[a / b / c / d / e / f / g / gif / h / hr / k / m / o / p / r / s / t / u / v / vg / vm / vmg / vr / vrpg / vst / w / wg] [i / ic] [r9k / s4s / vip / qa] [cm / hm / lgbt / y] [3 / aco / adv / an / bant / biz / cgl / ck / co / diy / fa / fit / gd / hc / his / int / jp / lit / mlp / mu / n / news / out / po / pol / pw / qst / sci / soc / sp / tg / toy / trv / tv / vp / vt / wsg / wsr / x / xs] [Settings] [Search] [Mobile] [Home]
Board
Settings Mobile Home
/k/ - Weapons


Thread archived.
You cannot reply anymore.


[Advertise on 4chan]


/arg/ retard containment edition

Old tard thread
>>62750357
>>
>>62753151
There is absolutely nothing wrong with Palmetto State Armory.
>>
File: IMG_3793.jpg (407 KB, 2100x1574)
407 KB
407 KB JPG
>>62753156
i can name about 3 things off the top of my head
>do it
no
>>
>>62753162
Fucking do it. It's all anecdotal.
>>
File: lmt5.jpg (948 KB, 1000x1209)
948 KB
948 KB JPG
>>
Have any anons ever had a flatwire spring cause failure to feeds? Rifle build routinely gets stuck picking up steel case, even on bolt release. I'm wondering if the "more linear" spring has less force fully compressed and thus can't overcome the increased friction of the cartridges.
>>
>>62753165
Here are three points that some critics might raise about Palmetto State Armory:

Quality Control Issues: Some customers have reported inconsistencies in product quality, particularly with firearms and accessories. This can lead to concerns about reliability and safety.

Customer Service Concerns: There are frequent complaints regarding customer service responsiveness and support. Delays in communication and difficulty resolving issues can frustrate buyers.

Business Practices: Critics have pointed to aggressive marketing strategies and limited transparency around product sourcing and manufacturing processes, raising ethical concerns for some consumers.
>>
>>62753175
Bitch ass ChatGPT
>>
>>62753174
Did it only start when switching to a flat spring?
Barrel length?
Gas length?
Buffer weight?
>>
>>62753178
18", rifle length gas, rifle buffer.

I don't think it's a gas or weight issue. I can't even get it to go into battery when charging all the way back and letting it rip on a full mag. It will just keep doing that until about half capacity. It will lock back on empty though so that's good.
>>
>>62753156
>unfinished chambers
>gaped gas ports
>nitrided parts have bad heat treatment and fail rapidly
>low quality rails
>>
>>62753214
>parroting.
>none of this happened to me
>this has happened to literally everyone else but me, apparently im just lucky
>>
File: palmetto.jpg (51 KB, 600x315)
51 KB
51 KB JPG
>>62753217
>>
>>62753217
>fag
>youre a fag
>fuck you queer
>everyone is based but you
>>
>>62753228
Ironically, all the sticks in that pic look the same and do the same thing.
>>
>>62753232
The one on the right can cook three marshmallows at the same time. Your psa can’t do that.
>>
>>62753238
Name 1 gun that can cook 3 marshmallows at the same exact time
>>
>>62753241
Mine when I put three picatinny bayonets on it.
>>
File: mine.jpg (656 KB, 1576x2100)
656 KB
656 KB JPG
>>62753250
You don't own 3 bayonets.
>>
>>62753241
>not having a 3 prong flash hider
birdcage fags on suicide watch
>>
>>62753256
You know I’m just shitposting right?
>>
>>62753284
Yes. I'm kinda smart.
>>
>>62753162
I can name three things off the top of my head. Hair, skin, and my pillow.
>>
File: IMG_5136.jpg (1.82 MB, 4032x3024)
1.82 MB
1.82 MB JPG
>>62753448
uh oh
>>
File: IMG_20241022_161124.jpg (345 KB, 1080x1920)
345 KB
345 KB JPG
torched a psa barrel nut to get the barrel off, still didnt work. >200 ft/lbs, likely rockset. also broke a taper pin in half punching it out they were in so tight lol. in the trash it goes, just wanted to keep the stripped upper.
>>
>>62753503
>rocksett
you underestimate the power of Dayquandrius Tyreese Biggums
>>
>>62753514
haha ohhh i know, that too
>>
>>62753514
>>
File: kvndWku.png (1.38 MB, 986x973)
1.38 MB
1.38 MB PNG
>>62753162
Based fishy being vaxxed
>>
File: A2 clone w Chink optic.jpg (242 KB, 2979x1323)
242 KB
242 KB JPG
Building an SP1 clone for my next build, debating between a 604 upper from either H&R (inb4 >PSA) OR from TNTE. The price difference is only around $100, so the only thing swaying my opinion is that I have to get the lower from PSA regardless.nkh
>>
>>62753151
Hey that looks like my part of the country. Gutentag, cunts.

