File: Group Build (2019_01_03 1(...).jpg (191 KB, 4113x583)

191 KB JPG

== NIGHTMARE GROUPBUILD ==

Build a mecha encompassing different aspects of the horror genre. Examples include
>A mecha that incorporates general horror tropes from literature, film, and anime
>A corrupted version of an existing mecha/robot through magical, biological, or alien means (ie Symbiotes, parasites, Daemonic possession)
>Organic mecha (ie Evangelions) and monsters from /m/-related media (ie: the BETA from Muv-Luv)
>A mecha that draws inspiration from various demons or monsters from different mythologies and religions.

Submit your entries to gunplaplamo@gmail.com , include at least 5 finished pics and any WIP pics you took while working on your entry, as well as a brief description of your build.

START: 8/14/24
END: 10/31/24

File: 1702162823175450.jpg (150 KB, 1600x852)

150 KB JPG

Just watched War in the Pocket. It was okay. Those who pushed it to me as the "best stand alone Gundam story" need slapped very hard.

>>11144486
It is very overhyped for sure. The Zeon designs are neat though.

>>11144486
>War in the Pocket.
>best stand alone Gundam story

Only ever heard people say that about 08th.
Thunderbolt is better than War in the Pocket.

>>11144591
>thunderbolt
>wacky space cult is behind everything
nah

>>11144380
I really like these but the armor makes it look like they have dicks.

>>11144650
Sadly it doesn't, Bandai is to much of a fag to ever give us something like that.

>>11144591
>Thunderbolt
Fuck that literal noise, the soundtrack makes it unwatchable.

>>11144486
I bet you like Turn-A or SEED Kek

>>11144685
Homie I've never touched Seed and I can't remember what happened in Turn_A

>>11144685
Turn A is pretty soul until they go to space, which fittingly is the first use of CGI in the franchise

File: Mobile Suit Gundam Thunde(...).jpg (1.87 MB, 2200x1600)

1.87 MB JPG

>Thunderbolt
I don't know how the anime is or even how the manga progresses after volume 1 but this page is a big reason for me starting gunpla as a hobby.
But I do probably have very bad taste because
>Gundam Wing
love it, always. I often hear that Gundam fans don't like it that much.
>witch from Mercury
Had a lot of fun with it but the fights were too short.
>Mobile Suit Gundam F91
Loved the opening scene (the invasion), the music and the visuals but it drops a lot of potential when the plot just stops and runs circles for an hour before the final happens.
>Mobile Suit Gundam: The 08th MS Team
People told me it was one of the best gundam media but I really did not like it. The music was great but that 9/10 character ended up being comedic relief characters (whos comedy didn't do anything for me) ruined the show for me.

>>11144674
>He can't handle a bit of jazz

>>11144674
Fucking zoomer

>>11144486
It has the best story but if you want to see giant robots shoot each other you better watch 0083

>>11144380
Oh hey, you used my Acerby.
Neat.

File: gouf.jpg (771 KB, 1481x2991)

771 KB JPG

I've build pic related yesterday. The build was easy and fun. Head, body and waiste did not have any nob marks but shoulders, arms and legs ended up with some. Panel lining the "chain whip" wasn't nice and bending it isn't that nice either. Biggest problem is the non existing articulation in the body and ancles.
I planed to pose him like in pos.1 but this is so instable that he falls over if someone sneezes across the street. Now I've posed him like pos. 2 and he is stable but I'm a bit sad because it doesn't highlight his special weapons (whip and gun fingers). But the spiked shoulder pauldrons and the pig snout still rock.

>>11145005
>>11145398
Fuck off it's garbage and you know it
>Zoomer
Sure if you say so

>>11145726
you could get a cheap stand

>>11145726
Put a tiny bit of sticky putty or blue tack under his left foot if you can't get pos.1 to work. I've found for poses like that you are really relying on the torso weight to keep the foot flat which takes a lot of fiddling with the angles.
I prefer the whip to the Gouf Custom grappling hook which is just a thin plastic wire that "remembers" every slight bend.

>>11144486
>the "best stand alone Gundam story"
0080 isn't great, but this statement is still true.

A bit off topic but how is Gundam 00? I like the designs.

