduce recoil. The recoil goes in a straight line from the chamber to the shoulder, thus reducing muzzle climb.
>>61955019Jewish FAL with a twist
>>61947935This is the gun to represent 357 because of how pointless it is in the face of modern options
>>61955551Look at the camo, Finns are obsessed with 7.62x39
>>61957524Is that fucking Uzi grip for a mag well?
>>61955019It's not unheard of. South Africa made a few but there's not much info out there about them.
>>61952471>>61954603>hey I've got a cool idea...>shit i need to drill out both rings >shit now the rear ring is too big for the barrel>hey I'll just tap two set screws in
>>61955019Here's one in 7.92x33mm
>>61953723>>61953718>S&W Model 327I have one. I remember asking /k if I should go with stainless steel or Scandium before I plunked money down for one last year.
>>61953718Scandium guns are for collectors and retards. After reading that I'm guessing retard.
>>61952801>silenced black powder gunLong reload time due to having to clean the silencer after every shot...
>>61953244It's the the inbred embryonic offspring of the weird P90 prototype.
>>61957580Yeah.
>>61949555They never said it couldn't be done. It's just profoundly stupid.
>>61949555Did you have to cut down a 10" barrel or is that some kind of adaptor welded to the barrel?
>>61947935I haven't done it yet. But it's the same vein. I want an ar-10 and 15 but with steel instead of aluminum on everything. Autism, yes. But a neat novelty to show normies the difference in weight aluminum makes.
>>61951357Not quite, but the weight addition is intentional. It's a ye olde gamer gun, built for PPC ("practical" pistol course) back when that was a common competition format. They will blaze out .38 wadcutters very fast and very accurately, which is essentially what they were built for.
>>61958739Don't forget steel mags. IIRC you can get them from: Spanish surplus (cheap, shitty follower), British surplus (rare in US), H&K ($$$), Duramag (410 stainless).
What about guns with extreme wear? The Philippines comes to mind with M16s.
>>61947935new lowers too. not 100% sure if this is an original or a repro on an 80% given it being photographed on grass.
>sees weird resolution issues and scratched s/nI assume original but never say never. Here's another. Apologies for the garbage angles the photos were taken at but it's all that's available.
Horrible resolution then exported in such a way that absolutely fucked everything up, probably in a resolution that doesn't divide nicely, also in shit quality, but that's all I can get so here's as good a screenshot as you can get from the video: https://www.youtube.com/watch?v=T-7LGXBR_aI
What about failed/rejected prototype magazines? Yeah lemme just make disposable 20rd magazines. IIRC the 20rd aluminum mags were supposed to be pretty much disposable too but they were used again and again and again. Imagine now giving them shittier plastic mags.
>>61948017is it a light bulb or chinese takeout?
>lets just make a pump action .22 out of sheetmetal to make it cheaper>and make the receiver far too long...>and lets make the barrel out of brass.
>>61958716most people cut down a 10".I don't hate guns, so this is a welded adapter. I'm going to cook up some subsonic 44mag tomorrow to try in it.
>>61965563A...1917 with Garand stock and magwell? Was this a crackhead gunsmith abomination or some kind of Springfield arsenal experiment gone wrong?
>>61966226AND a M1903A3 rear sight? What the absolute living fuck?
The Dryse needlefire rifle is very well known to history. But did you know there were revolvers as well?
>>61949625i have been looking this exact picture since somebody posted it in 2019 and i forgot to save it
>>61958398Pretty sure this guy swiped this from the Fallout TV show set
>>61968557>>61958398https://youtu.be/gsGtZxSUEJw
>>61965563>>61966226>>61966232Korean prototype that takes Garand en bloc clips iirc
>>61948386Awooooooogah
ZENK
>>61952601>Just prior to their partnership, Bill Ruger had successfully duplicated two Japanese "baby" Nambu pistols in his garage, from a captured Nambu that he acquired from a returning Marine, at the close of World War II. First time I hear a non-weeaboo liking those fucking things.
>>61970958And yet, it resulted in a 22 with the looks of a Nambu and the grip angle of a Luger and somehow it's good. So good it's been made since 1949 lol.
>>61962207Name?
>>61971297CJ Hamilton Model 39. 22 short only. 1922-1930. Saw one for the first time for ~$500 recently but that seems like a pretty high price for one. Wait for an in person gun auction and it seems you can pick one up for like $100-200 if not less but they're somewhat rare. Being made so poorly (*according to forum posts) they're uncommon and few give a shit out of a vintage gun bordering on disposable in quality that you might actually shoot the barrel out on lol. I'd pick one up if it were like $50 but it's pretty much a wallhanger you'll shoot very rarely. Maybe you can shoot CBs out of it or something but man cleaning and taking care of a brass barrel sounds like hell either way. I didn't get to look in the barrel to confirm the one I saw was brass though; I just took a pic of the tag and gun (not the pic from above) because it was weird and I didn't put much more thought into looking at it after.
>>61970913i want this gun so fucking bad
>>61971442I really wonder if it was meant to go anywhere.