If you roll through my locale you'll probably catch rounds.
>>
>>62753514
Pretty sure a white guy made my PSA because it's perfect. You probably manifested a nigger cuz you're obsessed.
>>
>>62753649
H&Rs aren't 100% clone correct. They use nitride ejection port rods and springs.
>>
File: Notes_241022_185538_6e8.png (3.62 MB, 1341x1600)
3.62 MB
3.62 MB PNG
Gun go
>PEW PEW PEW
>DONG
>>
File: 20241022_161942_1.webm (3.72 MB, 1080x1920)
3.72 MB
3.72 MB WEBM
>>62753867
>>
File: Trace.webm (292 KB, 616x762)
292 KB
292 KB WEBM
>>62753867
Hell yah
>>
>>62753937
Fuck yeah, how far? What gun?
>>
>>62753855
A fair point, though I'm willing to accept a minor detail like that if it means the bigger picture is correct. At the least, it'll suffice until I find a more correct option.
>>
File: 20241007_091844.jpg (3.44 MB, 3586x1978)
3.44 MB
3.44 MB JPG
good morning, gentlemen
>>
>>62753867
Is there a calculator or app you use to do this? I highly doubt you're the main character who did all the math by yourself and did all that by yourself, but how did you? So I can do the same.
>>
>>62754143
nta, but range buddy is easy and free
>>
>>62754144
Ty
>>
File: 20241021_195426.jpg (501 KB, 1602x1018)
501 KB
501 KB JPG
>>62754138
Morning, Super Duty bro
>>
>>62754143
I mean, 1.047" per 100yds isn't exactly hard math. but I use RangeBuddy Pro. it's a really good tool, I just wish it did aggregate/overlayed groups.
I suggest having something with a 2" measurement on it to hold up to targets, that seems to be the most accurate calibration size for me.
>>
File: Photoroom-20241021_175543.png (194 KB, 1080x1080)
194 KB
194 KB PNG
Super duty more like pooper dookie.
>>
>>62754236
Ash are you a femboy?
>>
>>62754240
No according to fishy KCanon is.
>>
>>62754244
When I first joined /arg/ few months ago, I saved a picture of Kcanon I think. It was a picture of his/her feminine chest with a ar-15 on the floor and her bare feet with painted toenails. Can I post it? And where did she go? Why arent there any femboy shooters here posting thighs with guns?
>>
>>62754249
I don't think that's KCanon.
>>
>>62754249
That's Vic, not KC. KC is built like a man
>>
>>62754256
Ima post it hold on
>>
>>62754258
>>62754256
Woah we both go zero seconds spoopy
>>
File: 1722744856539502.png (1.7 MB, 3094x2461)
1.7 MB
1.7 MB PNG
>>62754256
Here it is. Who is this and where is she and can I fugg?
>>
>>62754278
That's Vicious, he isnt like that anymore. He is now a gym bro.
>>
>>62754292
Damn, he was just testin the waters by getting all girly and sexy?
>>
>>62754296
This is a Christian AR thread please stop being a fag.
>>
>>62754303
Am I fag for liking feminine traits in a man?
>>
>>62753151
Beautiful
>>
>>62754278
>Thinking I would have a Unity riser
>>
>>62754310
>am I a fag
Yes
>for liking feminine traits in a man
No
>>
>>62754318
Is that you Vic? You look great. Or is it KCanon? You look great KC. I can take you far away from here.
>>
>>62754330
It's KCanon you should take him away from here.
>>
>>62753156
I prefer to support American industry as an American, even for fighting the zionists. Especially for fighting the zionists.
>>
File: Literallyme.jpg (167 KB, 596x924)
167 KB
167 KB JPG
>>62754330
Ain't me
>>
>>62754292
>He is now a gym bro.
everyone should have a home gym
>>
>>62754347
Idk you Karen Carpenter but I wanna get to know your body maybe.
>>
>>62754350
Maybe I'll build one after I buy a few more gun related things and a drone.
>>
File: 20241021_171807.jpg (2.88 MB, 4000x2850)
2.88 MB
2.88 MB JPG
>>
>>62754354
He posted a selfie on Saturday
>>
>>62754355
home gym is gun related. I dry fire between sets
>>
>>62754365
What is that NF scope? I see it on every reddit gun.
>>
I'm really tired of FDE, bros.
>>
>>62754383
atacr 1-8
>>
>>62754404
Eh its not bad
>>
>>62754350
This is true. I was going to lift later but I'm going to start now just because.
>>
>>62754355
It's one of the best things you can do for yourself and it's not that much money compared to other gun stuff. You will use it 500% more when it's right there and you don't have to get in your car and driver somewhere just to work out.
>>
>>62754383
The NF Kindstranger Gold
>>
>>62754355
Why are you getting a drone to peep on sexy women in your neighborhood, Ash?
>>
>>62754383
>nf is reddit now
kys yourself
>>
Any of you guys just cruise on old highways as a second hobby? I always come across these awesome landscapes and think "Damn I wish I could be out there with a tent shooting guns." I also see a lot of random decrepit houses that probably have incestuous mutant serial killer inhabitants living inside.
>>
>>62754505
Yes I too Ar15s on old AR15s as a second hobby.
>>
File: burgietown.png (543 KB, 720x480)
543 KB
543 KB PNG
>>62754451
I dont have a neighborhood. I got like one house near me. Plus I don't creep on women I am a gentleman. I want a drone because I want to have a thermal drone down the road and I dont want to learn how to fly a drone with an expensive thermal drone. I already got my drone license I just gotta go buy one.
>>
>>62754505
no, I just surf the web
>>
>>62754519
Cool, what AR15 do you take? I have a turbo 4 cylinder AR15 to really get some highway mileage but I also have an AWD AR15 if I spot a logging road that seems promising.
>>
>>62754539
I take the ar15 AR15 because it shot.
>>
File: 20241023_071250.jpg (579 KB, 1848x2904)
579 KB
579 KB JPG
>>62754542
indeed
>>
File: Ueid9dn2ne.jpg (2.79 MB, 4000x3000)
2.79 MB
2.79 MB JPG
>>62754505
I've been driving aimlessly while listening to tunes or just thinking since before I could legally drive. Exploring is encoded into the dna of most men.
>>62754350
this is true
>>
>>62754593
Did you buy all your equipment new or off like craigslist/fbmarket? Was thinking of buying it off of fbmarket but I cba getting something and then later realizing they niggered the equipment.
>>
>>62754602
the only things I've ever purchased new were my belt, straps, and elbow sleeves. everything else was purchased used off marketplace, craigslist, play it again sports, etc. ive been meaning to upgrade the leg extension/curl but have gunsooming instead. don't pay new prices for gym equipment
>>
>>62754505
I have a bunch of places I go driving depending on the mood.
>>
>>62754370
lets see it
>>
>>62754654
It's not about saving money, it's about saving time. A 15 minute drive to and from the gym 5 days a week equals 130hrs of commuting per year, not taking into account having to wait on and share equipment with subhumans. I can blast music as loud as I'd like and dry fire my pistol between sets while wearing only silkies. The only thing I really miss from a commercial gym is a leg press/hack squat
>>
>home gym
All you need is 50lb dumbbells, working legs & time/motivation. You're already not gonna make it buying overpriced equipment.
>>
>>62754654
>>62754723
>>62754725
Fuck off to /fit/ retards.
>>
>>62754278
them there feets belong tos a man
>>
File: Ejod9ekbwbe.jpg (2.44 MB, 3356x2400)
2.44 MB
2.44 MB JPG
>>62754728
>his body isn't a weapon
by all means, go back to discussing troons
>>
File: Kcanon.jpg (305 KB, 1010x1172)
305 KB
305 KB JPG
>>62754676
>>
>>62754746
Go run a mile fatty.
>>
>>62754723
What a retarded cope. If your time is so valuable you should get off 4chan
>>
>>62754760
>all this projection
I hope you get the help you need
>>
>>62754772
Shitposting on the clock isn't "my" time, anon.
>>
>>62754759
tfw he will never have her curves
>>
>>62754773
>all this projection
Take a look in the mirror fatty >>62754746
>>
>>62754776
Yeah I’m sure there’s nothing better you could be doing instead
>>
>>62751671
RH25, even v1 will make a superior handheld to the UTM due to higher base display resolution. If you want a lot of clipon then its basically a done deal.
>>62754654
Think of it as insurance against a woman declaring you a rapist at the local gym though because you walked past her.
>>62754505
>incestuous mutant serial killer inhabitants living inside
So you're in indiana?
>>
>>62754814
The only times I’ve had issues with girls at the gym is when I made racist comments to them otherwise they don’t interact with me at all
>>
>>62754814
>Think of it as insurance against a woman declaring you a rapist at the local gym though because you walked past her.
I'm pretty sure that only happens to you.
>>
>>62754814
>Think of it as insurance against a woman declaring you a rapist at the local gym though because you walked past her.
this only happens to unattractive people
>>
>>62755048
It's over...
>>
File: Sick Saker.jpg (1.8 MB, 3268x2532)
1.8 MB
1.8 MB JPG
>>62753173
>All that
>Butler creek rear cap
What are you doing?
>>62755048
Exactly, the sort of people who dont homegym
>>62753649
TNTE sucks ass and has awful CS so theres that.
>>
>>62755095
>Exactly, the sort of people who dont homegym
Have you looked in the mirror recently?
>>
PSA sucks because they refuse to use CHF CL or at the very least chrome lined barrels in their many projects. QC issues aside, at a fundamental materials selection level the firearms PSA produces are talisman wallhangers, not meant nor intended to be trained with or used in any capacity that is truly indicative of the nature of a killing tool.