>>11145786
i dropped it faster than gundam seed

>>11145794
It does start extremely slow. Second season is more pew pew.

>>11145786
kenji kawai OST always get me hyped.

>>11144674
tasteless faggot

>>11145869
GARBAGE.
https://www.youtube.com/watch?v=hrLvoyFpLGc

>>11145786
00 is like every Gundam spinoff: good first season, ass second season, and overall you're better off just watching a different show than "Gundam but X"

>>11145786
It has some similarity to Wing, but executed better. The characters are all very cardboard but it has good action and designs.

>>11145872
Not liking jazz is the most surefire sign of being a disgusting little underage cum sock

>>11145786
It's as worth watching as any other Gundam series really. I actually kind of don't like the designs of the main gundams in 00, something about the thinness and the angles. I'm a big fan of the Tieren, and the Anf though so.
>>11145914
>good first season, ass second season
This does keep being the case. it also feels like season 2 just rewrote half the characters.
Also I'm gonna go ahead and say that people overly hate on Seed.

>>11146001
Sure.

>>11144674
Agreed
>>11145398
You are the zoomer who likes that shit show

>>11146064
Didn't say anything about the quality of the show, just that the music is good (objectively true)

is it a bad idea to store kits close to a window?
the window is closed of course, but would the cold fuck things up and stuff?
i am talking unassembled models in boxes right beside a window.

>>11146370
Plastics and paint don't do well with UV.
Are the temperature fluctuations big? the daily heating/cooling will cause paint and stickers to peel.

I've ordered the HG Wing Gundam Zero, now I only miss the HG Sandrock. I hope he will be back in stock at some point.

>>11144381
greetings from the spooky skeletons thread. we've been talking about how to do a visible skeleton inside a clear shell...
>>11146633
are there articulated anatomical robot model kits?

>>11145726
Bandai did us a solid by giving us a closed fist for his fap hand, they didn't have to do that

File: RG Wing Gundam Zero EW.jpg (82 KB, 1000x619)

82 KB JPG

Any opinions on this gunpla?

>>11146400
no i mean just the boxes with runners, unopened ones
the box should be enough to protect them? plus the bags they are in?

>>11147052
It's not great. The wings pop off very easily.

>>11147060
Is it really that bad? Do you mean the wings as in the whole backpack or the tiny feathers? Does it pop off by themself or when you touch/pose it? I would just pose him once and then leave it as the center piece of my gundam wing shelve.

>>11147054
Spiders may work their way in and build the plamo before you do

>>11147052
Get the MG instead.

>>11146461
>HG Wing Gundam Zero
Word of warning, the arms pop out very easily with that one.

>>11147124
no that wouldn't fit at all.

>>11147074
The whole backpack. It's heavier than the main figure too. The frame itself is also a floppy mess. I was very disappointed by it.

>>11145740
Hope you improve in taste soon mate

>>11147054
The box will get damaged by the sun if you care about that.

>>11147825
I ain't your mate, pal

>>11147054
No, the sun will permeate the box and denature the plastic, especially yellow plastic.

>>11147742
>>11147060
I've never had any problems with my rg wing zero, it's solid as a rock and the backpack holds poses just fine. How old is yours, mine is a first release, it could be mold degradation.

>>11147125
Also never had much of a problem with my tv zero, my standard hg wing and flame ferder though definitely do suffer from this.

>>11145914
>>11146007
Wouldn't say 00's second season is ass necessarily... it's definitely got a drop in quality, but It's lows are still highs compared to some other gundam moments.

I understand why some people prefer the s1 MS design, but you can't tell me that Exia R2 isn't a massive upgrade.

okay so you all say no wing zero EZ, then I will order both the Zoworts instead while I still have the chance.

>>11147899
I can't tell if you're joking or not. A lot of my backlog kits are stored by a window because it's the only free storage space I have right now. I keep the blinds closed, but a lot of heat still radiates in that area.

File: IMG_20240910_112608090.jpg (2.47 MB, 4080x3072)

2.47 MB JPG

Got these lads in today

>>11148482
Good choices bro.

File: Jim Spartan.jpg (1.15 MB, 3831x2267)

1.15 MB JPG

Ordered some sets off aliexpress, jim spartan was the first to arrive, its pretty gud but some of the polycaps dont fit easily into the plastic and need a bit of work. I like that it kinda matches my full armor rx78.

