[a / b / c / d / e / f / g / gif / h / hr / k / m / o / p / r / s / t / u / v / vg / vm / vmg / vr / vrpg / vst / w / wg] [i / ic] [r9k / s4s / vip / qa] [cm / hm / lgbt / y] [3 / aco / adv / an / bant / biz / cgl / ck / co / diy / fa / fit / gd / hc / his / int / jp / lit / mlp / mu / n / news / out / po / pol / pw / qst / sci / soc / sp / tg / toy / trv / tv / vp / vt / wsg / wsr / x / xs] [Settings] [Search] [Mobile] [Home]
Board
Settings Mobile Home
/o/ - Auto


Thread archived.
You cannot reply anymore.


[Advertise on 4chan]


>>
>>28208638
Okay, do you have an actual sword at home? In your house, somewhere, that you can and do use to cut things, according to historical techniques associated with that kind of sword? Doesn't have to be a katana.
If so then fine, whatever.
If not, look, it's just a bigger stick than it needs to be, which gets in the way of reaching the vents and the radio. You're not impressing anyone with something that's going to start a conversation you can't finish.
>>
Just buy a machete and keep it by the passenger seat ffs. Holding a shifter with your hand rotated also makes it more likely you'll do a 3->2 money shift in stead of getting 4.
>>
>>28208638
That is the final rice.
>>
Better idea.
I used to know a guy who did something similar to this. He mounted the guts of an airsoft gun just behind the grill of his car and wired it up to the trigger on the flight stick so he could leave tiny little dents on douchebags that cut him off.
>>
i cant
>>
>>28208652
Oh please, lets not be SAVAGES.
>>
>>28208658
always wanted to do this but could never figure out a way to make the gun inconspicuous if i was ever stopped for it or anything else
airsoft bbs are hilarious to just throw at people though
homeless crackheads fuckin think your tossen em handfuls of percs
>>
File: 1705733682821234.jpg (20 KB, 720x400)
20 KB
20 KB JPG
>>28208652
>>
>>28208638
Ball knob is peak
>>
>>28208663
Generally speaking, you'd cut most of it off, and you pick a model that runs off 12v DC so you can just power it with the car's electrical system. That means any stocks, grips, sights, and a lot of the barrel since you really don't need that much.
It's not like you're ever going to put a real gun there, if you needed that you'd also need a way to aim it independently of the car.
>>
File: IMG_20250113_193857099[1].jpg (771 KB, 2688x1364)
771 KB
771 KB JPG
>>28208662
Fuck that pretentious shit. Embrace your inner savage.
>>
>>28208699
that's the problem
good aegs typically run 11.1v lipos so 12v car battery is probably okay
But the structure of an airsoft gun that holds the functional internal bits together is the part shaped like a real gun, for example the barrel and hop unit need the receiver to stay attached to the gearbox, and the magazine typically needs the receiver to stay interfaced with the hop unit. I was thinking you could use a gravity feed with a nondescript rubber tube but I can't think of any decent AEGs with a hop unit that feeds from the top, except the TM-style P90. However that still needs the upper receiver at least to hold the barrel to the rest of the gun, so it will still look to any cursory inspection that there is a gun in your engine bay. Probably the best bet though, you could strip most of the gun shaped plastic away and just have a black aluminum inner barrel poking out so it just looks like a weird car part.
combine with a mosfet trigger and then wire that to a joystick shifter and pew pew till the piston strips.