Hit PSA up on IG and DM them telling them to make more barrels CHF CL in their projects.

>>62753175
>>62753165
>>62753156
The fact that they don't use CHF CL barrels in an overwhelming majority of their firearms says it all.

>>62753867
Nice, what optic used?
>>
>>62755095
>Exactly, the sort of people who dont homegym
fair point
>>
>>62755135
>Nice, what optic used?
It's literally in the pic
>>
>>62755135
Barrels dont matter if they are fucking up gas ports, assembling them poorly, etc.
As demonstrated by the CHF CL nightmares they have pushed out.
>>
>>62753564
Thats not based and you are an obese retard
>>
File: 1719914764971937.jpg (290 KB, 1242x1225)
290 KB
290 KB JPG
>>62754505
>Any of you guys just cruise on old highways
Of course, its a natural compulsion.
https://youtu.be/v8FkLP8En6k
>>
>>62755155
The fastest way to tell if an AR company is legit
>is every barrel nitride or stainless
>extensive cerakote palerte
>>
File: IMG_3978.jpg (1.72 MB, 1170x1458)
1.72 MB
1.72 MB JPG
>>62755194
Bottom center is gross I’m sorry, is that the weird ass imi rifle?
>>
>>62755168
Nah it's very based. A low IQ individual like yourself wouldn't understand.
>>
File: 12841328.jpg (1.45 MB, 2388x3204)
1.45 MB
1.45 MB JPG
I haven't been shooting in months
>>
>>62755246
I went last week and I’m going tomorrow night to shoot with nods and remind myself why I hate my FL5
>>
File: regular AR-15.jpg (1.86 MB, 1755x2225)
1.86 MB
1.86 MB JPG
>>62755217
From the river to the seas, you can suck on deez
>>
Damn $700 for that junk
>>
File: IMG_3977.jpg (1.42 MB, 1170x1536)
1.42 MB
1.42 MB JPG
>>62755262
Hey I’m sorry bro, I just don’t like it. Doesn’t mean I don’t like you. Glad you do.
>>62755274
Gives me the same vibes as that Torrey pines piece of shit
>>
File: plank.jpg (951 KB, 1980x2602)
951 KB
951 KB JPG
>>62755285
just joshin u. Its been pretty good for the most part. The only reason I bought it is because I got it for dealer pricing ($1k flat) and it has a chf cl barrel. It might be good for suppressing if they ever release a shorter barrel, or even sell a regular barrel that I could cut down but otherwise there's not really any reason to buy one at regular MSRP over a bren 2 or XCR.
Motherfucker is 8 lbs completely unloaded with no magazine or accessories
>>
>>62755310
That’s a got damn tubafore
For $1k I can’t hate
>>
File: 20241023_115926[1].jpg (2.33 MB, 4000x2252)
2.33 MB
2.33 MB JPG
someone asked about my desk so I guess here is my desk lol
>>
>>62755424
Nice furry porn tabs
>>
>>62755432
you know it, I figured the suppressor cover would get called a fleshlight too
>>
https://youtu.be/QfuU5GjSf3o
>>
>>62755443
eastern languages make my ears bleed
>>
>>62755095
>Butler creek
The Armament.com cap added like half of inch to the back of the scope and made it bump into night vision more. The One Hundred Concepts was like a loud brittle sounding checkers chip, and it would flop around when the shock cord got stuck on a hard machined edge where the magnification ring knob goes on the scope. The front scope cap on the NF is a rubbery PWM 30mm modlite cap. I wish they made one for the ocular actually
>>
>>62755424
what do you do with a drafting table in year of our Lord 2024?
>>
>>62754505
I am always cruising backroads while brainstorming my next training evolution, New Builds, ammo purchase,etc.
>>
>>62755492
I'm a luddite and can't focus on the computer so I do all my drafting by hand and either make copies or give it to my architect and tell him to make it into computer format. Part of my philosophy is that if you can't do something by hand, you can't do it.
>>
File: IdeaExecution.jpg (795 KB, 2233x1605)
795 KB
795 KB JPG
>>62755554
and I do pretty alright I think, designed it and built it
>>
>>62755608
Looks great, very based keeping hand drafting alive. Do you just do it for fun? I assumed you were an architect or draftsman
>>
File: 20241022_092053.jpg (2.08 MB, 4000x2252)
2.08 MB
2.08 MB JPG
>>62755691
>Looks great, very based keeping hand drafting alive. Do you just do it for fun? I assumed you were an architect or draftsman
Nope, I work with a family business. I do project management, design work, I have a small finished carpentry business, and I just try to always keep the project moving and try to catch problems before they become problems. It's a lot of fun, plus all the subcontractors I work with are really good at what we do. Here's the inside of that house.
>>
>>62755151
Oh nice good stuff

>>62755155
Ree I want a 300blk Krink
And a 102
But like real guns, not toys.

>>62755246
You sure have been eating though
>>
>>62755424
I want a drafting table just to play with. Nice setup anon
>>
>>62755762
It's a lot of fun. Just coming up with cool floor plans is a great way to spend a rainy day without much to do. It also isn't that hard to get someone to take your drawings and convert them into CAD drawings and even renderings as long as you dimension things and draw proper elevations and profiles.
>>
>>62755747
Who makes those shotguns?
>>
Speaking of shotguns what shotgun is A2 approved to take down drones?
>>
>>62755845
None
>>
>>62755712
>>62755608
I hate modern building styles
Why do people want to dust above their cabinets? Everything’s a facade. Prefinished white is gross for millwork
>>
A2 is in E Coli meetings all day today guys, please direct your questions to the general audience
>>
File: 20241023_134543[1].jpg (2.29 MB, 4000x2252)
2.29 MB
2.29 MB JPG
>>62755845
not him but I like the benelli m2 and I can give you a reasonably good explanation why since I shoot way more shotgun sports than rifle sports. My primary shotgun sport is sporting clays, but I also do some pigeon shooting etc.