File: 153_2993_s_6loj5oe2vdi1ik(...).jpg (140 KB, 1200x1200)

140 KB JPG

Bought one of these at the gundam base tour without thinking it through. What's the best way to deal with nubs on clear parts and the touch-gates?

>>11149275
Glass file and water.

>>11147052
If you get that one, be VERY careful. Some of the parts come preassembled and are fragile until you assemble them. Best word of advice is to make sure when you twist anything to assemble it, you do not hold either side of the joint too far apart. That's how you wait 6-8 weeks for a replacement part. The bottom set of wings need some top coat applied to cylinder that connects them, to keep them from falling. Otherwise, I like the model.

I've seen a video where the Gundam Marker EX Chrome was used behind clear (like visors) parts to make them look better/ catch the light more.
Now when I search for that marker there is non called "chrome" only plated Silver and Shining silver. Anyone here using them which of them would be the right one?

>>11149902
Molotow might be easier to find. I know Hobby Lobby has it if you want one right now.

File: 613.jpg (77 KB, 1197x898)

77 KB JPG

Does anyone have one of these 30MM kits? Are they any good?

>>11149910
thank you

>>11149489
What is it with this Gundam? I've watched 5 reviews of this kit now and non talked about any of the problems mentioned here but the comments are full with people talking about that stuff. Feels like it's a real lottery, you either get a perfect kit or you can just throw it away.

Are joints loosing over time a problem with these kits?

>>11150031
It can be depending on the kit and how much you repose them, but generally it's not an issue. Older kits or heavier limbs are more susceptible. If it really becomes a problem then fixes are easy.

File: 30mm – Customize Weapons (...).jpg (84 KB, 1024x1024)

84 KB JPG

Does anyone know if these girls (>>11144380) can handle the gatling? I know that it will fit in general because it's all 30mm but I'm not so sure if the girls have the arm's reach necessary for it.

File: IMG_20240912_132104673_HDR~2.jpg (1.07 MB, 2577x2886)

1.07 MB JPG

You know, it looks better than I thought it would in gunmetal blue. Now I just need to get some scraps and get that head right.

Do you use sanding on every part?

>>11151453
Nah.
For example if you have an internal partthat you'll never see when it's done, why sand it if it fits perfectly fine anyway?
You just need to sand the parts you see.

File: 1701858853579647.jpg (165 KB, 2000x1500)

165 KB JPG

>>11151181
Looks sick homie. I did my Tallgeese in TV anime colours.

>>11151672
what happened to that face mask?

>>11153036
Paint went a bit apeshit at that point.

>>11149375
nta but does water really help those?

>>11153309
Certainly does. Even with normal plastic. Keep in mind it wont fix stress marks from cutting too close. The water acts as a lubricant and reduces friction a bit.

>>11153768
>Keep in mind it wont fix stress marks from cutting too close.
nta, why not? I thought that is one of the main reasons why you even do sanding.

>>11153934
Only thing that can fix that is paint, really. You need some nub to grind down.

Hey Plamo, maybe you can help me. I recall an old gundam model kit I had that was basically a greyish blue ball with a red trim around the mono eye lens and claw like arms.

Any idea what the name of that model might be and what recent versions are available?

>>11154030
Rb 79 ball? Capule?

File: Hguc-ball.jpg (700 KB, 1200x761)

700 KB JPG

>>11154030

>>11154035
>>11154038
YES! Thank you so much anons!

>>11154048
Np. There is also a master grade, larger version, more detailed version, a ver ka mg with extra arms. The hg is cool but the pincers dont actually close.m, but you do get 2 balls for about $15 and thats a steal.

>>11153934
You are misunderstanding the problem. Sanding is a preventative measure, you are supposed to snip far away from the part then sand the remaining nub down to nothing. If you snip close to the part, it will likely stress the plastic, and then you're way past the preventative stage, you need to start looking into fixes at that point.

>>11153934
As others said, the stress on the plastic is it being stretched and torn. You can't sand that away. Well okay you can sand it away but there won't be much left at that point.
Personally I find that even when using god hands or a hobby knife to remove the remaining nub I end up with a stress mark directly where it was. Sanding the remainder down is really the best if you aren't painting.