In Minecraft of course
>>
>>28208740
>strip most of the gun shaped plastic away
That's exactly what you do. You only need the mechanism installed. You don't even need the barrel to poke out, you just need it aligned with the grill.
>>
>>28208763
you still need at least a bit of gun-shaped plastic to hold the operating parts together and mount it to the car, though you could do away with the sight rail and grips, physical trigger is now unnecessary since it's being fired by microswitch, but you'll still have the lower half of the upper receiver, which holds the barrel and hop unit and the back end of the lower which has the gearbox in it. just imagining it, it will still look like a gun lmao.

it would need to be away from engine heat and water splash so it might end up being slightly visible from the outside, plus it still needs to be easily removed and reloaded. i'm not saying it can't be done but it's tricky to make discrete.
>>
File: weebshit.jpg (1002 KB, 2160x2160)
1002 KB
1002 KB JPG
>>28208638
Nah, be the weeb trash you are
>>
>>28208740
Well, I'm sorta thinking from the perspective of I have one of these (but airsoft), and all this stuff that's been scribbled over in red can be removed or hacked off and it'll still get pellets out of the magazine and out the front (not shown: the charging handle does nothing so it can come off too). The trigger on my model just causes the one motor to spin, so the actual trigger you put your finger on can come off, and the electrical contacts placed in the switch inside the passenger compartment.
>>
kill all ricers and millennials
throw them in ovens and bake them to death
stab them with samurai swords
>>
>>28208646
I'm actually part of an Italian long sword school and do HEMA shit on the weekends. Unfortunately, I've never seen a shift stick styled after a long sword hilt.
>>28208787
Meme's aside how does the thing actually handle?
>>
>>28208646
African machete
>>
File: 1736633679698290.png (2.15 MB, 1806x1720)
2.15 MB
2.15 MB PNG
>>28208663
>homeless crackheads fuckin think your tossen em handfuls of percs
>>
>>28208897
>take long sword
>chop blade off
>weld on nut for shifter threads
>proft
>>
>>28208689
Heh, you said "ball knob"
>>
>>28208897
>how does the thing actually handle?
I honestly enjoy it more than I thought I would. Just for casual driving its fine, never misshifted with it. I do find myself holding it on top like a regular knob instead of on the handle though
>>
File: ITS_TAPE.png (87 KB, 550x541)
87 KB
87 KB PNG
>>28208638
>>28208646
IT'S TAPE
>>
>>28208638
this is extremely gay, and the people who do it have an even smaller dick than they accuse truck guys of having.

the worship of katanas is especially funny given they were historically known as shitty swords.
>>
>>28209824
But what if I'm putting it in a truck?
>>
>>28208638
This looks like shit and doesn't even match the aesthetic of the interior...it's something a kid would do to his car then laugh about how gay it was 10 years from now..
>>
Cars would be more fun if more people did more dumb tacky stuff like this. Yes, you will be embarassed by it someday but now is the time to do it.
>>
>>28212007
based mirthful fun enjoyer
>>
>>28212007
i got one of those japanese flower shifters and got a lot of nice compliments tbqh, people think it's funny
>>
>>28212007
no. you know who customizes their cars? pajeets.
>>
>>28212456
pajeets breathe air and drink water too, so you should stop doing both of those things immediately and permanently, "white" man.
>>
It's tacky
Make your own shift knob with hardware
>>
>>28212456
And Mexicans
>>
>>28212456
>Car customization is bad
Where do you think you are?
>>
>>28208662
>pull up next to asshole
>throw pommel at him
>drive off
>>
>>28212456
scared of jeets lol
>>
>>28208638
I think you should do it. After a few months you'll realize its stupid and switch back. But if you dont do it you'll always think it wouldve been cool, and cant grow.
>>
>>28208780
It's just a block with a tube and a hopper.
It would look like an overflow tank or power steering reservoir or something if you did it right.
>>
File: fear-my.png (52 KB, 405x269)
52 KB
52 KB PNG
Do it. Anyone who shits on you is an institutionalized normalfaggots what doesn't have the balls to go against the grain. Normies fear whimsical nature like a car fears the vacuum cleaner.



[Advertise on 4chan]

Delete Post: [File Only] Style:
[Disable Mobile View / Use Desktop Site]

[Enable Mobile View / Use Mobile Site]

All trademarks and copyrights on this page are owned by their respective parties. Images uploaded are the responsibility of the Poster. Comments are owned by the Poster.