So, why the benelli m2 and not the m4 or other tactical options? For me, because I like the traditional grip with a shotgun, it is easier for me to go from low ready to on target. And when you are shooting targets that are coming in from a direction, the first thing you have to do is find it and see it before you can "aim" at it, you will not be doing this while you have the gun shouldered if you are competent. Next, ghost rings fucking suck for moving targets. Next, dedicated semiautomatic mechanically driven action, reliable and fast. Next, light weight. Next, no detachable box mag, just reload like you normally would a shotgun, you can always keep one in the chamber and reload as you go. If you have more than 5 targets or can't hit the drone flying at you in 5 shots, you're fucked anyways. Next, 24 inch barrel is as short as you really want to go for long range moving airborne targets. Next, lightweight, let's not pretend you are going to be running a shotgun as your primary. I can go on, but I really liked the way the M2 came together and I don't think you are going to get much better when it comes to a good combat utility shotgun.
>>
Should I keep my BCM mlok rails, or swap to quad rails?
>>
>>62755914
Lowkey args best rifle if you had a laser, rcr over sro, and a voodoo m.
>>
File: PXL_20241014_232505400~2.jpg (1008 KB, 2696x2014)
1008 KB
1008 KB JPG
>>62755823
Jiangshe or w.e Chinese factory
They're Saiga 12 clones. Both imported by SDS. Discontinued now. One is the Lynx 12 3Gun model, the other is the VP12. The Lynx 12 has been solid. The VP12 is the one I chopped. It has had several things break on it now. Not sure if that is because I opened the gas port too much and now it is running overgassed, but we'll see.
Trying to fix it and get it running without breaking shit. That being said it does run reliably with 00 Buck. I've got over 2k rounds fired between the both of them.

>>62755845
A2 doesn't believe in shotguns as an anti-drone measure.

I'm planning on trying to evaluate, but we'll see.

Hoping to see how this load performs at various distances. I'll be happy if it can consistently take down a floating ISR type drone at say 50m