>>11154461
This is correct, but I am a lazy modeler, godhand snip and buffing with my fingernail is good enough for me.

Anyone got their hands on the new knight kits already?

File: gunpla pack.jpg (2.31 MB, 3712x3024)

2.31 MB JPG

>>11149210
rest of my order arrived, GM and Zaku half cannon, thanks china post

File: IMG_2229.jpg (1.32 MB, 2048x1536)

1.32 MB JPG

Built a thing for the groupbuild. I'm not confident that I'll get the whole thing to work properly as per my original vision, but this is probably one of the more complicated parts that I just barely managed to make work without having to build parts from scratch. One of the pieces snapped shortly after taking the pictures, but I think I have a way to fix and reinforce it that won't require mad scratchbuilding skills.

>>11159494
Very neat anon, loving the look of this so far. Looking forward to losing to you!

>>11159393
you probably paid like a dollar for shipping, the fuck you expect? The red carpet treatment?

>>11159494
This looks like a canceled boss from a PS1 3D shmup. I'm specifically thinking Einhander.

File: 1559121904958.jpg (88 KB, 1052x698)

88 KB JPG

>>11159393
Are the parts broken?

>>11159393
That sucks. Hopefully nothing inside is broken, personally though I like to keep the front box art.

>>11159393
That happened to me with the Gundam Base Thunderbolt and Psycho Zaku from P Bandai a few months back, luckily the box was the only damage and the parts were all fine.

>>11160143
I sold 2 kits and shipped them. Usps smashed the box pretty bad. Buyer was pissed at me. Like I used a good box and put some padding in to keep it from shufting around. Not much I can do about usps driving forklifts on boxes.

>>11160216
China post is way worse than USPS tho but it's likely due to how much farther the packages travel. My China post stuff always comes smashed up like that it's pretty much expected.

>>11160284
I've ordered stuff from England, Denmark, Peru, Russia and Ukraine that came dirty, but never banged up or dented.
All my chinese boxes have come smashed.

I've had a ton of Amazon packages come in just as bad conditions, but i do order more shit from them and returns/refunds are near instant. Amazon is by far the worst delivery service in the US. USPS > FedEx > UPS > Amazon.

Did Hemoxian do any more kits after the Thor one?

>>11161119
i can't tell, arr rook arike 2 watashi
https://weibo.com/u/7772681952

Considering topcoating some of the kits I got (Never done before).
I don't paint much, but I'll ask anyways.

I can find Mr.Hobby matte spray here, is the premium upgrade worth it or will a few extra layers get the same result? I know I'll already have to postpone spraying anyways, as the moisture's too high here.
Said spray is all good with waterdecals/stickers/gundam markers/tamiya paint? Read something about some coats not mixing well some time ago.

How well does it hide nubmarks? Some I got are the glossy/darker kind with a faint lighter edge around them. Will sanding down more and spraying be enough to hide the new scratches from it?

I'll probably try it out first on a cheap kit anyways I guess, just don't want to waste the money as hobby supplies are a bit pricey to get here.

>>11161183
You don't want or need to do more than one coat. You should practice on something else first if this is your first time. Your are aiming for a coat wet enough to meld into one smooth continuous layer, but not so wet that it pools or gets thick and drippy. Spray in short bursts from around 10-12" away.

Yes, price matters, better topcoat will be more matte. Matte topcoat quality is judged by how little light it reflects. Mr. Hobby is generally considered to be one of the best (it is the best in my book).

File: 30MM 1144 EXM-A9rk SPINAT(...).jpg (205 KB, 1500x1500)

205 KB JPG

Do you think a gold color would work here for panel lining?

File: S02.width-980.jpg (153 KB, 980x1301)

153 KB JPG

>>11161489
yes

File: curing light.jpg (801 KB, 1600x985)

801 KB JPG

Made a thing for the modelling desk out of a microphone stand, a 160W UV lamp and some nuts and bolts lying around.
Instant putty curing and all that.

>>11162632
neat.

>>11162632
This is the type of shit I expect to see from a high-tier modeler such as yourself. Cool shit.

bros i need to glue some small parts together
the parts are abs, which type of glue can i use?