>>61971442There used to be a 3D viewer on the site that had the gun with mostly modeled guts too. I wonder if anyone ever ripped the files.
>>61971442It had weird additions like bit holders (?) or allen key holders too in the grip. Just odd if the design was nothing more than a guy trying to get some attention towards his design/modeling skills. Maybe he was hoping someone would buy the design, IDK.
What about freak silencer designs? An anon said he owned one in a recent thread and I couldn't believe the design of this thing. The "little bird". Baffles act like taps and scrape out the fouling when removed...supposedly.
>>61971449I doubt it, the idea is cool but anyone with an engineering background could instantly see that a) the design would be a production nightmareb) its clearly not functional in the form that they showed
>>61972743>...supposedlyright. maybe if it were a center-fire suppressor, but for 22lr there is so much shit deposited I have my doubts. clearing the threads any other way will also be practically impossible without ruining them further up the can. I went with a Sparrow so I could dip it.
>>61972817there are these product concepts that used to be extremely prevalent on the internet where someone would just design things with zero consideration put into how it would be manufactured and just hope that its "good enough" that someone swoops in and buys the design off of them to "make it work" or that they can generate enough buzz to get a company to greedily front the cost of those thingsi remember seeing this shotgun pistol before i knew anything about guns. i thought it would be something i could buy eventually. i didn't know shit from shinola - but that was what the people who designed this picture were trying to doi think that was how things worked for the baby boomers in the 70s and 80s so they told their kids that was how shit worked, but it stopped being a thing well before gen x became adults. what im talking about is basically what happened to the Pancor Jackhammer. it obviously doesn't work, and won't work - so why go through all of this effort trying to convince people that it's a functional gun ready to be manufactured when the prototypes have glaring flaws that my layman ass can see?
>>61973086>but that was what the people who designed this picture were trying to doReally? I thought it was just random art, perhaps from a video game. The shells don't even look like real shotgun shells. What was the backstory implying it was a real gun?>i think that was how things worked for the baby boomers in the 70s and 80sPeople have always been drawing pictures of nonsense guns long before then, like the classic "ray guns" from comic books in the 1950's. That's what I consider this like--fantasy guns that were never really meant to be real--except it was drawn with CG instead of a pen and ink. he Jackhammer is pretty different--that was indeed a real gun that was intended to be produced and sold. Yeah the project failed and the only surviving example is non-functional, but they at least tried to make a working gun and the first two prototypes did work, they just failed during testing, which is the point of building prototypes. The Pancor failed because of business reasons and politics (1986 closing of the machine gun registry).
>>61973643https://moth3r.com/project/dx-12-shotgunhttps://nationalinterest.org/blog/reboot/here-why-you-shouldnt-get-hand-held-dx-12-punisher-shotgun-186667Looks like it did come from a design company hoping to sell off the concept to a gun manufacturer, putting the cart before the horse it seems
>>61973733Thanks for sharing that, I never knew that the retards who drew it were actually stupid enough to think that design was viable.
>>61952710And the shoulder thing that goes up
>>61973086>there are these product concepts that used to be extremely prevalent on the internet where someone would just design things with zero consideration put into how it would be manufactured and just hope that its "good enough" that someone swoops in and buys the design off of them to "make it work" or that they can generate enough buzz to get a company to greedily front the cost of those thingsGuess that would explain all those Dahir Insaat fever dream contraptions.
>>61952624I'm pretty sure Ruger just thought the Nambu looked cool.
>>61975208Kurdish Gun design
>>61956196Looks like a Krag Jorgenson, not K31
>>61975666Satan, either put on your glasses or look at some guns. That has a K11 release lever and mag. You DO know the Krag has a mag on the side right?
>>61956031H110 is probably your friend then.. I shoot it out of my snub nose Alaskan in 454 and it builds pressure stupid fast it’s incredibly loud out of a snub nose barrel
>>61977955H110 is a slow powder for all magnum pistol cartridges excepting the S&W Magnums. Anon's challenge was to maintain high pressure to cycle the gun, but also be subsonic.Any use of H110 would send the bullet too fast to remain subsonic. His idea of AA2 or similar very fast powder is the best bet. High pressure, low velocity.
LM4Manual slide DAO pocket .45
>>61947935Crap sorry I'm late
>>61952624Hold one. It feels really, really good in the hand. It looks cool. That's literally it.
>>61978020funky
>>61952695Armscor M1600
>>61952695Is that one of their .22 pistols in a rifle costume like the Walther GSP?
Saw this at a gun show, it's mislabeled lol. It's by "stinger manufacturing" and it's called the Liberator.
>>61981698No clue. That's a wild looking rifle though. I really like the single slot pic cuts in that. I've seen just a few other guns with rails cut like that, often pistols, and it always looks neat. I think I've seen some revolver barrels with cuts like that for pistol scopes. Wish it were more common.
>>61981793What a disgusting uncomfortable crude little goblin of a pistolI love it>>61982709I didn't notice that--that may be unique to that one because they're supposed to be kits that you install a GSP receiver into and GSPs don't have those cuts in pistol form
>>61948386Doom shotgun spread