https://www.sportsmans.com/shooting-gear-gun-supplies/ammunition-ammo-for-hunting-shooting-sports/shotgun-ammo-hunting-shooting-sports/migra-steel-shot-12-gauge-3in-13-1-14oz-waterfowl-shotshells-25-rounds/p/1659184
>>
File: 20240622_124533.jpg (2 MB, 4000x2252)
2 MB
2 MB JPG
>>62755871
>Why do people want to dust above their cabinets?
12 foot ceilings
>Everything’s a facade.
because the structure is concrete block you retard
>Prefinished white is gross for millwork
when you can afford to build a house one day you can pick your own colors/finishes, the good news is, you don't have to live in that house :) is this more your style?
>>
>>62755930
I don't like lasers, they give away your position. I was thinking about the trijicon skeet ir x, hadn't looked into the voodoo, and I picked the SRO because I like how open it is. Also thinking about removing the flashlight.
>>
>>62755747
>But like real guns, not toys.
>That photo
Pick one
>>62755845
None of them
>>
>>62755960
I hear the skeetx is decent but a friend of mine who has like half a million in thermals says the voodoo m is better than it. Ill contact him after he has moved into his new place and get his whole reasonings why he likes it more.
>>
File: 20241023_105945.jpg (698 KB, 1424x800)
698 KB
698 KB JPG
>we have vss at home
( ͠° ͟ʖ ͡°)
>>
File: 20241023_130752.jpg (1.83 MB, 2245x1719)
1.83 MB
1.83 MB JPG
>>62755135
>what optic used?
Arken, SH4 gen2. It's not gucci but it works for bench shooting.
>>
>>62755970
That and the only other thing I am excited about is URX6 because it looks like they are going to fix the fake free float of URX4 with a real free float of URX6. Thanks for the recommendation and info from your friend! Also, I got this sub-tac suppressor shroud that I didn't know I drunk ordered the other night, looks like woven kevlar with some kind of silicone outer layer around the kevlar and then a wrap. Did drunk me make an ok purchase for the time being?
>>
>>62755960
IR X probably best handheld but Voodoo M is just an improved UTMx, so superior for clip on use
>>
>>62755871
I too yearn to live in a soviet bustop
>>
>>62755981
>vss at home
not unless that's in 8.6 chimpout
>>
>>62755990
>Yummy lead
Anon stop this
Based SK shooter
>>62755981
Praying you didnt actually buy that
>>62755993
>Did drunk me make an ok purchase for the time being?
Its about the average performance wise , if that doesnt work then no can cover will
>>
>>62755225
Not even going to try to defend the obese comment are you?
>>
File: 20241015_165348.jpg (2.04 MB, 4000x3000)
2.04 MB
2.04 MB JPG
>>62756009
>Anon stop this
But it makes my bread sweet!
SK has been really good in my bergara, picked up a couple thousand rounds to learn fundamentals.
>>
File: 20240807_203753.jpg (3.05 MB, 3200x2204)
3.05 MB
3.05 MB JPG
>>62756031
Lesson learned, don't eat with lead on your hands, it makes you Australian.
>>
>>62756009
>Praying you didnt actually buy that
I regret to inform you. The optic was a bad teenage decision that's been collecting dust for years, the rifle was a truly despicable gunsoomer buy to cheaply satisfy the desire for a lightweight folding sbr and rock in mags since I sold my AK74. I will not shill either and actively advise anyone ITT to not buy either. The taste of poor decisions is bitter.
>>
File: AKB LC80.jpg (3.72 MB, 4032x3024)
3.72 MB
3.72 MB JPG
>>62756052
FM upper so bad , I pray for you anon
>>62756049
>This level of scope maxxing
Kinda insane dude, keep it up.
>>
>>62756008
Even 300 body odor mogs actual 9x39, but no, it's not even that.
>>
>>62756057
>FM upper so bad , I pray for you anon
Yeah the recoil spring system is fucking trash, the bolt carrier design is very half assed, and the charging handle is garbage. I have no excuses and defend nothing. I will hide this rifle under the floorboards of my kaczinsky shack and forget about it.
>>
File: AKB TP9.jpg (2.73 MB, 3024x4032)
2.73 MB
2.73 MB JPG
>>62756072
Wait until you install the suppressor spring and it becomes a worse G3 to charge.
Apple sauce engineering handle broke off which was top funny as well.
>>
>>62755881
Tried to poison qb with the qp
>>
>>62756087
I lubed the absolute shit out of every contact surface and forcibly hand cycled it about 100 times to get it to operate even somewhat smoothly. I had to disassemble it twice during that to wipe out the metal particulate filled lube. Honestly I should have shot it before I form 1'd the lower so I could have just sold it easily but it's far too late for that. RIP me.
>>
>>62753162
Damn, not smart enough to write a religious exemption? Many such cases, very sad.
>>
>>62753174
No, also you are an idiot definitely no.
>>
>>62755935
I have a 6000sq ft house that’s 100 years old, nearly paid off and looks way better than modern dogshit. My company builds miratech mansions too, I’m not shitting on you but modern homes are hideous
>>
>>62753217
>t. Doesn't shoot
>>
>>62756049
tell me about this colt upper anon
>>
>>62753232
Except break under the same force. Dipshit.
>>
File: IMG_8838.jpg (1.01 MB, 1170x1522)
1.01 MB
1.01 MB JPG
What do I do with this thing just cut it with wire cutters or what?
>>
>>62753564
Why don't you use stills from the video of you on the bike bro? Need some help with that?
>>
File: 20240129_160956.jpg (2.29 MB, 4000x2252)
2.29 MB
2.29 MB JPG
>>62756140
I build coastal homes, we're on saltwater. The only exterior wood I will use on a horizontal or vertical surface is ipe. And like I said, you don't have to like it, you don't have to live in those houses. Most people don't want a brick facade with dark woodwork in southeast florida.
>>
>>62753649
Do yourself and look for tnte reviews. Just get the H&R. Nodak spud good.
>>
>>62756182
i want a tinyhome on acreage with a qt trad wife to tend my garden while i take the cats on a hike
>>
>>62756175
wut
>>
>>62754236
Focus Tripp just made a video explaining how shit the fucking ris2 rail is. If you have no underbarrel attachments. How fucking stupid that there's only the co tact poi ts on the two screws on each side womp womp
>>
>>62756194
That guy is a huge faggot of course he hates it
>>
File: 20240809_192456.jpg (2.16 MB, 3326x1922)
2.16 MB
2.16 MB JPG
>>62756151
LE6940 (not 45) that was cut to 10.3" (so basically a 6945) for a nuclear plant security team.
It's pretty nice overall but it's heavy as fuck, the sight gets too hot to touch after three mags, and that's about it honestly.
It's just a good, solid, upper.
I wish I had the piston variation
>>
>>62756194
Perhaps the most reddit post ive ever seen in /arg/
>>62756190
Where do kids go?
>>
Not buying anymore LMT/KAC stuff until they pay their worker's fair wage's.
>>
File: 20241002_123200.jpg (3.65 MB, 4000x2252)
3.65 MB
3.65 MB JPG
>>62756190
exactly my plan, got some appalachian woods I'm going to build in, just have to keep building for all these people in florida to afford it, kinda given up on the tard wife tho
>>
>>62756212
that's the dumbest reason to not buy their shit, the correct reason is customer support from KAC sucks and I don't know why not to buy LMT
>>
>>62755258
Lol why? I like mine, though I mostly just use the illuminator.
>>
>>62756215
Damn I wish I had a waterfall on my property.
>>
File: 20241005_105557.jpg (1.34 MB, 2434x1324)
1.34 MB
1.34 MB JPG
>>62756206
you and I bought the same upper. how's the gas? as far as I know the 6940 had a smaller gas port than the short barrel variants. I've yet to put rounds through mine
>>
>>62756232
Because sometimes we use 6” steel plates and the laser blooms like fuck on them
>>
>>62755930
Why on earth do you honestly believe anyone would take your advice to heart?
>>
>>62756262
Lmao, from Clyde?
Gas is totally fine on everything until you use 77gr. AAC 77gr (2650fps from 16") was giving me a nasal purge every time I pulled the trigger.
IWI 55 and 62gr were flashy, but pleasant. And everything else (tula, random 55gr) has been whatever.
My can is still pending so I can't tell you what it's like suppressed.
>>
>>62756172
Yes just cut it off
>>
>>62756227
I'm just sick of poor QC and it won't get any better when they're paying Daquavius from Des Moines $15/hr. The rails, lowers, and barrels are great, it's their QC on the BCGs that's sucks. Undersized bolt tails, rough carrier tails that grind the face off your buffer, chrome that flakes off, gas keys that aren't even torqued down,just inexcusable shit for a $230 carrier. Sure they'll replace it but just send you another one that's shit. The gas keys coming loose on their enhanced carriers is like a given at this point
>>
File: file.png (366 KB, 480x360)
366 KB
366 KB PNG
>>62756172
>>
>>62756304
or just cut it as its off only and not on
>>
>>62756285
>until you use 77gr. AAC
Fuck. I have noticed that it smells like ammonia but I've never ran it suppressed.
>from clyde?
yeah, they're localish to me. they carry more used stuff than they list online and usually have pretty good deals in store. a lot of the trade in uppers they have listed as out of stock are just in a display case, for example. they usually have leo trade ins for a good price and just ran a "no tax" sale on ammo and firearms.
>>
>>62756304
I have a chinkshit g24 so it doesn’t stay in.
I’ll just circumcise it
>>
>>62755712
Very nice
>>
>>62756140
I'd like to see what you like or your houses cabinets look like and your rifle.
>>
>>62756215
>kinda given up on the tard wife tho
Same
>>
>>62756325
Fuck man why do you tell me this. Do they have any rail mounted clip on NV?
>>
File: PXL_20241023_192920103.jpg (3.66 MB, 4032x2268)
3.66 MB
3.66 MB JPG
>>62756190
Sorry best I can do is a tiny home next to another tiny home
>>
File: IMG_2910.jpg (258 KB, 1244x2208)
258 KB
258 KB JPG
>>62756404
>>62755285
>>62755217
Uhh here some of my guns
This is like the only interior picture I have of my house
>>
>>62756451
They did a few weeks back when I last poked around. They also keep separate stock of random shit for leo only (new and used) so if you have an "in" with a department you could have it shipped to them if it's not part of their civ offerings. But yeah, they carry a lot of thermal, nvg, and helmets.
>>
>>62756486
Wish they'd put it on the website, the only clip on they have there is the old school top mount.
>>
>>62756404
I just fucking hate the dust shelves above modern cabinets and the weird high up nooks in modern houses
>>
>>62756518
The alternative is soffits above the cabinets or 12' tall cabinets. I personally think 10' is as high as I like a ceiling, maybe 11' with really deep beams. The top of cabinets being dusty doesn't bother me at all. Who cares.
>>
File: IMG_1171.jpg (950 KB, 2246x2175)
950 KB
950 KB JPG
>>62755424
based florida bro
>>
>>62756509
I honestly wish they'd post fewer items online. I missed out on a compm4s + scalar mount for $599 because of boogeymen
>>
>>62756602
Nice collection, jelly of those 3.1s
>>
Don't worry bros, the businesses won't be affected
>>
>>62756710
Can you FUCK OFF. Your queer eceleb shit has no place here. I don't fucking care. I don't know this man, I don't know this woman, and I sure as shit don't want to know any of the sordid details of their personal lives. You faggots are worse than my mother going on and on about some bitch I've never met and her kids or whatever. Absolutely feminine behavior, soap opera ass nigga.
>>
>>62756742
Nah I'm gonna keep posting about it actually
>>
>>62756742
I wish there were more anons like you around. /k/ generals are too much discord-faggotry that huff their own farts.
>>
>>62756753
agreed
>>
>>62756749
Parasocial queer neck yourself and take your 'virtual relationships' with you, Mildred Montag ass bitch.
>>
File: Neko GT.png (758 KB, 891x720)
758 KB
758 KB PNG
>>62756742
>I don't know this man
newfag
>>
>>62756759
>Mildred Montag
Who?
>>
>>62756768
I know all about the YouTube channel 'Garand Thumb'. I'm not stupid and undeveloped enough to believe that the characters represented in this content have anything to do with the human beings behind them.
>>62756770
Read a book nigger.
>>
File: nni7xx8expl71.jpg (65 KB, 1200x675)
65 KB
65 KB JPG
>>62756710
>>
>>62756768
>a guy shoots guns and makes videos about it
cool, I don't care, I'm here to shitpost with other anons and compare notes on gear and shooting and stuff, go make another thread if you want to talk about some guy who we aren't talking to in this thread
>>
>>62756778
Take it to >>>/soc/
>>
>>62756776
he's a tripfag on /arg/ and occasionally reappears
>>62756787
oh
>>
File: 733_modelo.jpg (427 KB, 1241x931)
427 KB
427 KB JPG
>>62755747
>But like real guns, not toys.
probably best to just pay someone to build something out of a parts kit these days if you want something nice that wont fall apart on you. I accidentally got memed into doing this >>62756285
>Lmao, from Clyde?
they cant keep getting away with this
>>62756206
>for a nuclear plant security team
didnt know thats what these were for, kinda cool
>>
>>62756826
>he's a tripfag on /arg/ and occasionally reappears
And that somehow makes his personal life on topic? Kys.
>>
>>62756776
>Read a book nigger
Nah
>>
>>62756855
Sorry, you can go back to discussing troons again. Didn't mean to interrupt.
>>
>>62753151
R8 my build
Bear creek upper
PSA lower
Idfk the optic, I bought it from a guy at church
.350 Legend
Deerslayer
>>
>>62756975
Fucking awful but if it's accurate and you actually kill deer with it, then ok
>>
>>62756983
We'll see. It worked fine on my H&R lower last year. PSA just happened to have a sale on this lower
>>
>>62756975
please, for the love of God, move that optic up to the end of the upper receiver
>>
>>62756975
Are you trolling? Mount the optic forward, that’s what the cantilever is for. That rail is dogshit, that upper is dogshit, psa sucks cock, hope that lower is alright, hope the castle nut is staked, .350 whatever the fuck is a gay stupid straight wall round, the rifle needs a sling, and uhhh yeah
>>
>>62756271
>mine
Fuck, I only have 2/3rds sized uspsa sized targets and hardly use the laser. Is the laser the move for shooting off of odd angles or where does it really shine (no oun intended) like I said I usually do passive or use the illuminator
>>
>>62757008
>>62757009
I have no fucking clue how to mount optics. All my other guns I just use the iron sights.
>gay stupid round
Yeah, Iowa.
>upper and lower retarded
And under $200 apiece. I spend all my money on cars.
>>
>>62756742
Newfag, don't feed the trolls.
Jimmies status: Rustled
>>
>>62756829
>didnt know thats what these were for, kinda cool
I think it was Vogtle but that's just a guess, I haven't worked there yet. The plants I frequent use MCX SBRs with the PDW style collapsing stocks.
>>
>>62756776
Moron noob.
>>62756787
He used to shitpost with us on here you dumb noob.
>>
>>62757046
Move the optic forward. The vortex dot is kinda ass but honestly it’s good enough. Get a sling. Don’t bridge the optic between the receiver and rail, just keep it as far forward as possible. Usually I’d say get a light but if it’s for hunting that may be illegal. Hope your hunting endeavors are successful and that the rifle doesn’t fuck you over by jamming when you’re trying to take a shot. I don’t know what kind of ranges you see in Iowa but you could throw some cheap ass holosun magnifier behind it
>>
>>62757013
It’s just way faster to use lasers than dots.
Your head position doesn’t matter at all
>off angle
If you can reach it and see where it’s going.
Some guys will use the laser / muzzle on one level of vtac and look out another.
>>
>>62756975
damn, I wouldn't even want it for the price of a sandwich. poor deer.
>>
>>62757076
It's an upgrade over my rattletrap Stevens 12ga from 1928. Got a hundred rounds of Winchester to sight it in and break it in a little. If I don't get a deer it'll be my first year since age 14. We're push hunting so ranges will be close (35-70 yards) and the deer will be on the run.
>>
>>62757060
>He used to shitpost with us on here you dumb noob.
>I know
>didn't ask
>don't care
>you're still acting like a teenage girl
>>
>>62757060
Who Mike is or isn't fucking has nothing to do with us or the thread topic, faggot.
>>
File: IMG_7735.jpg (216 KB, 1024x658)
216 KB
216 KB JPG
Is this setup good for fighting the underground reptilians?
>>
>>62757148
Off to a good start but that setup looks a little long for the tight confines of a DUMB.
>>
File: Innaground.webm (2.93 MB, 1920x1080)
2.93 MB
2.93 MB WEBM
>>62757148
>300 weaksauce
>Against ayylmaos
>>
File: 2980359020309506.jpg (170 KB, 2496x1650)
170 KB
170 KB JPG
Doesn't getting divorced (twice) shatter your illusion of being a Christian when you break your vows and can't act like adults for your childrens sake?
>>
>>62757148
>>62757169
This. I'm not sure it has sufficient penetration to pierce their exoskeletons.