>>11163329
Post pic of part.

>>11161805
hm okay but here the major part of the armour is white and not metal/grey

>>11163896
it'll probably look even MORE fire because of that. pick a good shade of gold that matches the plastic well, and the panel lines will appear to just be a part of the gold, like an underlayer showing through the gaps in the white.

>>11162632
do you have 18 nippers? that looks like a lot of nippers. why would you need that many?

>>11163329
Super glue or 2 part epoxy very carefully, tamiya also sell ABS plastic cement but you probably already have some super glue

File: workbench2024.jpg (801 KB, 1600x1193)

801 KB JPG

>>11163916
>18
Most of them are pliers and cutters of different type. There are only 4 that are actual straight nippers, 2 are for rough cuts and 2 are for fine cuts.

File: GX-MNrGaUAI7NcY.jpg (111 KB, 1024x768)

111 KB JPG

People on Twitter are already posting custom jobs, and HLJ hasn't even given me a message over whether or not they're going to fulfill my order

>>11164132
I'm sorry anon, you're stuck with me in backorder hell.

>>11164150
Do we at least know that there will be reprints? Or should we try our luck with other stores? HLJ is kind of unique in that they don't charge your card on pre-order, the other places I shop from don't do that so I don't want to make an order from, for example, USAGS if HLJ is going to get new stock first

File: file.png (605 B, 85x39)

605 B PNG

>>11164132
>date of release passed
>it has picrel now instead of either Order Stop or Sep Release
They got their shipment in, you didn't order early enough. You have a backorder for the inevitable rerun in 3 months now.

>>11164132
oh god i was planning to skip these but this kind of looks fucking cool

>>11164132
>>11164150
>>11164193
Is HLJ just purposely holding onto stock because of the weak yen or something? Their stock is way poorer than it used to be and everywhere else seems to be getting better.

>Order from Bandai finally comes after multiple delays
>Box art isn't washed out
Premium Scamdai indeed.

>>11164511
Does feel like they get little stock. Had a lot of plamo that I ordered early end up being pushed to backorder.
Then once said backorder stock is in, they have enough to hold until a sale to discount them...

>>11164600
Not to be conspiratorial but if often feels like when I give up and ship one or two items they suddenly have more ready for me the next day. And they have no method to cancel or add things to the shipment even if they haven't begun processing them yet.

>>11164511
>>11164600
Fucking this, everybody shits on BBTS but I swear HLJ is the most deserving of scorn. Nothing in stock and ALWAYS backordered.

>>11164606
I still find it stupid that they apparently never enforced their warehouse timelimit.
I always put together a shipment within the 60 days limit, meanwhile others had items for years in theirs.......
And then they fucking e-mail me to beg and ship my items the hour after I placed an order.

>>11164611
I have a single item in my warehouse, it's been in there, alone, for 11 months now. The emails don't mean anything, just automated messages they never disabled because it still get's people to ship.

File: furio-sopranos.gif (149 KB, 220x127)

149 KB GIF

>>11164611
They were too generous and should of refunded everybody and canceled the orders if they really wanted to fix the problem.

>>11164615
Or go with the middleman approach: If you don't ship it asap, they'll keep the item and your money.

File: o0jvpjuu99v01.jpg (23 KB, 639x428)

23 KB JPG

>>11164626
That would be the evil route not middleman.

>>11164511
Maybe it has to do with the "Japanese buyers are telling Bandai to label this storefront as a foreign seller because they're middleman-ing for non-Japanese buyers" thing I read about either here or on /m/. I think Surugaya and Mandarake are having the same problem.

>>11164628
Some middleman services actually do it.

>>11164193
>>11164511
This feels like a scam.

>>11164885
They haven't taken any money yet and you can cancel the orders. They also don't really make any promises other than in might be fulfilled in the future. It just sucks.
What is kind of a scam is it being difficult to get refunds on things in the warehouse because you don't want to ship a single item. I wish they'd go through with what their emails say and wipe your warehouse after 90 days.

>>11164511
Their stock is no different, this is a brand new line based on a big IP. Every Bandai item sells out super fast & Bandai provides no concrete number of units they will be allocated beforehand.

>>11164611
>they never enforce their time limit
They do, it's just not 60 days anymore and you only have yourself to blame for not reading any of the policy updates. It was unlimited due to Covid for years but now it is 6 months.

>>11164885
Only if you are retarded. A scam would make them money. They don't get anything until you get the item. USAGS is more of a scam b/c they allow more pre-orders than they will get stock then fulfill them all over years of restocks.

>>11164630
That was pure "Source: My Ass" conspiracy theory nonsense.

>>11164193
I have heard that HLJ will fulfill all their domestic orders first before fulfilling international orders

File: IMG_20240921_231121326_HDR~2.jpg (974 KB, 3387x1786)

974 KB JPG

Why did no one tell me how cool blacklights are?

>>11165157
Damn bro you are a true marksman with that cum hose of yours.

>>11165188
Yep.
The reason my acerby-b's eyes glow isn't the material. I just came into her sockets.

Am I just blind this morning, I thought the guide used to have a top coat section. I grabbed some Mr SuperClear Matte but now I'm second guessing myself on if I should have gotten a different one.

File: 20240827_103645.jpg (2.94 MB, 4000x3000)

2.94 MB JPG

>>11166010
What is your issue with it? Its pretty good stuff, maybe tamiya matte is better but pretty close.

>>11166399
Seeing a lot of people saying they are using a "flat" coat. Maybe my English is just off and that is the Matte?

>>11166408
Flat is technically an even duller finish than matte but a lot of people don't care to differentiate and the it's not that large a difference in gloss anyway.

File: 20240922_130335.jpg (687 KB, 4608x3456)

687 KB JPG

I bought this set because a lot of people were complaining about hard it was for them to build it. I like hard builds, I want the challenge.

File: 20240922_130548.jpg (674 KB, 4608x3456)

674 KB JPG

>>11166449
This was not a hard build, its actually one of the easiest kits I've built. I would almost feel disappointment if he didn't come out looking so good. Starting to think people who insist gundam kits are hard to build are actually just retarded.

>>11166449
>>11166451
One of my friends actually bought it as their first gunpla and they didn't have any issues. I have to insist they sanded the nubs off though because they were going to leave them. The only thing they did prior was an acerby or something like it.

>>11166451
Also genuinely never heard someone say gundam kits are hard before, only ever heard other hobbyists say they are too basic and easy because the parts slot together instead of needing glue

>>11166451
Gundam kits are just bionicles for weebs.

>>11166459
One of the main complaints I saw was the armor falling off or it was flimsy, but this is one of the most solid feeling gundam figures I have built.

File: mr-color.jpg (127 KB, 789x517)

127 KB JPG

>>11166408
Translations can be confusing, always look at the Japanese name first:
>光沢 = gloss
>半光沢 = semi-gloss
>つや消し = matte, flat, etc
MrColor has only these 3 finishes.

"Mr SuperClear Matt" and "Mr SuperClear UV Cut Flat" are basically the same thing, the latter also has some UV blocker in it.

File: 1421323969703.jpg (262 KB, 1076x922)

262 KB JPG

>>11166010
Mr. Super Clear Flat is the "best" matte topcoat in the sense that it reflects the least light. If you have the grey can pictured here you're all good

>>11166459
"Hard" builds to me are ones with pain in the ass parts, like sanding Zaku 2.0 tubes, or ones with a lot of dull repetition, like building a shitload of funnels. There is also just plain bad engineering that causes confusing or difficult to assemble sections sometimes. You rarely see that with Bandai anymore, but other plamo, for sure.

>>11166683
I feel like too many people confuse tedium with difficulty. Or maybe too many people with short attention spans get into model hobbies.

File: agg-wip01.jpg (1.4 MB, 1600x3351)

1.4 MB JPG

>>11166459
They can be as hard as you want.

>>11166704
Well, now you're splitting hairs a little I think. "Hard" doesn't even have a specific definition, it's whatever you personally find challenging. And fair call, I do have diagnosed ADHD and sticking to tedious builds is a genuine challenge for me, so I call that hard. On the other hand, things that many people seem to think are difficult (like waterslides, dry transfers, and precisely placing stickers) are easy for me.