Also, how the shit do you hold it that you can activate that mod button, or what kind of ayyylmao hands do you have?
>>
>>62756742
What the fuck do you want us to talk about? ARs are solved & Mike used to post here regularly and undoubtedly got a lot of anons into guns.
>>
>>62757148
>thermal
>reptiles
>>
File: 1720148296556476m(1).jpg (109 KB, 1024x576)
109 KB
109 KB JPG
>>62757194
If you have nothing on topic to contribute simply do not post. Go be an emotionally destitute parasocial degenerate somewhere else. Maybe keddit.
>>
I currently have a LPVO on my "main squeeze" but am considering going back to the T2 since I already have a MPVO on the next highest barrel length;.
>>
>>62757210
Not to mention. Humanoid reptiliens are able to see IR naturally so hope u can into passive
>>
>>62757187
I'm disillusioned on marriage and women in general
>>
>>62757148
Nobody cares, gammacuck
>>
File: mountain SPR.jpg (1.93 MB, 2500x1534)
1.93 MB
1.93 MB JPG
>>62756476
i hate all these complexes popping up lately. especially in the EV.
>>
File: 20241022_221753.jpg (678 KB, 3000x4000)
678 KB
678 KB JPG
I just think they're neat
>>
>>62757222
Decent idea
Depends what yer doing but supportative of that 11.5+can having a dot
>>
>>62757290
I'm seriously considering selling my house in North PHX once that big TSMC plant outside Deer Valley / Anthem goes live and interest rates drop a bit. Just gonna take my equity and go somewhere with a better long term outlook. It definitely isn't the valley, between the refugees, the water, the climate, and being the worst funded education system in the country.
>>
Why do lancers make my bolt not feed right and the bullet get jammed into the case like it has phimosis
>>
>>62757321
because lancer mags make you gay
>>
>>62757302
You aren't gonna like this it's a 12.5
>>
File: flor.jpg (1.43 MB, 2500x1000)
1.43 MB
1.43 MB JPG
>>62757304
>once that big TSMC plant outside Deer Valley / Anthem goes live