>>11164511
I'm really putting my tin foil hat when it comes to Bandai these days. I get that there was increased demand during the pandemic because of people getting into the hobby, but we're 4 years removed from the brunt of it. Normies would have bailed on the hobby by now because that's what they fucking do. My local Hobby Lobby is back to being mostly used by literal Boomers according to the cashier.

But the stock on online retailers still isn't anywhere near 2018-2019 levels again. That makes me think Bandai is purposely printing low numbers of everything they make to save on money.

>>11167254
It's always possible that management are just being completely retarded rather than malicious

>>11166727
What did that mod do to the kit?

File: agg01.jpg (413 KB, 2000x1462)

413 KB JPG

>>11167558
Moving monoeye, rotating blades, etc etc.

>>11164166
if they are like other lines (Figurise Amplified Digimon) there may be an additional reprint, but if it's similar to Macross or Yu-Gi-Oh! then it will be just one and that's all.

>>11164406
you may as well skip them, the time to order them was when they were announced. Right now if you want one you will have to order from a local shop or scalpers.

>>11164903
according to their new policies it's after 6 months (180 days). The 90 days limit is outdated info.

>>11167602
Well they aren't enforcing it either way so it doesn't matter what they say the limit is

>>11167598
i miss working for a distributor. I never had to put in any effort to get hype kits, I'd just pull one from the case when it came in.

File: Gundamlegs.jpg (280 KB, 1080x1349)

280 KB JPG

Any idea what legs were used? Wanted to replicate this with the Rx-78 2.0

>>11168505
They look like generic Machineca legs to me, so any FAG or MD or even some generic chinese kit off Aliexpress should work.

>>11144380
What size of scriber is good if i just want too deepen the panel lines?

>>11168576
0.1mm for HG and RG
0.15mm for MG and RE/100

>>11168601
What about 0.2mm? Also what is some good and cheap scriber brand?

>>11168505
Looks like Megami Device stuff, but most girlpla will work.

>>11167605
>Well they aren't enforcing it either way
They are.
I had a kit I didn't want in my warehouse and after 180 days they automatically removed it and gave me the store credit.

>>11168907
I have several items in my warehouse with 0 days remaining.
Also store credit and not an actual refund? Probably gonna be better to cancel new orders if you don't want to ship them from now on

>>11168979
>0 days remaining
They haven't updated their website, so the "remaining" counter still counts 90 days.
In their reminder emails however they show the number of days the item has been in the warehouse and that number is correct.

>>11167564
why does a mining MS need missile pods?, was militarized an became the first MS for combat?

>>11170589
Gotta crack the harder rocks somehow

File: DSC_0042.jpg (199 KB, 2000x1330)

199 KB JPG

>>11170679

File: DSC_0053.jpg (353 KB, 3009x3655)

353 KB JPG

>>11170687

File: Agg_EMS-05_detail_.png (2.14 MB, 872x1280)

2.14 MB PNG

>>11170589
>why does a mining MS need missile pods
Because they designed it that way?

File: DSC_0032.jpg (235 KB, 1500x1736)

235 KB JPG

>>11170687

>>11170724
HGCE Justice when?

Seed suits are ugly :)

File: IMG_20240925_204127.jpg (2.29 MB, 4624x3468)

2.29 MB JPG

Snapbuilt the sharbot, can't wait to build his friend!

>>11170687
>>11170693
>>11170724
personally it looks fine to me, yeah its kinda thick but its not bad

for panel lining you can look into a sakura pigma micron 005 pen
also pour type gundam markers

>>11171089
im not sure! ill check my local model shop if they have it in stock :)

this version its a little janky though, some pieces keep falling off. idk how the HGCE version is.

>>11171546
yeah i was thinking about buying a liner pen instead of a marker. ill try to find a store that sells those pens. i think the hobby store near me should sell those.

File: 19b54f20-0776-43f0-bae8-a(...).jpg (204 KB, 1024x734)

204 KB JPG

A shitton of free* buildings for your dioramas. Not very detailed, but should look fine at 1/144 or smaller scale.

*You still need to print and paint them.

>>11172605
Forgot the link:
https://cults3d.com/en/users/kabrumble/3d-models

New thread: >>11172657