the first fab is already operational and base-build on fab 2 is going to start early next year. probably a year or two for base-build and another couple years for tool install. what makes you think youll last that long?
>>
File: IMG_5080.jpg (3.01 MB, 4032x3024)
3.01 MB
3.01 MB JPG
>>62757148
depends which ones youre going after
>>62757169
reptilians arent ayylmaos
>>62757190
this
>>62757210
also this
>>
File: Pie in the sky.webm (2.89 MB, 640x512)
2.89 MB
2.89 MB WEBM
>>62757335
They dont have american citizenship and that makes them an alien in my book pal
>>62757321
Because lancers fucking suck
>>62757331
You're right, I dont like that. But I will tolerate it.
>>
File: PXL_20241020_173402357.jpg (2.21 MB, 4032x2268)
2.21 MB
2.21 MB JPG
>>62757290
They're going up across the country, its the hot market. Texas, and Idaho are the next big places for it. B2r is the current meme
>>62757215
Damn what a nice picture
>>
>>62757333
>what makes you think youll last that long?
I'm in no rush I suppose, my mortgage is extremely cheap and my AC is brand new so I'm just chilling. Main issue is I just don't know where I'd go. Everywhere has its issues.
>>
File: DSC04038.jpg (338 KB, 2661x1496)
338 KB
338 KB JPG
>>62757148
>Thermals for a cold blooded creature

Ngmi
>>
>>62757342
Why is the 958 Cayenne the best overall suv ever made?
>>
File: KAC BCGs.jpg (532 KB, 2500x1308)
532 KB
532 KB JPG
>>62757347
as a new homeowner ive come to hate apartment complexes and tiny home complexes. especially in areas where the infratructure isnt in place to compensate for all the extra traffic associated with them. REEEEE
>>
>>62757367
I hate them because I live in one, and have done so for three years, and every time I think I have the money saved some disaster happens or acreages shoot to the moon in value again. My lack of land causes me immense psychological stress.
>>
File: 17s - QDCCQB.webm (2.46 MB, 1280x800)
2.46 MB
2.46 MB WEBM
>>62757354
Because you were dropped on your head as child. Terrible choice.
>>62757444
Born too late to buy land
Born just in time to finance pizza
Look at the bright side
>>62757367
>infratructure isnt in place to compensate for all the extra traffic associated with them
Bro its just walkable now ok because we said so
>>
Help im retarded why isn't my magazine seating with the bolt forward? Fits fine when I pull it back but no dice on slamming it in
>>
>>62755424
Nope nobody asked in this thread.
>>
>>62757478
Ok disregard. Slamming does in fact work
>>
>>62757453
should I stack DM-1 belts or M13 links for HK21? Starting from essentially scratch, have a few thousand links and like 3 50 round DM1 belts, also picked up an old MG3 belt loader. 0 MG knowledge so not sure about operational differences, just heard links may have some feeding issues in HK21 due to round spacing
>>
>>62757478
You over loaded the mag
>>
>>62757453
Incorrect opinion mr. grip. I hope you are able to correct it soon.
>>
File: Schmeisser Boof.webm (2.68 MB, 1920x1080)
2.68 MB
2.68 MB WEBM
>>62757478
You sure you put in 30 not 31?
You sure youre not being a bitch?
>>62757489
M13s wont work too well unmolested, you might need to have your feed spur cut
Place your DM1 next to an M13 belt and compare the spacing of the rounds, the spur needs a deeper valley to be able to accommodate that tighter spacing found on nato links. If you do end up able to feed nato links its going to crush the fuck out of them, clearing malfs on that gun also just no fun. Try to find some cheap 42 belts along with DM1 , eventually mod for M13 . A good 42 belt will last a loooong time of being ripped thru these guns assuming you dont step on the thing too much
>>62757498
Terrible car dont @ me
>>
>>62757488
It's normal
>>
>>62757519
You are objectively incorrect.
>570hp 590torque
>lockers
>sway bar disconnect
>11" ground clearance
>big enough to sleep two men and a femboy
>doesn't randomly explode like JLR products
I'm thinking based
>>
>>62757210
Thermals can see reptiles.
>>
>>62757535
Some people think reptile blood is literally cold. I have had to explain to people that cold blooded just means that they need external heat sources and can be seen by thermal.
>>
File: Everything Fails2.jpg (2.3 MB, 4640x4176)
2.3 MB
2.3 MB JPG
>>62757531
Bad approach/departure angles compared to comps
Impossible to maintain terrible tiny expensive control arms
Lifting nigh impossible
Tiny tires
No bumpers
etc

Thing is a uptrim touareg. If your idea of offroading is driving on gravel roads occasionally, sure.
>>doesn't randomly explode like JLR products
Where is the excitement in that ?
>>62757552
>>62757535
Sorry pal ive played mw2 and cold blooded is invisible on thermals
>>62757489
Also watch your starter tabs, the 21 tabs will attach from the other side because belt go upsidedown.
>MG3 linker
Really only going to work for classic 42 belts and DM1. DM6/M13 a nogo on that thing. But a cool piece none the less, the old style 42 linker superior as you dont have to hold belt since it has a tiny topcover to do so.
>>
File: How short do you want it.jpg (1.29 MB, 3264x1267)
1.29 MB
1.29 MB JPG
>>62757148
Sigger/10
>>
>>62757565
Quite literally all of those problems have been solved by a funny yellow man at shop.eurowise.com
I haven't decided how far I will ruin the cayenne, I very much enjoy how it looks at present.
>>
File: Mk12 Ladder.jpg (2.52 MB, 1907x2638)
2.52 MB
2.52 MB JPG
>>62757578
>$2600 bumpers that dont protect anything
>Solved
Anon please put down the crackpipe. Leave the mom mobile alone.
>I very much enjoy how it looks at present.
I stand by my initial statements
>>62757567
Whats going on with that red dot there buddy?
>>
>>62757584
Do you use your bumper exclusively to drive into solid objects with your headlights?
>>
File: Golden Dorito.jpg (3.31 MB, 3216x2832)
3.31 MB
3.31 MB JPG
>>62757601
Yes
Ive racked up a few animals, random obstacles and other things.
>>
>>62757627
Understandable, carry on. I'm sure if I had a similar usecase, I could simply weld more steel on to the front bumper.
>>
>>62757627
Cows, if I recall. Must be the deer rut here, saw a buck get spun by a jeep this afternoon. Hope it lived.
>>
>>62757187
the way you frame this makes you sound like a child. It shattered something but if GT is a Christian this doesn't really change a ton other than complicate things, thus is the plight of a lot of Christians AR15
>>
>>62757726
It's that time of year.
>>
File: IMG_5607.jpg (3.57 MB, 4032x2846)
3.57 MB
3.57 MB JPG
Which color ?
>>
File: IMG_3638.jpg (1.18 MB, 1179x1929)
1.18 MB
1.18 MB JPG
>he's upgrading again
>>
>>62757768
Repost. Fuck off Euro
>>
>>62757742
>color swatches
idk isnt this something your wife should be picking?
>>
File: DSC_2416__34663.jpg (88 KB, 1280x1280)
88 KB
88 KB JPG
Went out for a brief shooting session, more to just test cycling after working with gas blocks/tubes. I saw two dead pitbulls on the side of the trail thought that was based. I shot the 10.3" with a snub compensator and it concussed the fuck out of me it's a total meme length without a moderator to mellow it out.
>>
>>62757806
>10.3 is loud
ok
>>
>>62757742
Front, doesn't really matter. Not the second from front, looks pink. Just rustoleum bomb that shit.
>>
>>62757768
wie gehts digga
>>
>>62757519
I don't understand why the grey wind cheater appears green
>>
>>62758066
Cause it’s green
>>
>>62758134
Nah, I had a grey one before and it looks green to me
>>
>>62758154
I have a green one and it looks like that
>>
>>62757627
magnification a meme for full auto on the AR platform?
>>
File: PXL_20241014_232547982~2.jpg (3.06 MB, 2994x2911)
3.06 MB
3.06 MB JPG
>>62755967
The Lynx unironically is good to go, but yeah the VP12 SBS needs to be ironed more.
Current plan to fix the broken piston op rod is to take two standard AKM piston op rods (incoming from AKoptions), to chop them and graft them together (welding) to create a longer one that matches the length of the original. We'll see how it goes.

>>62755990
The Arken stuff seems passable for budget optics
My buddy has one and while it definitely isn't very clear and has a bit of tint and color, it does work.

>>62756057
Fun pic

>>62756829
Yeah I've got two pretty nice 7.62x39 AK builds, both using real euro parts kits and FN CHF CL barrels, built right. I do want a 5.56 AK SBR, ideally a 102. I could have that built out of a kit indeed. A 300blk Krink on the other hand, that is a bit tougher to have built.
Do me a favor if you're in the mood, but DM PSA on IG and nag em to do more CHF CL barrels.
>>
>>62758212
Those grips look like shit, buy magpul.
>>
File: 20241023_173749.jpg (2.68 MB, 1819x3936)
2.68 MB
2.68 MB JPG
Recliners are a pain in the ass to move
>>
File: shitbox.jpg (532 KB, 1629x880)
532 KB
532 KB JPG
>>62758337
trypophobiafag detected
>>62758212
>I could have that built out of a kit indeed
ya I cheaped out and just did a WBP kit to turn into an old AKS-74 in 556, didnt even shill out for a super nice barrel because its explicitly a range toy that ill barely shoot. You could probably use one of those kits to cobble together a 4.5 folding trunnion pseudo 102 if you are willing to let this project be a money sink. I think 556 AK is the move though if you wanna shoot, gotta try out those 556 followers for 545 mags to see how well they work. If you want to wait a little bit ive got a buddy who wants to get a 300 krink, I can let you know how his is, but youll probably hear about them exploding on the internet before that desu
>>
File: image (1).png (3.17 MB, 2311x1158)
3.17 MB
3.17 MB PNG
I got an Ozempic commercial after ordering kfc online
Tested the zero retention of the qd ADM mount since I took it off to RTV my charging handle. The two groups were on different days so it's not super scientific. Looks like about 1/2 MOA low, good on the windage.
>>
File: PXL_20241020_215425714~2.jpg (2.82 MB, 3024x2636)
2.82 MB
2.82 MB JPG
>>62758392
My thing at this point is that I want CHF CL barrels or at the minimum CL barrels for any rifle I'm buying/building.
An AK102 project would be awesome and I could use a Romanian parts kit for basically everything except the folding rear trunnion and the front combo gas sight block, but folding rear trunnions can be found, and I would just use the PSA front combo gas sight base block. The hard part of course is the barrel. A CHF CL 5.56 AK barrel isn't the easiest to find. They're out there, but I would have to probably get a 16" turned down to 12.5" for the build.
>>
Where's the baker?
I have questions and we're done here.
>>
>>62758822
I might in an hour or so
>>
>>62756476
Oh god, it's Mexican infonavits and colonias coming to the u.s.
>>
>>62758822
ok im baking
>>
>>62758886
Wait please let me do it I never get to bake
>>
Baked
>>62758898
>>
>>62758899
Bitch
>>
File: IMG_20241023_224545.jpg (267 KB, 1080x1920)
267 KB
267 KB JPG
wife is taking the kids, cmmg 22lrconvert in 20" aero upper, kms or suck it up edition.



[Advertise on 4chan]

Delete Post: [File Only] Style:
[Disable Mobile View / Use Desktop Site]

[Enable Mobile View / Use Mobile Site]

All trademarks and copyrights on this page are owned by their respective parties. Images uploaded are the responsibility of the Poster. Comments are owned by the Poster.